• 제목/요약/키워드: maxillary

검색결과 3,291건 처리시간 0.026초

부정교합 분류에 따른 상악 중절치의 치관-치근 각도(Collum Angle)에 대한 연구 (MAXILLARY INCISOR CROWN-ROOT ANGLE(COLLUM ANGLE) IN DIFFERENT MALOCCLUSIONS)

  • 홍희숙;백형선
    • 대한치과교정학회지
    • /
    • 제25권4호
    • /
    • pp.453-463
    • /
    • 1995
  • 측모두부 방사선 계측사진에서 일반적으로 사용하는 상악 중절치의 장축은 치근첨(Root Apex)과 절치단(Incisor Edge)를 연결한 선을 사용하지만 일부 부정교합 환자에서는 치관장축과 치근장축이 일치하지 않는 경우가 있으며 이 경우 두장축이 이루는 각을 치관-치근각도(Collum Angle)라 하며, 이 각도는 교정치료의 진단 및 치료과정에 고려되어져야 한다. 본 연구에서는 제 I 급 부정교합 환자 31명, 제 II급 1류 부정교합 환자 30명, 제 II 급 2류 부정교합 환자 31명, 제 III급 부정교합 환자 31명에서 치관-치근 각도를 계측하여 부정교합과의 상관관계를 알아보았으며, 측모두부 방사선 계측사진에서 사용되는 항목들과의 상관분석을 통하여 다음과 같은 결론을 얻었다. 1. 부정교합 분류에 따른 치관-치근 각도의 평균값은 제 I 급 부정교합에서는 $3.11^{\circ}{\pm}3.54^{\circ}$, 제 II급 1류 부정교합에서는 $1.23^{\circ}{\pm}2.41^{\circ}$, 제 II급 2류 부정교합에서는 $3.77^{\circ}{\pm}4.39^{\circ}$, 제 III급 부정교합에서는 $3.90^{\circ}{\pm}4.08^{\circ}$ 이었다. 2. 제 II급 1류 부정교합군의 치관-치근 각도와 제 II급 2류, 제 III급 부정교합군의 치관-치근 각도에 유의성 있는 차이가 나타났다. 3. 치관-치근 각도와 측모두부 방사선 계측사진에서 사용되는 다른 항목들과의 상관관계에서 제 I급 부정교합에서는 IMPA, 제 II급 1류 부정교합에서는 Wits, 제 II급 2류 부정교합과 제 III급 부정교합에서는 Overbite이 가장 큰 상관성을 보였다.

  • PDF

Treatment modalities for Korean patients with unilateral hemifacial microsomia according to Pruzansky-Kaban types and growth stages

  • Yang, Il-Hyung;Chung, Jee Hyeok;Yim, Sunjin;Cho, Il-Sik;Kim, Sukwha;Choi, Jin-Young;Lee, Jong-Ho;Kim, Myung-Jin;Baek, Seung-Hak
    • 대한치과교정학회지
    • /
    • 제50권5호
    • /
    • pp.336-345
    • /
    • 2020
  • Objective: To investigate the treatment modalities (Tx-Mods) for patients with unilateral hemifacial microsomia (UHFM) according to Pruzansky-Kaban types and growth stages. Methods: The samples consisted of 82 Korean UHFM patients. Tx-Mods were defined as follows: Tx-Mod-1, growth observation due to mild facial asymmetry; Tx-Mod-2, unilateral functional appliance; Tx-Mod-3, fixed orthodontic treatment; Tx-Mod-4, growth observation due to a definite need for surgical intervention; Tx-Mod-5, unilateral mandibular or bimaxillary distraction osteogenesis (DO); Tx-Mod-6, maxillary fixation using LeFort I osteotomy and mandibular DO/sagittal split ramus osteotomy; Tx-Mod-7, orthognathic surgery; and Tx-Mod-8, costochondral grafting. The type and frequency of Tx-Mod, the number of patients who underwent surgical procedures, and the number of surgeries that each patient underwent, were investigated. Results: The degree of invasiveness and complexity of Tx-Mod increased, with an increase in treatment stage and Pruzansky-Kaban type (initial < final; [I, IIa] < [IIb, III], all p < 0.001). The percentage of patients who underwent surgical procedures increased up to 4.2 times, with an increase in the Pruzansky-Kaban type (I, 24.1%; IIa, 47.1%; IIb, 84.4%; III, 100%; p < 0.001). However, the mean number of surgical procedures that each patient underwent showed a tendency of increase according to the Pruzansky-Kaban types (I, n = 1.1; IIa, n = 1.5; IIb, n = 1.6; III, n = 2.3; p > 0.05). Conclusions: These findings might be used as basic guidelines for successful treatment planning and prognosis prediction in UHFM patients.

좁은 치조골에서 사다리꼴형 디자인으로 개발된 단폭경임플란트의 증례 보고 (Case report of a newly designed narrow-diameter implant with trapezoid-shape for deficient alveolar bone)

  • 이사야;고미선;고석영;윤정호
    • 대한치과의사협회지
    • /
    • 제56권5호
    • /
    • pp.263-276
    • /
    • 2018
  • Long-term survival and prognosis of narrow-diameter implants have been reported to be adequate to consider them a safe method for treating a deficient alveolar ridge. The objective of this study was to perform case report of narrow-diameter implants with a trapezoid-shape in anterior teeth alveolar bone. A 50-year-old male patient presented with discomfort due to mobility of all of the maxillary teeth and mandibular incisors. Due to destruction of alveolar bone, four anterior mandibular teeth were extracted. Soft tissue healing was allowed for approximately 3 months after the extraction, and a new design of implant placement was planned for the mandibular incisor area, followed by clinical and radiological evaluation. Implant placement was determined using an R2GATE surgical stent. The stability of the implants was assessed by ISQ measurements at the first and second implant surgery and after prosthetic placement. At 1 and 3 months and 1 year after implantation of the prosthesis, clinical and radiological examinations were performed. Another 50-year-old male patient presented with discomfort due to mobility of the mandibular central incisors. For the same reason as in the first patient, implant placement was carried out in the same way after extraction. ISQ measurements and clinical and radiological examinations were performed as in the previous case. In these two clinical cases, 12 months of follow-up revealed that the implant remained stable without inflammation or additional bone loss, and there was no discomfort to the patient. In conclusion, computer-guided implant surgery was used to place an implant in an optimal position considering the upper prosthesis. A new design of a narrow-diameter implant with a trapezoid-shape into anterior mandibular alveolar bone is a less invasive treatment method and is based on the contour of the deficient alveolar ridge. Through all of these procedures, we were able to reduce the number of traumas during surgery, reduce the operation time and total treatment period, and provide patients with more comfortable treatment.

  • PDF

즉시하중시 상악 전치부에 식립된 임플란트 길이 변화에 따른 응력 분포의 삼차원 유한요소 연구 (Effect of Implant Length on the Immediate Loading at the Anterior Maxilla)

  • 이준석;김명주;권호범;임영준
    • 구강회복응용과학지
    • /
    • 제25권3호
    • /
    • pp.255-265
    • /
    • 2009
  • 즉시 하중에 대한 관심과 시도가 증가되고 있지만, 명확한 술식이 정립되어 있지는 않다. 본 연구에서는 상악 전치부 임플란트에서 즉시 하중시에 골과 임플란트에 나타나는 응력분포 양상을 3차원 유한요소법을 이용하여 알아보고자 하였다. 골질이 D3인 상악 전치부의 골모형을 구성하고, 서로 다른 길이(8.5 mm, 10.0 mm, 11.5 mm, 13.0 mm, 15.0 mm)의 직경 4.0 mm 나사형 임플란트를 식립한 모형을 제작하였다. 해석 절차의 간소화를 위하여 모든 물성은 등방성, 선형탄성, 균질성으로 가정하였다. 골-임플란트 계면은 접촉 요소법으로 처리하여 골유착이 일어나기 전 상태로 구성하였다. 지대주 장축에 120도의 각도로 지대주의 구개 절단각 중앙부에 176 N의 정하중을 가하고 응력분포를 관찰하였다. von Mises stress를 이용하여 응력을 분석한 결과 모든 모형에서 순측 피질골에 응력이 집중되었으며 피질골과 망상골의 경계부에서 최대 응력값을 나타내었다. 길이에 따른 비교시 8.5 mm 모형에서 가장 큰 최대 응력값을 나타냈으며, 임플란트 길이가 증가될수록 좀 더 양호한 응력 분포를 나타내었다. 상악 전치부 즉시 하중시에 피질골의 존재 유무는 매우 중요하며, 길이가 긴 임플란트를 식립하는 것이 유리하며, 가능하면 13.0 mm 이상의 임플란트를 식립하는 것이 즉시하중을 시행할 때 응력 분산에 유리한 것으로 판단된다.

Wrap을 사용하는 자가 도포 미백젤의 치아 미백 효과 (Efficacy of a self - applied paint - on whitening gel combined with wrap)

  • 김수연;안재현;김지영;김진우;박세희;조경모
    • 구강회복응용과학지
    • /
    • 제34권3호
    • /
    • pp.175-185
    • /
    • 2018
  • 목적: 미백젤의 효과 증대 및 치은 자극의 최소화를 위해 wrap을 사용하는 자가 도포 치아 미백제의 임상적 효능과 안전성을 평가하는 것이다. 연구 재료 및 방법: 90명의 피험자를 대조군과 2.8%, 3.0%의 과산화수소가 포함된 미백젤을 사용하는 두 개의 실험군으로 각각 30명씩 무작위 배정하였다. 그들은 상악 4전치 부위에 하루 1번 30분씩 2주간 미백젤과 wrap을 사용하였다. VITA shade guide와 ShadeEye $NCC^{(R)}$를 이용하여 치아 색조 측정을 하였고, 부작용은 인터뷰와 구내 검사로 조사하였다. 효능과 안전성 평가를 위해 통계 처리 하였다. 결과: 비타 색조 기준표에 의한 평가에서는 미백 성분이 들어있는 실험군에서 대조군과 비교시 유의한 미백 효과를 보였다. 측색기를 이용한 평가에서는 3.0% 실험군이 대조군과 2.8% 실험군에 비해 유의한 미백 효과를 보였다(P < 0.05). 경미한 부작용의 호소가 일부 있었으나 모든 군에서 치은 자극에 대한 이상증상을 보이지 않았다. 결론: Wrap을 사용한 자가 도포 미백젤은 과산화수소의 농도가 2.8%에서 3.0%로 높아질수록 그 효과가 증가되며 유의하게 심각한 부작용이 관찰되지 않아 유용한 자가 미백 치료제로 활용될 수 있다.

하악과두의 골증식체 평가에 있어서 transmaxillary 촬영법과 transcranial 촬영법의 비교 (COMPARISON OF TRANSMAXILLARY AND TRANSCRANIAL PROJECTION IN THE EVALUATION OF OSTEOPHYTES Of MANDIBULAR CONDYLES)

  • 김태균;김진수
    • 치과방사선
    • /
    • 제19권1호
    • /
    • pp.123-136
    • /
    • 1989
  • 5개의 건조두개골의 하악과두에 인위적으로 골증식체를 형성한 후 수직각 25°, 수평각 0°를 부여한 transcranial 촬영법과 두부규격 방사선 촬영기를 이용한 transmaxillary 촬영법을 시행하여 얻은 90매의 transcranial 및 45매의 transmaxillary방사선사진을 통해 다음과 같은 결론을 얻었다. 1. transcranial 촬영법에서 골증식체가 하악과두의 상중부에 있을 때 폐구시에 관찰이 용이하였으나 (p<0.05), 그 이외의 부위에서는 통계학적인 유의성이 없었다(p>0.05). 2. 골증식체가 하악과두의 내부 및 중부 (p<0.05)에 위치하였을 때는 transmaxillary 촬영법에서 관찰이 더 용이하였으며 외부에 위치하였을 때는 통계학적인 유의성이 없었다 (p>0.05). 3. 골증식체가 하악과두의 상방(p<0.05) 및 후방(p<0.01.)에 위치하였을 때는 trans maxillary 촬영법에서 관찰이 더 용이하였으며 전방에 위치하였을 때는 통계학적인 유의성이 없었다. (p>0.05). 4. Transcranial 촬영법에서는 골증식체가 하악과두의 측방으로 위치할수록(p<0.01), transmaxillary 촬영법에서는 후방으로 위치할수록(p<0.35) 관찰이 용이하였다.

  • PDF

하악골 전돌증을 동반한 안모비대칭의 유형 분석 (FACIAL ASYMMETRY WITH MANDIBULAR PROGNATHISM - A NEW TRIAL OF CLASSIFICATION AND INTERPRETATION -)

  • 윤규식;정영수;강군철;박형식
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제30권2호
    • /
    • pp.108-120
    • /
    • 2004
  • Object : Patients with facial asymmetry accompanying mandibular prognathism have various causes and clinical features. So, it is difficult to find a satisfactory treatment method functionally and esthetically. Every traditional classification and interpretation to find etiopathogenesis and/or to establish ideal surgical modality has many limitations because it can't be applied simply to various conditions of patients with facial asymmetry accompanying mandibular prognathism. Therefore, we employ a new classification to interpret more details of the morphologic change of mandible and the spatial change of mandible and maxilla. Materials and Methods : Using panoramic X-ray films, PA cephalograms and submentovertex films of 126 patients diagnosed with facial asymmetry accompanying mandibular prognathism as resources, the following results were gathered after analyzing each characteristics through distributing the patterns according to the morphological mandibular asymmetry and mandibular and maxillary spatial asymmetry. Results : Almost frequency of morphological mandibular asymmetry was shown. In case of condyle-ramus elongation and body elongation group, it's frequency was the highest. Higher frequency of compensating vertical growth was shown on the side of over growing maxilla in case of vertical length difference between left and right condyle-ramus. On the other hand, higher frequency of no compensating vertical growth difference between left and right side was shown in case of no vertical length difference in condyle-ramus. Spatial mandibular asymmetry generally occurred when there was no morphological mandibular asymmetry. Correlation between condyle length difference and condyle-ramus length difference between left and right side was very high, but correlation between condyle length difference and body length difference, and correlation between condyle length difference and body vertical length difference was low. Conclusion : In case of patients with facial asymmetry accompanying mandibular prognathism, it is suggested that various pattern of facial asymmetry is occurred by the independent growth of each unit rather than dependent growth of other unit by major growth unit abnormality. Due to the untypical pattern and the various asymmetry occurring according to the changes of each mandibular growth unit, it is considered that an appropriate surgical method should be searched based on the accurate recognition of the each pattern for patients with facial asymmetry accompanying mandibular prognathism.

상하악 악교정수술 후 입술 기울기변화 (CHANGE OF LIP CANTING AFTER BIMAXILLARY ORTHOGNATHIC SURGERY)

  • 이준휘;홍종락;김영호
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제33권6호
    • /
    • pp.643-647
    • /
    • 2007
  • Purpose: The purpose of study was to investigate the correlationship between lip canting change and occlusal canting change after bimaxillary orthognathic surgery, and the ratio of lip canting change and occlusal canting change after the surgery. Patients and methods: The subjects for this study was obtained from a group of 25 patients who took bimaxillary orthognathic surgery for occlusal canting correction at the Department of the Oral and Maxillofacial Surgery, Samsung Medical Center in Seoul, Korea between January 2000 and December 2005 and a patient's chart had to contain a resting frontal facial photograph in natural head position and a corresponding PA cephalogram in occlusion on the same day before the surgery and post-op 6 months later. The lip canting change was assessed with the angle each labial commissure and the bipupilary reference line. And, the occlusal caning change in the frontal plane was assessed with the angle between the each maxillary first molar occulasal surface and the bi-frontozygomatic suture reference line. Results: In angular measurement, average occlusal canting change was $3.09^{\circ}$ and standard deviation was $1.05^{\circ}$, average lip canting change was $1.56^{\circ}$ and standard deviation was $1.05^{\circ}$. In linear measurement, average occlusal canting change was 2.41mm and standard deviation was 2.75mm, average lip canting change was 1.18mm and standard deviation was 0.43mm. Lip canting correction ration to occlusal canting correction was 51.5(${\pm}8.4$)% in angular measurement and 48.8(${\pm}9.1$)% in linear measurement. Under Pearson's correlation analysis, Pearson's correlation coefficient was 0.869 in angular measurement and 0.887 in linear measurement(p-value < 0.01). High correlationship was shown between occlusal canting change and lip canting change. Conclusion: First, Bimaxillary orthognathic surgery can correct lip canting as well as occlusal canting. Second, The average amount of lip canting correction is $51.5{\pm}8.4%,\;48.8{\pm}9.1%$ of occlusal canting correction in the study.

교합관계 기록 재료의 정확성에 관한 임상적 비교 연구 (AN EXPERIMENTAL STUDY ON THE ACCURACY OF INTEROCCLUSAL RECORDING MATERIALS)

  • 박홍렬;장익태;김광남
    • 대한치과보철학회지
    • /
    • 제28권2호
    • /
    • pp.91-108
    • /
    • 1990
  • The purpose of this study was to compare the maganitude of the discrepancies of the mounting errors in according to the states of dentitions, and to the superoinferior, anteroposterior, and rightleft driecetions. GROUP I. : Fourteen patients 22 to 26 years of age with a full complement of teeth, were used in the study. The criteria fro patient selection were a complete dentition, sparse restorarive treatment, and adequate posterior and anterior occlusan stops. And they had no sign and sympton at TMG area. GROUPII. : Eigth patients 37 to 62 years of age with bilateral free ends. The criteria for patient selection were Kennedy classification class 1 cases, and adequate posterior and anterior stops. And the opposite dentitions were a full complement of teeth. Irreversible hydrocolloid impresiion of each arch was taken of each patient. These were immediatel poured in stone and mounted on a Denar Mark II. Articulator with the arbitrary slidematic face-bow. With hand articulation th e mandibular cast was mounted to the maxillary cast in centric occlusion. Five types of interocclusal records were taken of each patient : (1) aluwax (2) baseplate wax; (3) znic oxide-eugenol pasts; (4) polyether (Ramitec); (5) modeling compound. All measurement of the five selected recording materials were compared with those of the hand-articulated full arch models in centric occlusion or maximum interdigitation. The results were as follows; 1. There were statistical differences in amount of devitation in according to the materials and the states of dentition. The amount of deviation of compound was the largest. 2. There were statistical differences in amount of deviation in complete dentition at all directions. The amount of diviation of compound was the largest. And at the right-left direction the amount of znic oxide-eugenol paste was larger than that of baseplate wax. 3. There was a statistical difference in amount of diviations in partial edentulous dentition at the superoinferior direction. The amount of deviation of compound was larger than that of znic oxide-eugenol paste. 4. There was as statistical difference in amount of deviations in partial edentulous dentition at the right-left direction. The amount of deviation of baseplate wax was larger that tnat of polyether. 5. There was not a statistical difference in amount of diviation in partial edentulous dentition at the anteroposterior direction.

  • PDF

백서 치아 발거후 잔존 치주인대가 발치와의 치조골 재건에 미치는 영향 (THE EFFECT OF RESIDUAL PERIODONTAL LIGAMENT ON ALVEOLAR BONE REMODELING OF EXTRACTION SOCKETS IN RATS)

  • 조성훈;허익;박준봉;이만섭;권영혁
    • Journal of Periodontal and Implant Science
    • /
    • 제25권3호
    • /
    • pp.703-719
    • /
    • 1995
  • The purpose of this study was to observe the effects of the periodontal ligament on the healing and the formation of alveolar bone in the extraction socket, when this ligament had artificially remained in the socket during the tooth removal. Twenty rats aged 4 weeks were used and devided into the control groups (10) and the experimental groups (10) in this study. The maxillary right and left first molars were extracted in both groups. In the experimental groups the periodontal ligament was remained in the extraction sockets using 0.4% ${\beta}-aminopropionitrile$, and in the control the periodontal ligament was completely removed by curettage. At 1, 3, 5, 7 and 14 days after the tooth extraction, rats in both groups were serially sacrificed. And the specimens were prepared with Hematoxylin-Eosin stain for the light microscopic evaluation. The results of this study were as follows ; 1. On 1 day, the periodontal ligament was only found in the extraction socket walls of the experimental groups, and there was not the distinguishable difference between the control and the experimental groups. 2. On 3 days, there were more collagen fibers and the appearance of higher cellular density in the experimental groups than in the control. And the cells and collagen of the periodontal ligament were so actively proliferated and synthesized that invaded into the connective tissue of the extraction sockets in the experimental groups. 3. In the experimental groups, the trabecular bone was formed on the basal and lateral bone surface on 5 days. However, there was not the new bone forming appearance in the control groups at this time. 4. On 7 days, the trabecular bone was formed in the control groups. 5. On 14 days, the extraction sockets were almost entirely filled with the bony trabeculae in both groups. But, compared to the control group, the experimental groups showed the prominent differences in the amount & the density of the new bone formed. In conclusion, it was suggested that the residual periodontal ligament tissue in the extraction socket will play a major role as the important cell source in the healing and the new bone formation of the extraction socket.

  • PDF