• Korean journal of food and cookery science
• /
• v.21 no.3 s.87
• /
• pp.339-345
• /
• 2005

This study was carried out to determine the changes of chlorophyll contents in spinach during growth stages and storage with two packaging materials. The chlorophyll contents increased to a maximum level in the spinach leaves after 35 days of planting, while the level in the roots extremely decreased and that in the stems did not change during the growth period. The total chlorophyll content was higher in the leaves than that in the stems and roots. The ratios of chlorophyll a/b in the leaves and stems were almost similar to those reported for spinach elsewhere. When stored for 1, 3, and 5 days without packaging, the remaining percentage of chlorophyll was $96.29\%,\;90.79\%\;and\;85.74\%$, respectively, at $5^{\circ}C,\;and\;82.75,\;44.63,\;33.07\%$, respectively, at $20^{\circ}C$. The chlorophyll contents of the spinach stored in polyethylene bags were significantly higher than of that those without packaging and of that packaged with newspaper during storage. From the results, it was found that spinach packaged in polyethylene bags suppressed the degradation of chlorophyll and maintained the freshness during low temperature storage and that the chlorophyll contents increased during the growth period.

• Korean journal of food and cookery science
• /
• v.25 no.6
• /
• pp.690-702
• /
• 2009

Liparis tessellatus(cubed snailfish), Hemitripterus villosus(shaggy sea raven), Ligularia fischeri, and Cirsiu setidens, which are staple products in Samcheok, were studied as food resources for the development of a representative local menu. Thus, their nutritional compositions were analyzed, and the resulting values were used to assess the nutritional characteristics of the newly-developed menu. In Liparis tessellatus and Hemitripterus villosus, the organic components including protein and fat tended to be lower than the corresponding values referred to as the 'Seventh Revision Food Composition Table' (2006), which was presumably linked to the spawning period of the fish. The contents of Zn, Cu, and Mg, which are nutritionally important even though the consumption of these minerals by Koreans is not sufficient, were determined to 0.5, 0.2, and 34.3 mg/100 g for Ligularia fischeri, and 26.2, 1.1, and 147.7 mg/100 g for dried Cirsiu setidens. Cirsiu setidens cultivated in Samcheok contained noticeably higher amounts of calcium, zinc, and iron, and its calcium level was more than an order of magnitude higher than that provided by the Food Composition Table. This might be associated with the fact of that Samcheok is abundant in lime which consists of calcium-containing inorganic materials. n-3 fatty acids including docosahexaenoic acid(DHA) accounted for 21% and 13% of the total fatty acids, for Liparis tessellatus and Hemitripterus villosus, respectively, and the major amino acids were glutamic acid, aspartic acid, glycine, and alanine for both fish. One of the newly developed menus, Cirsiu setidens hae-jang-gook, was nutritionally superior to the corresponding menu that used dried radish leaves, a typical ingredient in hae-jang-gook, in terms of the protein, iron, and zinc contents. Rice pottage cooked with Liparis tessellatus instead of abalone was high in protein, calcium, iron and zinc, where one serving provided 29.1, 15.4, 31.0, and 27.8% of their Reference Intake (RI)s, respectively.

• Korean Journal of Food Science and Technology
• /
• v.37 no.6
• /
• pp.873-881
• /
• 2005

This study was conducted to improve the properties of frozen dough foods (buns and noodles etc.) on the quality deterioration with microwave oven cooking. Microwave is a useful cooking method, but it quickly takes moisture from food surface and makes lowering food quality abruptly. For improvement of these problems, mixing doughs with addition of various additives of 34 types manufactured respectively; starches, modified starches, gums and emulsifiers etc. Each mixing dough produced in sheet type $(30{\times}30{\times}1mm)$ and steamed them, was quickly froze at $-70^{\circ}C$ and packed with polyethylene. Packed samples kept at $-20^{\circ}C$ for 48 hours. After they were steam or microwave treatment packed or non-packed with polyethylene, studied for improvement effects of quality as sensory evaluation and selected 6 type additives; modified starches (TA, ST), gums (AR, GA) and emulsifiers (E, S1) as improvement agent. Because moisture loss from microwave oven cooking leads to quality deterioration of frozen dough foods, additive, such as including starches, modified starch, gums, and emusifiers were added to improve dough properties. Amylogram, scanning electron microscopy, textural analysis, and differential scanning calorimetry revealed addition of additives improved textural properties including surface-hardening of frozen dough foods compared to the control.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.3
• /
• pp.329-336
• /
• 2006

Iron manufacturing process involves production of various by-product including slag, sludge, sintering and EAF(Electric Arc furnace dust). Some of the by-products such as EAF and sintering dust are disposed of as waste due to their high heavy metal contents. It has been notice for many years that the EAF dust also contain about 65% of Fe(0) and Fe(II) and then the possible utilization of the iron. One possibility is to apply the EAF as a lining material in conjunction with clay or HDPE liners, in waste landfill. The probable reaction between the leachate containing toxic elements such as TCE, PCE dioxine and $Cr^{6+}$ is reduction of the toxic materials in corresponding to the oxidation of the reduced iron and therefore diminishing the toxicity of the leachate. It is, however, prerequisite to evaluate the leaching characteristics of the EAF dust before application. Amelioration of the leachate would be archived only when the level of toxic elements in the treated leachate is less than that of in the untreated leachate. Several leaching techniques were selected to cover different conditions and variable environments including time, pH and contact method. The testing methods include availability test, pH-stat test and continuous column test. Cr and Zn are potentially leachable elements among the trace metals. The pH of the EAF dust is highly alkaline, recording around 12 and Zn is unlikely to be leached under the condition. On the contrary Cr is more leachable under alkaline environment. However, the released Cr should be reduced to $Cr^{3+}$ and then removed as $Cr(OH)_3$. Removal of the Cr is observed in the column test and further study on the specific reaction of Cr and EAF dust is underway.

• Journal of Plant Biotechnology
• /
• v.33 no.3
• /
• pp.153-160
• /
• 2006

Brassica rape is an important species used as a vegetable, oil, and fodder worldwide. It is related phylogenically to Arabidopsis thaliana, which has already been fully sequenced as a model plant. The 'Multinational Brassica Genome Project (MBGP)'was launched by the international Brassica community with the aim of sequencing the whole genome of B. rapa in 2003 on account of its value and the fact that it has the smallest genome among the diploid Brassica. The genome study was carried out not only to know the structure of genome but also to understand the function and the evolution of the genes comprehensively. There are two mapping populations, over 1,000 molecular markers and a genetic map, 2 BAC libraries, physical map, a 22 cDHA libraries as suitable genomic materials for examining the genome of B. rapa ssp. pekinensis Chinese cabbage. As the first step for whole genome analysis, 220,000 BAC-end sequences of the KBrH and KBrB BAC library are achieved by cooperation of six countries. The results of BAC-end sequence analysis will provide a clue in understanding the structure of the genome of Brassica rapa by analyzing the gene sequence, annotation and abundant repetitive DHA. The second stage involves sequencing of the genetically mapped seed BACs and identifying the overlapping BACs for complete genome sequencing. Currently, the second stage is comprises of process genetic anchoring using communal populations and maps to identify more than 1,000 seed BACs based on a BAC-to-BAC strategy. For the initial sequencing, 629 seed BACs corresponding to the minimum tiling path onto Arabidopsis genome were selected and fully sequenced. These BACs are now anchoring to the genetic map using the development of SSR markers. This information will be useful for identifying near BAC clones with the seed BAC on a genome map. From the BAC sequences, it is revealed that the Brassica rapa genome has extensive triplication of the DNA segment coupled with variable gene losses and rearrangements within the segments. This article introduces the current status and prospective of Korea Brassica Genome Project and the bioinformatics tools possessed in each national team. In the near future, data of the genome will contribute to improving Brassicas for their economic use as well as in understanding the evolutional process.

• Journal of Korean Society of Forest Science
• /
• v.43 no.1
• /
• pp.31-34
• /
• 1979

In this study, enzymatic hydrolysis of the substrate of the waste wood of Cortinellus edodes was investigated using crude cellulase preparation of Trichoderma viride Pers. ex. Fr. SANK 16374. The crude cellulase was produced by the submerged culture process and produced in the culture fluid was salted out quantitatively by the use of ammonium sulfate. Reducing sugar was determined by the dinitrosalisylic acid (DNS) method. 1. The chemical composition of the waste wood was crude protein 2.26%, c. fat 2.57%, c. fibre 44.60%, c. ash 5.58% and lignin 13.62%. In amino acid composition, no cystine and methionine was showed, but trace amount of Vitamin A, $B_1$, and $B_2$, niacine and chloride were detected. (Table 1) 2. As heat treatment of the substrate was found to produce the highest reducing sugar yield being reacted for 48hr. with T.v cellulase, the substrate was heated to $190{\pm}5^{\circ}C$. for 45 min. either before or immediately after milling. 3. The substrate heated and ball milled at $190{\pm}5^{\circ}C$. for 45 min. the reducing sugar yield reached to 11.5%. 4. The substrate without any treatment was found to produce the highest reducing sugar yield being reacted 72hr. with T. v cellulase, the reducing sugar yield reached to 10.1%. 5. The rate of reducing sugar per each treated substrate was decreased by the order of the substrated, heated and then ball milled at $190{\pm}5^{\circ}C$. for 45 min. (11.5%)> without any treatment (10.1)> ball milled and heated at $190{\pm}5^{\circ}C$. for 45 min. (6.9%). 6. Saccharification of waste wood has been shown to be possible by heat treated and milling the substrate in contact with cellulase. And it is likely to be recommended that the waste wood may be valuable for raw materials of saccharification.

• Journal of Korean Society of Forest Science
• /
• v.23 no.1
• /
• pp.29-33
• /
• 1974

U-Reuk, a laureate musician in the days of King Jin-Heung, Silla Dynasty, built the Eui Rim Reservoir about 1,400 years ago. This was one of the oldest man-made reservoir. The embankment of the reservoir collapsed by the clumsy artificial drainage on August 19, 1972 when the heavy rainfall of 462 mm/day caused a dangerous overflow of the reservoir. The result of the study on the mystic ancient embankment techniques are as follows: 1. Sandy loam derived from the weathering of granite which is the most widely distributed rock type in the area, was used in the embankment. Large size logs (embankment core) of 30-50 cm in diameter were buried lengthwise along the embankment. 2. The six stocks of Pinus densiflora, 3 stocks of Quercus acutissima, 1 stock of Quercus variabilis and 1 stock of Popolus maximowiczii, altogether 11 stocks are identified. Forest types in the nearby area during the days of the reservoir construction seem to be includde a considerable number of Pinus densiflora, Quercus and Populus species. 3. The angle of repose of the earth materials is taken into account during the embankment. On top of the embankment double layers of clay (20-30 cm indepth) were spread and consolidated. Layer of litter of 20-40 cm in deep covered on the clay layer of the embankment completely, and another layer of clay was consolidated over the litter. Finally, a layer of stones of 10-30 cm in diameter and clay (yellow soil layer) toped the embankment. 4. At the lower part of the embankment clay layer was thicker and became thinner as it goes upwards. At every layer, soil was consolidated and burned. When embankment was completed, it was covered evenly with heavy clay, and finally it was topped with general soil. 5. The heavy clay layer on the inner slope of the embankment showed gray phenomena and litter remained raw humus layer. The clay layer functioned as rubber in the water, and raw humus layer prevented water from seepages. Thus, the embankment was solidly built in this way. 6. The ancient embankment techniques used soils conveyed from nearby area taking the angle of repose into account. Once embankment was completed, clay and litter layers were added to have a plasticity and to withstand the water pressure. 7. It is an excellent technique that the reservoir was constructed with least labor for maximum effects while the recent embankment techniques requires a large amount of labor.

• Journal of Korean Society of Forest Science
• /
• v.90 no.5
• /
• pp.608-618
• /
• 2001

To understand the weathering processes of the soil by submicroscopic method is very important to realize the properties of the soils. In this study soil formation processes show every steps to the changes in chemical and mechanical properties and the submicroscopic characteristics of soil weathering on the profiles of forest soils derived from granite in southern part of Korea. Fecal pellets(SEM) are given a full detail of the positive activities of the forest soil animals; mainly invertebrates in the O horizon and the E horizon. External shapes of fecal pellets have been divided into five groups : spherical, ellipsoidal, cylindrical, platy and threadlike. But doughnutlike form of fecal pellets is observed in this study. The soluble and suspended materials in the soils move downwards by percolation from the A horizon to the B or the BC horizons, and result in the illuviation cutans(SEM) on the ped surface of the lower horizon and deposited stack of kaolinite. Illuviated cutans are deposited on the ped surface even in the depth of 312cm in the BC horizon as well as the Bt horizon and comprise of fine silt, coarse clay and fine clay. A lot of halloysites are observed on the cutan surface. Halloysite formation from feldspars has been well known but a lot of hallyosite formation are observed in this study. The formation were predicted by Jackson(1962), inferred by Wada and Kakuto(1983a, b) and proved evidently by Cho and Mermut(1992a, b). This also suggests that halloysites in the soils derived from granite are formed a lot from ferruginous chlorites. The release of Fe from the chlorite structure are significant pedogenic processes and newly formed Fe oxides imparted a red color to the soils. The iron oxides particles, which are ejected and recrystalized, aggregate thickly on the edge of the ferruginous chlorites, and this indicates the release of structural Fe from weathered chlorites. Hematites and goethites are frequent in the fine clay in this soils.

• Journal of Korean Society of Forest Science
• /
• v.85 no.2
• /
• pp.329-339
• /
• 1996

This study is to investigate the effect of mycorrhizal development, growth, nutrient absorption of P. thunbergii seedlings inoculated with Pisolithus tinctorius(Pt. KJ-1) in relation to toxic materials in soil. The concentrations on copper solution applied to the soils were 0, 40, 120, 260, 430ppm. The results are summarized as follows : 1. The germination of P. thunbergii with Pt. increased greater than without ectomycorrhizal fungi. Mycorrhizal development showed a significant decreasing trend at high concentration, and tolerant Cu test with Pt. in agar plate media showed a decreasing trend at a high level. 2. P. thunbergii seedlings inoculated with Pt. showed that the shoot length was significantly promoted at 40, 120ppm copper levels, and that of noninoculated seedlings had the lowest effect in 430ppm copper level. 3. The outer shape of ectomycorrhizal root tips after inoculating Pt. on P. thunbergii seedlings appeared as a monopodial type, a fern-like type, and a cluster-like type at 0ppm, 40ppm levels, but only monopodial type came out at 260ppm, 430ppm copper levels. 4. Root length, no. of juvenile leaves, total length of juvenile leaves, total dry weight, no. of needles and total length of needles of P. thunbergii with Pt. increased greater than those of noninoculated seedling. Growth response of P. thunbergii seedling inoculated with Pt. increased significantly at 40ppm, 120ppm Cu levels. 5. As a result of analysis of growth medium, pH, Na, CEC increased at higher Cu level, and total nitrogen, organic matters, available phosphorous, K, Ca and Mg decreased at 40ppm, 120ppm Cu levels. As a result of an analysis about a copper within soils, it appeared having high Cu-concentration at 0ppm level of an inoculated Pt. and high Cu-concentration in noninoculated Pt. than in inoculated Pt. at higher level. 6. As a result of an analysis of shoot, N, P, and K-concentration were higher in noninoculated seedlings than in inoculated seedlings, and Cu-concentration was higher in inoculated seedlings than in noninoculated seedlings. The analysis of root resulted in a high N-concentration at 40ppm, 120ppm levels, in a high P-concentration in inoculated seedlings and in a high Cu-concentration in noninoculated seedlings. Cu-concentration was significantly higher at root than at shoot.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.2
• /
• pp.261-266
• /
• 2009

All of the subjects of the investigation (n=141) were schools that have food services under direct management. The number of students who get food services at the schools were $1,001{\sim}1,500$ students with 46.8% investigation. In school food services, fried foods were highly preferred and the biggest merits of fried foods were (in order of highest importance) 'improvement of food services satisfaction'> 'source of calories supply'> 'easiness of cooking process'. Service frequency of fried food were in the order of 'twice a week'> 'three times a week'> 'once a week', and for the factors to decide service frequency of fried food, 'preference leaning on fried food', and 'excessive fat intake' were the most considered. The most considered factors in the case of choosing fried food were 'preference' and 'calories and nutritional value'. For the cautious steps during the frying process, 'keeping after frying' was picked the most, and the reasons were 'lack of containers to keep in appropriate temperature and quality' and 'time consuming'. For preference and service frequency of ingredients in fried foods, 'chicken' and 'pork' were very high. As the result, it was analyzed that preference by ingredients matched service in school lunches by using a ranking test. Total cooking and processing time of fried foods required in school lunches were approximately $237{\pm}99$ minutes ${\sim}291{\pm}141$ minutes which showed total required time was about same no matter what ingredients were used. As the result of comparing and analyzing the processes, vegetables took less thawing and frying time, but the processing time for vegetables was more complicated since handling time before frying was longer compared to meat. In the important management process by the main groups of fried foods, the frying process was the most cautious cooking process in the category of meat or fish and shellfish used as ingredients. In addition, if vegetables were used as ingredients, storing it after frying was the process that needed the most care.