• Journal of Biosystems Engineering
• /
• v.20 no.1
• /
• pp.22-35
• /
• 1995

Pepper is the most important horticultural plant in Korean farm. Pepper harvesting has been known to be the most difficult process in pepper cultivation so that demand for mechanization is strong. In a research to develop a pepper harvesting machine performance and capacity of the harvester should be determined based on both economical feasibility and machine design concept. In order to accomplish an economical analysis of the pepper harvester, a mathematical model for comparing manual harvesting cost to machine harvest cost was developed. Validity of the model depends on the data used in the model. Economical information for the model variables was acquired from the result of farm survey on pepper cultivation technique and economics of pepper farmer. Technical information on pepper harvester were also collected through literature review and analyzed. Based on the economical analysis and synthesis of the technical information on pepper harvesters, its performance and capacity were determined. The operating performances of the harvester such as cutting, conveying, flipping, pepper removing and post-processing (sorting) were determined. Daisy capacity of the machine was determined to be 0.41 ha. A pepper harvester with the suggested capacity was economically feasible if the price of pepper harvester, pepper recovery ratio and service life of harvester were about 6 million won, 80%, and 4 years, respectively.

• Food Science and Preservation
• /
• v.24 no.6
• /
• pp.778-785
• /
• 2017

This study was conducted to develop a predictive model for the growth of Escherichia coli strain RC-4-D isolated from red kohlrabi sprout seeds. We collected E. coli kinetic growth data during red kohlrabi seed sprouting under isothermal conditions (10, 15, 20, 25, and $30^{\circ}C$). Baranyi model was used as a primary order model for growth data. The maximum growth rate (${\mu}max$) and lag-phase duration (LPD) for each temperature (except for $10^{\circ}C$ LPD) were determined. Three kinds of secondary models (suboptimal Ratkowsky square-root, Huang model, and Arrhenius-type model) were compared to elucidate the influence of temperature on E. coli growth rate. The model performance measures for three secondary models showed that the suboptimal Huang square-root model was more suitable in the accuracy (1.223) and the suboptimal Ratkowsky square-root model was less in the bias (0.999), respectively. Among three secondary order model used in this study, the suboptimal Ratkowsky square-root model showed best fit for the secondary model for describing the effect of temperature. This model can be utilized to predict E. coli behavior in red kohlrabi sprout production and to conduct microbial risk assessments.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.8-11
• /
• 2002

In this study, Automatic design program creates 3D solid models and constructs them. The method of making assembly model is two. One assembles the element made in automatic design program with hand, the other develops the automatic design program for creating assembly model. Automatic design program improves the convenience of user. In creating gears, involute ewe and Trochoidal fillet curve are made by mathematical development.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.635-640
• /
• 2001

In this study, a mathematical model is established for prediction of chloride penetration in unsaturated cracked early-age concrete. The model is combined with models for thermo-hygro dynamic coupling of cement hydration, moisture transport and micro-structure development. Chloride permeability and water permeability at cracked early-age concrete specimens are evaluated using a rapid chloride permeability test and a low-pressure water permeability test, respectively. Then, a homogenization technique is introduced into the model to determine equivalent diffusion coefficient and equivalent Permeation coefficient. Increased chloride transport due to cracks at the specimen could be predicted fairly well by characterizing the cracks using proposed model. Proposed model is verified by comparing diffusion analysis results with test results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.2
• /
• pp.407-411
• /
• 2009

This study presents the analysis of the identifications and determinations of the material parameters in the developed model in the former paper and their effects on the stress paths. It was shown that the influences of the parameters, specially involved in the strain rate and the viscous nucleus, were in generally acceptable range. From this point, the model was modified by identifying the plastic yield surface and the viscous yield surface in the same mathematical form. The modified model was successful in simulating stress path.

• Transactions of Materials Processing
• /
• v.10 no.2
• /
• pp.130-136
• /
• 2001

The mathematical set-up model was developed to reduce the mechanical property deviation in annealed and slightly rolled steel strip. The mechanical peculiarities of skin pass rolling process, such as high friction value and non-circular contact arc, low reduction and non-negligible entry and exit elastic zones as well as central restricted deformation zone are all taken into account. The deformation of work rolls is calculated with the influence function method and arbitrary contact arc shape is permitted. The strip deformation is modeled by slab method and the entry and exit elastic deformation zones are included. The strip restricted deformation zone near the neutral point is also considered. It was revealed that the new model has better accuracy than present regression model by statistical analysis with actual mill rolling data.

• Journal of Navigation and Port Research
• /
• v.28 no.4
• /
• pp.311-315
• /
• 2004

This paper is aimed to develop a mathematical model for making the forecast information of typhoon's movement such as the estimated movement direction and positions after 24 and 48 hours. The proposed model calculates such kind of information of a typhoon by similar past typhoon's track data which are selected with three similarity criteria among the database of typhoons' tracks for past fifty years. We carried out a simulation forecast with No.14 typhoon formed in 1997, and found that the results of the proposed model were reasonable and it would be suitable for a simulation system for training mariners so that they can take suitable actions to evade the typhoons.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.317-317
• /
• 2000

The mathematical set-up model was developed to reduce the mechanical property deviation in annealed and slightly rolled steel strip. The mechanical peculiarities of temper rolling process, such as high friction value and non-circular contact arc, Low reduction and non-negligible entry and exit elastic zones as well as central restricted deformation zone are all taken into account. The deformation of work rolls is calculated with the influence function method and arbitrary contact arc shape is permitted. The strip deformation is modeled by slab method and the entry and exit elastic deformation zones are included. The restricted deformation Bone near the neutral point is also considered. It was revealed that the new model has better accuracy than present regression model by statistical analysis with actual mill rolling data.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.3
• /
• pp.139-150
• /
• 2000

Although a number of neck injuries are generated, the data which quantify the kinematic response of the human head and cervical spine in low-speed rear-end automobile collisions is very limited. On this problem, just few in vitro experimental research or some experimental research using dummy on neck injury by rear-end collision was conducted, thus systematic research is requested on full scale injury mechanism. An occupant model for the response of the occupant subject to rear-end collision using commercial dynamics package DADS was developed. Developed model shows more close agreement with the experimental data compared with the MADYMO simulation results for the cases of ${\delta}V=16$ kph in sled test. For the case of ${\delta}V=8$ kph and 33.5 kph with production seat, model also shows its reliable response compared with experimental results using Hybrid III and Hybird III with RID.

• Industrial Engineering and Management Systems
• /
• v.2 no.1
• /
• pp.35-44
• /
• 2003

Recovery of end-of-life (EOL) products is an environmentally and economically sound way to achieve many of the goals of sustainable development. Many product recovery systems are dependent upon destructive disassembly such as shredding, which undesirably causes a large volume of shredder dust and makes parts reuse impossible. Although non-destructive disassembly has been considered as an alternative for solving the problems, the classification of disassembled items has not been sufficiently investigated. In this paper, we propose a model that mathematically optimizes the disassembly and classification of EOL products. Based on the AND/OR graph that illustrates all possible disassembly sequences of a given product, we identify the physical properties that are considered as constraints in the model. As a result of the solution procedure, the recovery problem can be transformed into a mixed integer linear programming (MILP) model. We show an example that illustrates the concept of our model.