• Journal of Life Science
• /
• v.16 no.6
• /
• pp.1006-1013
• /
• 2006

To High Throughput Screening (HTS), a homogeneous fluorescence polarization immunoassay (FPIA) was developed for the quantitative determination of ochratoxin A(OTA) using a $Victor^3$ (PerkinElmer). The homologous tracer, fluorescein-labelled OTA-EDF were synthesized and a specific OTA antibody has been used in the development of the method. It allowed the determination of OTA in the concentration range 0.5-200 ng/ml, with the detection limit of 0.3 ng/ml. The method developed was highly specific and reproducible. OTA spikes in unpolished rice extracts were determinable by FPIA with good recovery. For naturally contaminated unpolished rice samples some disagreement was observed between the results obtained by FPIA and HPLC, which could be related to the a little matrix effect observed for FPIA. Further research is needed to validate the procedure. On the basis of these initial results, this FPIA appears to meet the performance criteria for OTA screening of food samples without a complicated clean-up.

• Korean Chemical Engineering Research
• /
• v.50 no.1
• /
• pp.50-54
• /
• 2012

In this study, PANI and PANI/$TiO_2$ composites were prepared as electrode materials for a supercapacitor application. Cyclic voltammetry (CV) was performed to investigate the supercapacity properties of these electrodes in an electrolyte solution of 6 M KOH. The PANI/$TiO_2$ composites were polymerized by amount of various ratios through a simple in-situ method. The morphological properties of composites were analyzed by SEM and TEM method. The crystallinity of the composite and $TiO_2$ particle size were identified using X-ray diffraction (XRD). In the electrochemical test, The electrode containing 10 wt% $TiO_2$ content against aniline units showed the highest specific capacitance (626 $Fg^{-1}$) and delivered a capacitance of 286 $Fg^{-1}$ reversibly at a 100 $mVs^{-1}$ rate. According to the surface morphology, the increased capacitance was related to the fact that nano-sized $TiO_2$ particles (~6.5 nm) were uniformly connected for easy charge transfer and an enhanced surface area for capacitance reaction of $TiO_2$ itself.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.9
• /
• pp.56-65
• /
• 2005

A dynamic analysis method that freezes a time domain by discretization and solves the spatial propagation equation has a unique feature that provides a degree of freedom on spatial domain compared with the space discretization or space-time discretization finite element method. Using this feature, the time finite element analysis can be effectively applied to optimize the spatial characteristics of distributed type actuators. In this research, the time domain finite element method was used to discretize the model. A state variable vector was used in the discretization to include arbitrary initial conditions. A performance index was proposed on spatial domain to consider both potential and vibrational energy, so that the resulting shape of the distributed actuator was optimized for dynamic control of the structure. It is assumed that the structure satisfies the final rest condition using the realizable control scheme although the initial disturbance can affect the system response. Both equations on states and costates were derived based on the selected performance index and structural model. Ricatti matrix differential equations on state and costate variables were derived by the reconfiguration of the sub-matrices and application of time/space boundary conditions, and finally optimal actuator distribution was obtained. Numerical simulation results validated the proposed actuator shape optimization scheme.

• The Korean Journal of Zoology
• /
• v.32 no.4
• /
• pp.429-440
• /
• 1989

Spirometru erinocei의 유충인 sparganum에서 추출한 조항원 단백질을 항원으로 하여 sparganosis, cysticercosis, hydatidosis환자의 IgG 항체와 정상인의 IgG 항체를 혈청반응시켜 ELISA와 EITB에 의해 교차반응을 일으키는 비 특이항원 성분과 종특이항원 성분을 추구하였다. 1. sparganum에서 0.01 M PBS (PH 7.4)로 추출한 조항원 단백질을 SDS-PAGE로 전개하여 290 Kd에서 23 Kd범위의 분자량을 가진 25개의 단백질이 분획되었다. 2. sparganum의 조항원을 항원으로하여 ELISA로 sparganosis, cysticercosis, hydatidosis 환자의 190 항체와의 혈청 반응치는 sparganosis환자에게서는 0.44 $\pm$ 0.07에서 1.90 $\pm$ 0.03으로 negative control normal sera의 0.D (0.15 $\pm$ 0.03)를 기준으로 하였을 때 모두 양성이며 민감도(sensitivity)가 100 %이었으며 cysticercosis, hydatidosis환자혈청에서 양성반응이 나타났으며 교차반응도 있었다. 3. EITB에서는 spargancsis환자의 IgG항체에 의해 16개의 항원성분이 인지되었으며 이 중 6개의 항원성분이 정상인의 혈청에서도 인지되어 교차반응을 일으키는 항원성분이었으며 cysticercosis환자혈청에서 인지된 4개의 항원성분 중 2개의 항원성분이 sparganosis 환자혈청에서 인지된 것과 같았으며 hydatidosis환자의 190항체에 의해 인지된 19개의 항원성분 중 12개의 항원성분이 sparganosis환자혈청에서 인지된 항원 성분과 같았다. 4. 290 Kd, 200 Kd, 28 Kd의 항원성분은 sparganosis환자의 196항체에서만 인지되었고 228 Kd, 152 Kd, 66 Kd항원성분은 hydatidosis환자의 19G항체에서만 인지되었으며 66 Kd항원성분은 sparganosis, cysticercosis, hydatidosis, 정상인의 혈청에서 모두 인지되었다. We studied the serological reaction between the specific and nonspecific antigenic components from metacestode (plerocercoid) of spiromeko erimacei and IgG antibodies in sparganosis, cysticercosis. hydatidosis patients and normal human sera by ELISA and EITB. We prepared the crude extracts of sparganlim from snake, Matrix tigrina laterolis and used as antigenic components. By SDS-PAGE, we detected a total 25 peptide bands (fractions) with 290 Kd to 23 Kd molecular weight, and 8 bands of these detected bands developed strongly by silver stain. In serological test, ELISA, we recognized the cross-reaction of antigenic components reacting with IgG antibodies in heterogenous sera, cysticercosis and hydatidosis patients sera. The crude antigenic components of sparganum showed the high sensitivity in sparganosis, hydatidosis patients sera, but showed lower sensitivity in cysticercosis patients sera than the sparasanosis, hydatidosis patients sera. Sixteen antigenic components of these 25 separated bands were recognized by antibodies In sparsanosis patients sera,8 antigenic components in normal human sera, 4 antigenic components in cysticercosis patients sera and 19 antigenic compoenents in hydatidosis patients sera. The crude antigenic compnenets with 290 Kd, 200 Kd, 125 Kd and 28 Kd molecular weight was only recognized in sparganosis patients sera, but 64 Kd antigenic component was nonspecific antigenic components which were also cross-reacted with sparganosis, hydatidosis, cysticercosis patients sera and normal human sera.

• The Korean Journal of Applied Statistics
• /
• v.30 no.4
• /
• pp.603-613
• /
• 2017

Many people have recently posted about personal interests on social media. The development of the Internet and computer technology has enabled the storage of digital forms of documents that has resulted in an explosion of the amount of textual data generated; subsequently there is an increased demand for technology to create valuable information from a large number of documents. A text mining technique is often used since text-based data is mostly composed of unstructured forms that are not suitable for the application of statistical analysis or data mining techniques. This study analyzed the Meteorological Yearbook data of the Korea Meteorological Administration (KMA) with a text mining technique. First, a term dictionary was constructed through preprocessing and a term-document matrix was generated. This term dictionary was then used to calculate the annual frequency of term, and observe the change in relative frequency for frequently appearing words. We also used regression analysis to identify terms with increasing and decreasing trends. We analyzed the trends in the Meteorological Yearbook of the KMA and analyzed trends of weather related news, weather status, and status of work trends that the KMA focused on. This study is to provide useful information that can help analyze and improve the meteorological services and reflect meteorological policy.

• Journal of Korea Foundry Society
• /
• v.11 no.6
• /
• pp.475-481
• /
• 1991

In this study the fabrication technology and mechanical properties of AC8A/$Al_2O_3$ Composites by squeeze casting process were investigated to develope for application as the piston materials that require good friction, wear resistance, and thermal stability. AC8A/$Al_2O_3$ composistes without a porosity and the break of preform were fabricated at the melt temperature of $740^{\circ}C$, the preform temperature of $500^{\circ}C$, and mold temperature of $400^{\circ}C$ under the applied pressure of $1200kg/cm^2$ as the results of the observation of microstructures. As the results of this study, the tensile strength of AC8A/$Al_2O_3$ composites was not increased linearly with $Al_2O_3$ volume fraction and so it seemed not to agree with the rule of mixture, which had been used often in metal matrix composite. Also the tensile strength after thermal fatigue test was little different from that before the test. Consequently it was thought that AC8A/$Al_2O_3$ composites fabricated under our experimental conditions had a good thermal stability and subsequently a good interface bonding. Wear rate(i.e., volume loss per unit sliding distance) of AC8A/$Al_2O_3$ composites was decreased with $Al_2O_3$ volume fraction and the sliding speed at both room temperature and $250^{\circ}C$ and so there was a good correlation between wear rate and hardness. Also the wear rate of AC/8A20% $Al_2O_3$ composities was obtained the value of $1.65cm^3/cm$ at sliding speed of 1.14m/sec as compared with about $3.0\;{\times}10^{-8}cm^3/cm$ hyereutectie Al-Si alloy(Al-16%Si-2%Cu-1%Fe-1%Ni), which applied presently for piston materials. The wear behavior of $Al_2O_3$ composites was observed to a type of abrasive wear by the SEM view of wear surface.

• Journal of Ship and Ocean Technology
• /
• v.5 no.3
• /
• pp.1-13
• /
• 2001

Present-day rules and regulations for the design and construction of ships are almost without exemption of a prescriptive and deterministic nature. Often it is argued that this situation is far from ideal; it does no right to the advances, which have been made during the past decades in engineering tools in marine technology, both in methodology and in computational power. Within IMO this has been realized for some time and has resulted in proposals to use Formal Safety Assessment(FSA) as a tool to improve and to modernize the rule making process. The present paper makes use of elements of the FSA methodology, but instead of working towards generic regulations or requirements, a Risk Assessment Approach, not unlike a 'safety case'; valid for a certain ship or type of ship is worked out. Delft University of Technology investigated the application of safely assessment procedures in ship design, in co-operation with Anthony Veder Shipowners and safety experts from Safely Service Center BV. The ship considered is a semi-pressurized-fully refrigerated LPG carrier. On the basis of the assumption that a major accident occurs, various accident, scenarios were considered and assessed, which would impair the safety of the carrier. In a so-called Risk Matrix, in which accident frequencies versus the consequence of the scenarios are depicted, the calculated risks all appeared lo be in the ALARP('as low as reasonable practicable') region. A number of design alternatives were compared, both on safety merits and cost-effectiveness. The experience gained with this scenario-based approach will be used to establish a set of general requirements for safety assessment techniques in ship design. In the view that assessment results will be most probably presented in a quasi-quantified manner, the requirements are concerned with uniformity of both the safety assessment. These requirements make it possible that valid comparison between various assessment studies can be made. Safety assessment, founded on these requirements, provides a validated and helpful source of data during the coming years, and provides naval architects and engineers with tools experience and data for safety assessment procedures in ship design. However a lot of effort has to be spent in order to make the methods applicable in day-to-day practice.

• Journal of Periodontal and Implant Science
• /
• v.26 no.2
• /
• pp.429-447
• /
• 1996

Transforming growth factor $-{\beta}$ is one of the polypeptide growth factors that mediate the activity of mesenchymal cells and regulate wound healing process via cell proliferation, migration and extracellular matrix formation. The purposes of this study is to evaluate the effects of transforming growth factor $-{\beta}$ on the protein synthetic activity of human periodontal ligament cells and human gingival fibroblasts. The cells which were prepared were primary cultured gingival fibroblasts and periodontal ligament cells from humans, and the fourth or sixth subpassage were used in the experiments. Cells were seeded and at a confluent state, 0, 0.5, I, 2.5, 5, 10 ng/ml $TGF-{\beta}$ and $2{\mu]Ci/ml\;[^3H]$ proline were added to the cells and cultured for 24 hours. Then, 1 and 5 ng/ml concentrations were selected and added to confluent cells and cultured for 24 and 48 hours. They were labeled with $2{\mu}Ci/ml\;[^3H]$ proline for 24 hours and a collagen assay was done by the Peterkofsky and Diegelman method. The results were presented as the mean disintegration per minute (dpm) per well and S.D. of four determinations, The results were as follows. : The total protein, collagen and noncollagenous protein synthesis in periodontal ligament cells and gingival fibroblasts were increased dose- dependently by transforming growth factor-p to 2.5-5 ng/ml concentration and decreased at 10 ng/ml concentration. The percent of collagen was slightly changed according to the concentration of transforming growth factor-po The effect of transforming growth $factor-{\beta}$ was not specific for collagen synthesis since it increased the total, noncollagenous and collagenous protein, simultaneously. In the comparison of protein synthetic activity between the human periodontal ligament cells and human gingival fibroblasts, the human gingival fibroblasts had higher activities than the human periodontal ligament cells at all times and concentrations of $TGF-{\beta}$. In the comparison of protein synthetic activity between the 24 hour effect and the 48 hour effect of $TGF-{\beta}$, the 48 hour cultured cells' synthetic activity decreased more than the 24 hour cultured cells at human periodontal ligament cells and human gingival fibroblasts. In conclusion, $TGF-{\beta}$ has important roles in the stimulation of protein synthesis in human periodontal ligament cells and human gingival fibroblasts. Thus, it may be useful for clinical application in periodontal regenerative procedures.

• Korean Chemical Engineering Research
• /
• v.53 no.3
• /
• pp.282-288
• /
• 2015

A new energetic thermoplastic elastomer based on the azidated polybutadiene(Az-PBD)/ethylene vinyl acetate copolymer (EVA) blends was prepared, and structure and properties of the blends were invetigated by SEM, DSC, DMA, tensile testing and combustion test. The Az-PBD was synthesized via a two-step process involving the addition reaction of commercially available 1,2-PBD with $Br_2$ and subsequent nucleophilic substitution reaction of the brominated PBD with $NaN_3$. EVA/Az-PBD with 90/10, 80/20, 70/30 (wt/wt) was prepared by a solution blending. SEM, DSC, and DMA results revealed that the blends are partially compatible and Az-PBD is dispersed in continuous EVA matrix. Tensile test showed that modulus and tension set increased while elongation-at-break of the blends decreased with increasing Az-PBD content in the blends, but all the blends showed a elongation at break as high as 700% and a tension set of less than 5%, indicating that the blends are typically elastomeric. Combustion test showed that, with increasing Az-PBD content in the blend, higher energy can be released.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.3
• /
• pp.64-77
• /
• 2015

An effective method for produce munitions effectiveness data is to calculate weapon effectiveness indices in the US military's Joint Munitions Effectiveness Manuals (JMEM) and take advantage of the damage evaluation model (GFSM) and weapon Effectiveness Evaluation Model (Matrix Evaluator). However, a study about the Range Safety that can be applied in the live firing exercises is very insufficient in the case of ROK military. The Range Safety program is an element of the US Army Safety Program, and is the program responsible for developing policies and guidance to ensure the safe operation of live-fire ranges. The methodology of Weapon Danger Zone (WDZ) program is based on a combination of weapon modeling/simulation data and actual impact data. Also, each WDZ incorporates a probability distribution function which provides the information necessary to perform a quantitative risk assessment to evaluate the relative risk of an identified profile. A study of method to establish for K-Range Safety data is to develop manuals (pamphlet) will be a standard to ensure the effective and safe fire training at the ROK military education and training and environmental conditions. For example, WDZs are generated with the WDZ tool as part of the RMTK (Range Managers Tool Kit) package. The WDZ tool is a Geographic Information System-based application that is available to operational planners and range safety manager of Army and Marine Corps in both desktop and web-based versions. K-Range Safety Program based on US data is reflected in the Korean terrain by operating environments and training doctrine etc, and the range safety data are made. Thus, verification process on modified variables data is required. K-Range Safety rather than being produced by a single program, is an package safety activities and measures through weapon danger zone tool, SRP (The Sustainable Range Program), manuals, doctrine, terrain, climate, military defence M&S, weapon system development/operational test evaluation and analysis to continuously improving range safety zone. Distribution of this K-range safety pamphlet is available to Army users in electronic media only and is intended for the standing army and army reserve. Also publication and distribution to authorized users for marine corps commands are indicated in the table of allowances for publications. Therefore, this study proposes an efficient K-Range Safety Manual producing to calculate the danger zones that can be applied to the ROK military's live fire training by introducing of US Army weapons danger zone program and Range Safety Manual