• Journal of the Chungcheong Mathematical Society
• /
• v.26 no.2
• /
• pp.315-321
• /
• 2013

Let $D_0$, $D_1{\subset}\bar{R}^n$ be non-empty sets and let ${\Gamma}$ be the family of all closed curves which join $D_0$ to $D_1$. In this note, we introduce the concept of the mathematical conductance $C({\Gamma})$ of a curve family ${\Gamma}$ and examine some basic properties of mathematical conductance. And we obtain the inequalities in connection with capacity of condensers.

• Journal of the Chungcheong Mathematical Society
• /
• v.18 no.2
• /
• pp.205-213
• /
• 2005

We introduce the conductance and examine its properties. We study the local behavior of quasiconformal mappings on the boundary of a domain $D{\subset}\overline{R}^n$ n and present some geometric applications of conductance.

• Journal of the Korean Vacuum Society
• /
• v.1 no.1
• /
• pp.16-23
• /
• 1992

Conductance calculation is essential in designing a vacuum system. Since mathematical solution is nearly impossible except for a few simple cases, it has been so usual to calculate the conductance for a series connection of components using an approximate formula by Oatley. However, Oatley's formula has a fundamental flaw of totally neglecting the effect of gas beaming. In this study, a new technique is suggested for calculating the conductance with the same accuracy as the Monte Carlo method but with much less computing time, and applied to a system of tube connections in series. The effects of gas beaming in the calculation of conductance is analyzed quantitatively by comparing the conductance calculated by this method with those from Oatley's formula.

• Korean Journal of Mathematics
• /
• v.12 no.1
• /
• pp.33-40
• /
• 2004

Let $E,F{\subset}(R^*)^n$ be non-empty sets and let ${\Gamma}$ be this family of all closed curves which join E to F in $(R^*)^n$. In this paper, we shall study the problems of finding properties for the conductance $C({\Gamma})$. And we obtain the inequalities in connection with capacity of condensers.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.2
• /
• pp.354-358
• /
• 2013

This paper discusses the analysis of arc conductance in a gas circuit breaker (GCB) during current interruption process and the investigation method of the interruption capability. There are some limitations in the application of the computational fluid dynamics (CFD) for the implementation of an arc model around the current zero, despite the fact that it gives good results for the high-current phase arc. In this study, we improved the accuracy in the analysis of the interruption performance by attempting the method using CFD and a mathematical arc model. The arc conductance at 200 ns before current zero (G-200ns) is selected as the indicator to predict the current interruption of the Short Line Fault (SLF). Finally, the proposed method is verified by applying to the actual circuit breakers which have different interruption performances.

• Korean Journal of Materials Research
• /
• v.3 no.2
• /
• pp.185-192
• /
• 1993

Abstract Electrorheological effect on the dispersive system of polarizable fine powder/dielectric oil has been investigated. ER effect was explained divided into following 3 mechanisms; (1) surface conductance, (2) bulk conductance, and (3) induced polarization. Mathematical model which predicts the interactive force between two fine particles in the electrorheological fluid has been introduced based on the induced polarization mechanism. This model may provide guide to select materials for strong ER effect. The attractive force between two particles was calculated using the above model for the selected 7 materials such as ceramics, ferrites, polymers etc. From the calculation result, it was found that the ceramics and ferrites are good materials which show a strong ER effect.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1389-1399
• /
• 2015

This research suggests maximum power point tracking (MPPT) for the solar photovoltaic (PV) power scheme using a new constant voltage (CV) fractional order incremental conductance (FOINC) algorithm. The PV panel has low transformation efficiency and power output of PV panel depends on the change in weather conditions. Possible extracting power can be raised to a battery load utilizing a MPPT algorithm. Among all the MPPT strategies, the incremental conductance (INC) algorithm is mostly employed due to easy implementation, less fluctuations and faster tracking, which is not only has the merits of INC, fractional order can deliver a dynamic mathematical modelling to define non-linear physiognomies. CV-FOINC variation as dynamic variable is exploited to regulate the PV power toward the peak operating point. For a lesser scale photovoltaic conversion scheme, the suggested technique is validated by simulation with dissimilar operating conditions. Contributions are made in numerous aspects of the entire system, including new control algorithm design, system simulation, converter design, programming into simulation environment and experimental setup. The results confirm that the small tracking period and practicality in tracking of photovoltaic array.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.1
• /
• pp.18-23
• /
• 1991

Recently SLAMECKA suggested the mathematical dynamic arc model of the SF6 gas circuit breaker [1]. The author applied the above dynamic arc model to the E.H.V. transmission line and investigated the interrupting capability of the SF6 gas circuit breaker. In particular the Runge-Kutta-England numerical method suitable for the use in systems that involve nonlinear dynamic arc and traveling wave was used by converting the current source into the voltage source in the DOMMEL's method [2]. The successful computer resultls were obtained and it was found that the arc time constant and the second derivative of the arc conductance are closely related to the interrupting capability of the SF6 gas circuit breaker.

• The Korean Journal of Physiology and Pharmacology
• /
• v.12 no.5
• /
• pp.267-274
• /
• 2008

Since first discovered in chick skeletal muscles, stretch-activated channels (SACs) have been proposed as a probable mechano-transducer of the mechanical stimulus at the cellular level. Channel properties have been studied in both the single-channel and the whole-cell level. There is growing evidence to indicate that major stretch-induced changes in electrical activity are mediated by activation of these channels. We aimed to investigate the mechanism of stretch-induced automaticity by exploiting a recent mathematical model of rat atrial myocytes which had been established to reproduce cellular activities such as the action potential, $Ca^{2+}$ transients, and contractile force. The incorporation of SACs into the mathematical model, based on experimental results, successfully reproduced the repetitive firing of spontaneous action potentials by stretch. The induced automaticity was composed of two phases. The early phase was driven by increased background conductance of voltage-gated $Na^+$ channel, whereas the later phase was driven by the reverse-mode operation of $Na^+/Ca^{2+}$ exchange current secondary to the accumulation of $Na^+$ and $Ca^{2+}$ through SACs. These results of simulation successfully demonstrate how the SACs can induce automaticity in a single atrial myocyte which may act as a focus to initiate and maintain atrial fibrillation in concert with other arrhythmogenic changes in the heart.

• International journal of advanced smart convergence
• /
• v.11 no.4
• /
• pp.88-95
• /
• 2022

Vacuum simulation is associated with the prediction and calculation of how materials, pumps and systems will perform using mathematical equations. In this investigation, three different high vacuum systems were simulated and estimated with each vacuum characteristics by VacTran simulator. In each of modelled vacuum systems, selection of gas loads into vessel, combination of rough and high vacuum pumps and dimension of conductance elements were proposed as system variables. In pump station model, the pumping speed to pressures by the combination of root pump was analyzed under the variations of vessel volume. In this study, the effects of outgassing dependent on vessel materials was also simulated and aluminum vessel was estimated to optimum materials. It was obtained from the modelling with diffusion pump that the diameter, length of 50×250[mm]roughing line was characterized as optimum variables to reach the ultimate pressure of 10E-7[torr]. Optimum design factors for vacuum characteristics of modelled vacuum system were achieved by VacTran simulator. Feasibility of VacTran as vacuum simulator was verified and applications of VacTran in high tech process expected to be increased.