• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1087-1094
• /
• 2008

The drilled pier foundation is widely used to support transmission line structures due to its simplicity of construction. When this foundation type is used in conjunction with a single shaft or H-frame structure, it is subjected to a high overturning moment, combined with modest vertical and shear loads. Since the length and diameter of drilled piers are often governed by a maximum permissible deflection, many drilled piers being installed today are very conservatively designed. In this study, Five prototype field-tests (1/8 scale) have been conducted in order to determine the lateral resistance of drilled pier foundation for single pole structures. These test results reveal the test piers behaved essentially as rigid bodies in soil (6D) and the center of rotation of the pier were typically 0.6~0.4 of the pier depth below ground surface. Test results also show the relationship between the applied load and the deflection at the top of the pier is highly nonlinear.

• Geomechanics and Engineering
• /
• 제30권6호
• /
• pp.579-586
• /
• 2022

Pile-supported structures are installed on saturated sloping grounds, where the ground stiffness may decrease due to liquefaction during earthquakes. Thus, it is important to consider saturated sloping ground and pile interactions. In this study, we conduct a centrifuge test of a pile-supported structure, and analyze the p-y_p loops, p-y_p loops provide the correlation between the lateral pile deflection (y_p) and lateral soil resistance (p). In the dry sand model (UV67), the p-y_p loops stiffness increased as ground depth increased, and the p-y_p loops stiffness was larger by approximately three times when the pile moved to the upslope direction, compared with when it moved to the downslope direction. In contrast, no significant difference was observed in the stiffness with the ground depth and pile moving direction in the saturated sand model (SV69). Furthermore, we identify the unstable zone based on the result of the lateral soil resistance (p). In the case of the SV69 model, the maximum depth of the unstable zone is five times larger than that of the dry sand model, and it was found that the saturated sand model was affected significantly by kinematic forces due to slope failure.

• 한국지반공학회논문집
• /
• 제22권10호
• /
• pp.165-172
• /
• 2006

본 연구에서는 합천사에 매설되어 측방변형을 받는 무리말뚝의 거동특성을 분석하였다. 무리말뚝의 위치, 말뚝의 간격과 말뚝배열이 미치는 무리말뚝의 영향을 알고자 하였다. 실험결과는 다음과 같다. 무리말뚝에서는 모멘트 형상은 단독말뚝과 유사하나 최대 휨모멘트의 발생깊이가 깊어지고, 그 크기는 감소하였다. 말뚝의 중심간격이 증가할수록 최대휨모멘트비$(R_M)$와 수평력분담비$(R_F)$는 증가하였다. 지반변형에 따른 $R_M$은 열방향에서는 후열, 전열, 중간열의 순으로 크게 나타났고 줄방향에서는 내측보다 외측이보다 크게 나타났다.

• Steel and Composite Structures
• /
• 제22권1호
• /
• pp.79-89
• /
• 2016

Cold formed steel shear panel is one of the main components to bearing lateral load in low and mid-rise cold formed steel structures. This paper uses finite element analysis to evaluate the stiffness, strength and failure mode at cold formed steel shear panels whit steel sheathing and nonlinear connections that are under monotonic loading. Two finite element models based on two experimental model whit different failure modes is constructed and verified. It includes analytical studies that investigate the effects of studs and steel sheathing thickness changes, fasteners spacing at panel edges, one or two sides steel sheathing and height-width ratio of wall on the lateral load capacity. Dominant failure modes include buckling of steel sheet, local buckling in boundary studs and sheet unzipping in the bottom half of the wall.

• 한국산업융합학회 논문집
• /
• 제25권4_2호
• /
• pp.611-619
• /
• 2022

In this study, the seismic performance of low - rise piloti buildings with concentric core (shear wall) position is analysed and reviewed based on KDS 41. The prototype is selected among the constructed low - rise piloti buildings with concentric core designed based on KBC 2005 which was used for many low - rise piloti buildings construction. The seismic performance of the building shows plastic behavior in X-direction and elastic behavior in Y-direction. The inter-story drift is lager than that of concentric core case and is under the maximum allowed drift ratio. The displacement ratio of first story is much lager the that of upper stories, and the frame structure in the first story is evaluated as vulnerable to lateral force. Therefore, low - rise piloti buildings with concentric core need the diminishment of lateral displacement and reinforcement of lateral resistance capacity in seismic design and seismic retrofit.

• 한국지진공학회논문집
• /
• 제24권1호
• /
• pp.29-37
• /
• 2020

This study is to investigate the effect of a retrofitted reinforced concrete frame with non-seismic details strengthened by embedded steel moment frames with an indirect joint, which mitigates the problems of the direct joint method. First, full-scale experiments were conducted to confirm the structural behavior of a 2-story reinforced concrete frame with non-seismic details and strengthened by a steel moment frame with an indirect joint. The reinforced concrete frame with non-seismic details showed a maximum strength of 185 kN at an overall drift ratio of 1.75%. The flexural-shear failure of columns was governed, and shear cracks were concentrated at the beam-column joints. The reinforced concrete frame strengthened by the embedded steel moment frames achieved a maximum strength of 701 kN at an overall drift ratio of 1.5% so that the maximum strength was about 3.8 times that of the specimen with non-seismic details. The failure pattern of the retrofitted specimen was the loss of bond strength between the concrete and the rebars of the columns caused by a prying action of the bottom indirect joint because of lateral force. Furthermore, methods are proposed for calculation of the specified strength of the reinforced concrete frame with non-seismic details and strengthened by the steel moment frame with the indirect joint.

• 한국산학기술학회논문지
• /
• 제13권3호
• /
• pp.1396-1404
• /
• 2012

복합말뚝은 서로 다른 재질을 사용하여 말뚝을 구성하는 말뚝으로 상부는 강관말뚝 하부는 콘크리트 말뚝으로 구성된 말뚝을 선 굴착 공법으로 시공하였다. 말뚝에는 7쌍의 변형률계와 경사계를 설치하여 말뚝의 수평재하시험 중 말뚝에 작용하는 응력과 변위를 측정하였다. 측정된 계측치는 여러 가지 이론적 공식을 이용하여 분석 비교하는 역 해석을 수행하였다. 분석결과 공식들로부터 예측한 말뚝에 작용하는 응력은 실제 측정된 값보다 크게 평가 되었으며, 말뚝상부에 응력이 크게 측정되다가 말뚝깊이에 따라 급격하게 감소하는 경향을 보였다. 측정된 응력은 모두 말뚝재질의 응력을 초과 하지 않아 복합말뚝의 설계개념을 검증할 수 있었다.

• The Journal of Korean Physical Therapy
• /
• 제35권5호
• /
• pp.132-138
• /
• 2023

Purpose: This study compared the effects of the elastic resistance and general training for college Taekwondo athletes, and investigated the biomechanical ability and lower extremity function according to the movement speed of the knee joint. Methods: Twenty university student Taekwondo athletes participated voluntarily in this study. The subjects performed general resistance training for four weeks, followed by elastic resistance training for another four weeks. The biomechanical parameters during the fast and slow isokinetic conditions, Y-balance ability, and vertical jump ability were measured three times: before training, after general resistance training, and after elastic resistance training. Statistical analysis was performed under isokinetic conditions and the intervention effect. Results: The biomechanical ability differed significantly between fast and slow isokinetic conditions (p<0.05). An analysis of the training method revealed a significant difference in the maximum knee extension speed and the posterior-lateral direction of the Y-balance test (p<0.05). Conclusion: Elastic resistance training had a more positive effect on the functional task performance than biomechanical factors related to muscular strength compared to general resistance training. In addition, speed-related knee biomechanical information of subjects with strong physical abilities could be utilized in sports physiotherapy.

• 한국지반공학회논문집
• /
• 제35권6호
• /
• pp.39-48
• /
• 2019

본 연구는 원심모형실험을 이용해 건조 사질토 지반에 근입된 모노파일의 수평 반복하중에 대한 거동을 연구하였다. 실험에 사용된 지반 시료는 상대밀도 80%에서 마찰각이 $38^{\circ}$인 건조 주문진 표준사를 사용했다. 실험 과정은 우선 반복하중의 크기를 결정하기 위해 정적 하중 실험을 수행하여 극한하중을 결정하였다. 이를 통해 도출된 극한 하중 값의 30%, 50%, 80%, 120%을 반복하중의 값으로 결정하였고, 반복횟수는 100회로 수행되었다. 이 결과를 통해 실험 반복하중 p-y 곡선을 산정하였고 도출된 하중 별 최대 지반반력점들을 이용하여 깊이 별 반복하중 p-y 중추곡선을 도출하였다. 이를 기존 p-y 곡선과 비교 결과, 동일 깊이에서 초기기울기가 API(1987) p-y 곡선보다 과소평가 되었으며, 극한지반반력은 과대평가되었다. 또한, 동적 p-y 곡선과 비교하였을 때, 동일 깊이에서의 반복하중 p-y 중추곡선의 초기기울기와 지반반력이 작게 평가되었다. 이는 말뚝이 받는 하중 조건에 따라 p-y 곡선을 다르게 적용해야 할 것으로 판단된다.

• Steel and Composite Structures
• /
• 제18권6호
• /
• pp.1569-1582
• /
• 2015

This study explores the lateral deflections of diagonal braces in concentrically-braced earthquake-resisting frames. The performance of this widely-used system is often compromised by the flexural buckling of slender braces in compression. In addition to reducing the compressive resistance, buckling may also cause these members to undergo sizeable lateral deflections which could damage surrounding structural components. Different approaches have been used in the past to predict the mid-length lateral deflections of cyclically loaded steel braces based on their theoretical deformed geometry or by using experimental data. Expressions have been proposed relating the mid-length lateral deflection to the axial displacement ductility of the member. Recent experiments were conducted on hollow and concrete-filled circular hollow section (CHS) braces of different lengths under cyclic loading. Very slender, concrete-filled tubular braces exhibited a highly ductile response, undergoing large axial displacements prior to failure. The presence of concrete infill did not influence the magnitude of lateral deflection in relation to the axial displacement, but did increase the number of cycles endured and the maximum axial displacement achieved. The corresponding lateral deflections exceeded the deflections observed in the majority of the previous experiments that were considered. Consequently, predictive expressions from previous research did not accurately predict the mid-height lateral deflections of these CHS members. Mid-length lateral deflections were found to be influenced by the member non-dimensional slenderness (${\bar{\lambda}}$) and hence a new expression was proposed for the lateral deflection in terms of member slenderness and axial displacement ductility.