• Journal of the Korean Operations Research and Management Science Society
• /
• v.29 no.3
• /
• pp.41-61
• /
• 2004

The purpose of this paper is to construct $\ulcorner$CIDEAR(Cross Impact-DEA-AR)$\lrcorner$ model which evaluates proposed R&D projects considering cross impact among them and selects proper projects to utilize resources efficiently as well as to maximize efficacy of investments. For this purpose, $\ulcorner$CIDEAR$\lrcorner$ model is designed as the following six steps. $\ulcorner$Decision Theory Evaluation Model$\lrcorner$ is for setting and selecting the evaluation items according to the structured procedure of evaluation system. The priority of items is decided at $\ulcorner$AR Decision Model$\lrcorner$$\ulcorner$Cross Impact Estimation Model$\lrcorner$ is for computing the final probability of success and the result is used to revise the evaluation results of $\ulcorner$Decision Theory Evaluation Model$\lrcorner$. $\ulcorner$Resource Performance Analysis Model$\lrcorner$ classifies the proposed R&D projects on the basis of required resources and expected performance. Consequently, the possibility of bias of project selection can be prevented. $\ulcorner$Priority Oder Decision Model$\lrcorner$ is for computing the efficacy of proposed projects. Finally, $\ulcorner$Efficacy-Efficiency Cause Analysis Model$\lrcorner$ analyzes the structure of efficacy and efficiency of the projects. The major findings and significances of this study are summarized as follows: (1) $\ulcorner$CIDEAR$\lrcorner$ model can deal with the affairs of R&D projects having the characteristics of mutual independence as well as mutual dependence in the point of efficacy and efficiency. Hence, it is possible to evaluate and select R&D projects more accurately. (2) It can be possible to raise the possibility of projects success. R&D manager can use the information for project management because the efficacy-efficiency structure of selected projects can be analyzed. (3) We proved the usefulness of the constructed $\ulcorner$CIDEAR$\lrcorner$ model using an case about twenty-one R&D projects of a leading company of electronic industry in Korea.

• Journal of Korea Technology Innovation Society
• /
• v.15 no.4
• /
• pp.815-836
• /
• 2012

Corporate Laboratories have been a key driver of Korea's economic growth through attaining technology competitiveness. The study is focused on selecting outstanding small and medium corporate laboratories with high R&D capability and fostering the selected laboratories. The main topics of this study are to establish logics regarding the selection process and to propose the implementation schemes of the process. For the selection of outstanding laboratories, this study presents a evaluation indicators based on logic model and verification of the validity of following evaluation indicators through a Pilot test. The evaluation indicators from this study are expected to be in practical use as a reference for support policies of outstanding laboratories' R&D activities. For corporations, these indicators can be used to examine their R&D capability. This study also suggests differentiated policy support measures using the findings to maximize the effectiveness of the selection process.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1542-1543
• /
• 2007

This paper presents the effect of driving waveform for piezoelectric bend mode inkjet printhead with optimized mechanical design. Experimental and theoretical studies on the applied driving waveform versus jetting characteristics were performed. The inkjet head has been designed to maximize the droplet velocity, minimize voltage response of the actuator and optimize the firing frequency to eject ink droplet. The head design was carried out by using mechanical simulation. The printhead has been fabricated with Si(100) and SOI wafers by MEMS process and silicon direct bonding method. To investigate how performance of the piezoelectric ceramic actuator influences on droplet diameter and droplet velocity, the method of stroboscopy was used. Using the water based ink of viscosity of 11.8 cps and surface tension of 0.025N/m, it is possible to eject stable droplets through 64 nozzles average velocity of 4.05 m/s with standard deviation of 0.06 m/s and average diameter of $29.2\;{\mu}m$ with standard variation of $0.5\;{\mu}m$.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.3
• /
• pp.75-83
• /
• 2015

This article investigates the impact of SMEs' R&D expenditure, government R&D funding, the number of funded by Government R&D programs on the employment growth rate. This study also explores whether government R&D funding and the number of funded by Government R&D programs have interaction effects between SMEs' R&D expenditures and the employment growth rate. The results show that SMEs' R&D expenditure and government R&D funding have a positive effect on the employment growth rate. The rest of variables have no significant direct effects on the employment growth rate. The government R&D funding has a interaction effect between SMEs' R&D expenditures and the employment growth rate. Especially, the firm group of high-level innovation capabilities has a positive effect on the employment growth rate. The results explain that the government R&D funding influences SMEs' employment positively and the impact of the government R&D funding on employment is more effective in the firm group of high-level innovation capabilities. Therefore, Government provides differentiation strategy of R&D funding by innovation capabilities of SMEs and can maximize the employment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2B
• /
• pp.154-163
• /
• 2006

The importance of R & D investment has dramatically been increased as industrial paradigm rapidly changes to knowledge-based economy. In order to preserve recent economic growth and reinforce competitive advantage, government policy and regulatory framework needs to be reshaped in ways that minimize the distorted use of limited resources and maximize the efficiency of R & D investment. In this regards, this paper aims to investigate the influence of R & D investment in national economic growth and to compare the effectiveness of IT R & D investment with other industries, in respect to the time lag.

• The KSFM Journal of Fluid Machinery
• /
• v.5 no.4 s.17
• /
• pp.11-18
• /
• 2002

A turbopump system composed of two pumps and one turbine is considered. The turbine composed of a nozzle and a rotor is used to drive the pumps while gas passes through the nozzle and potential energy is converted to kinetic energy, which forces the rotor blades to spin. In this study, an aerodynamic design of turbine system is investigated with some pre-determined design requirements (i.e., pressure ratio, rotational speed, required power, etc.) following Liquid Rocket Engine (L.R.E.) system specifications. For simplicity of turbine system, impulse-type rotor blades for open-type L.R.E. have been chosen. Usually, the open-type turbine system requires low mass flow-rate compared to close-type system. In this study, a partial admission nozzle is adopted to maximize the efficiency of the open-type turbine system. A design methodology of turbine system was introduced. Especially, partial admission nozzle was designed by means of simple empirical correlations between efficiency and configuration of the nozzle. Finally, a turbine system design is presented for a 10 ton thrust level of L.R.E.

• ETRI Journal
• /
• v.27 no.2
• /
• pp.206-218
• /
• 2005

We measure and compare externalities of IT and R&D capital stocks in different Korean industry sectors using inter-industry input-output tables of 1985, 1990, 1995 and 2000. We also compute the multiplier effects that relate to the directions of future economic effects. The key findings are as follows. First, we observed continuous capital deepening in all nine industries over the period of 1985 to 2000. Second, the backward multipliers of IT capital were the highest in the manufacturing industry. As for inter-industry externalities, the indirect backward multipliers, which exclude intra-industry backward multiplier effects within the industry, were also the highest in the manufacturing industry. Third, the forward multiplier effects of IT capital stock were the most substantial in the construction industry during the 1980s and in the manufacturing industry thereafter. Finally, using the transition multiplier matrix reflecting the backward effects of the two capitals in the past, the economic backward effects, especially the external economic effects, are predicted to increase through 2010 among all industries. The above findings suggest that, in order to maximize the forward and backward effects of the ever-increasing IT capital, we need to formulate an industry policy reducing the cost of capital accumulation in the manufacturing industry through improvement in productivity of the IT industry.

• 유체기계공업학회:학술대회논문집
• /
• 2000.12a
• /
• pp.145-152
• /
• 2000

A turbopump system composed of two pumps and one turbine is considered. The turbine composed of a nozzle and a rotor is used to drive the pumps while gas passes through the nozzle, potential energy is converted to kinematic energy, which forces the rotor blades to spin. In this study, an aerodynamic design of turbine system is investigated using compressible fluid dynamic theories with some pre-determined design requirements (i.e., pressure ratio, rotational speed, required power etc.) obtained from liquid rocket engine (L.R.E.) system design. For simplicity of turbine system, impulse-type rotor blades for open type L.R.E. have been chosen. Usually, the open-type turbine system requires low mass flow rate compared to close-type system. In this study, a partial admission nozzle Is adopted to maximize the efficiency of the open-type turbine system. A design methodology of turbine system has been introduced. Especially, partial admission nozzle has been designed by means of simple empirical correlations between efficiency and configuration of the nozzle. Finally, a turbine system design for a 10 ton thrust level of L.R.E is presented.

• Transactions of the Korean hydrogen and new energy society
• /
• v.31 no.5
• /
• pp.405-410
• /
• 2020

In this literature, we are introduce a basic design of multi energy hub based on natural gas governor station. Multi energy hub consists of turbo expender generator, phosphoric acid fuel cell, pressure swing adsorption, H₂ charging station, utilities and etc. We design a hybrid energy hub system that provides energy using these complex energies, and calculates the amount of electricity that can be produced and the amount of hydrogen charged through the process analysis. TEG and phosphoric acid fuel cell produce 2,290 to 2,380 kW and can supply electricity to 500 houses. In addition, By-product H₂ gas is refined to H₂ vehicle fuel. This will help maximize the balance of energy demand and supply and improve national energy efficiency by integrating unused decompression energy power generation technology and various power generation/heat source technologies.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.05a
• /
• pp.112-117
• /
• 2005

The result management of R&D projects which carried by national research organization, research institute contributed by government, many universities and enterprises through intra system has not been processed in regular order. To maximize results of R&D products, we must draw up a plan for effective management, spread, and application. In this paper, we argue on the design and implementation of web-based system for managing R&D results(project, paper, book, seminar, intellectual property, technology transfer information, etc) systematically. This system is operated within intranet system, and the data managed by this result management system will be used for related information management through connection with research net based national R&D structure but also it will be major knowledges available for researches executed in many research institutes and organizations.