• Applied Biological Chemistry
• /
• v.13 no.3
• /
• pp.207-218
• /
• 1970

Studies were carried out to develope the most economical and practical methods of packaging and preservation of kimchi, so commercialization of kimchi manufacture could proceed rapidly. The results obtained may be summarized as following. (1) It is generally established that the acceptable range of lactic acid content of kimchi is between 0.4% and 0.75%. Based on sensory evaluation, kimchi having lactic acid content below 0.4% and above 0.75% was not edible, and the time of optimum taste corresponded to the vicinity of 0.5% of lactic acid content. For the refrigeration storage with or without preservatives, the packaging kimchi in plastic film must be done at the lactic acid content of 0.45%, for lactic acid fermentation will continue slowly after the packaging. However, for the heat sterilized kimchi the packaging should be done at the 0.5% of lactic acid content for the best because lactic acid fermentation is completely stopped after the packaging. (2) Polyethylene, polypropylene, and polycello were chosen as suitable packaging materials. Polyethylene is cheapest among them but kimchi packaged in this film was damaged frequently in handling process and gave off kimchi flavor. On the other hand polypropylene also gave off kimchi flavor, but its higher mechanical strength gave better protection to kimchi and it had superior display effect due to the transparancy. Therefore polypropylene made much better packaging material. Polycello proved to be the best packaging material from the standpoint of physical characteristics but its price is higher than that of other plastic films. To be effective, the thickness of plastic films for packaging kimchi must exceed 0.08mm. (3) Keeping property of kimchi appeared to be excellent by means of freezing. However, by the time the frozen kimchi was thawed out at room temperature, moisture loss due to drip was extensive, rendering the kimchi too stringy. (4) Preservation of kimchi at refrigerated temperatures proved to be the best method and under the refrigerated condition the kimchi remained fresh as long as 3 months. The best results were obtained when kimchi was held at $0^{\circ}C$. (5) In general, preservatives alone were not too elective in preserving kimchi. Among them potassium sorbate appeared to be most effective with the four fold extension of self-life at $20^{\circ}C$ and two fold extension at $30^{\circ}C$. (6) In heat sterilization the thickness of packaged kimchi product had a geat effect upon the rate of heat penetration. When the thickness ranged from 1.5 to 1.8cm, the kimchi in such package could be sterilized at $65^{\circ}C$ for 20 minutes. Kimchi so heat treated could be kept at room temperature as long as one month without apparent changes in quality. (7) Among combination methods, preservation at refrigerated and heat sterilization could be favorably combined. When kimchi was stored at $4^{\circ}C$ after being sterilized at $65^{\circ}C$ for 20 minutes, it was possible to preserve the kimchi for more than 4 months.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.575-585
• /
• 2013

This research was performed to evaluate the recycling feasibility as a construction material of dredged harbor soil mixed with clay and glass frit. Concentration of heavy metals of the dredged soil from D harbor was severly high, showing Zn of 526.0~13,150.1 mg/kg. The dredged soil was maily composed of 48.30 wt% $SiO_2$, 16.60 wt% $Al_2O_3$, 10.10 wt% CaO, 7.75 wt% $Fe_2O_3$. The clay and the glass frit contained 70.82 wt% $SiO_2$ and $Al_2O_3$ 18.78 wt%, and 71.75 wt% $SiO_2$, 13.99 wt% CaO, 8.51 wt% $Na_2O$, respectively. After adding 10~40 wt% to the clay and sintering them at $1,000^{\circ}C$ or $1,100^{\circ}C$, the compressive strength of the sintered specimens showed $132.6{\sim}178.5kgf/cm^2$ or $581.2{\sim}793.7kgf/cm^2$, respectively. In case of SC46 with the addition 40 wt% of the dredged soil to the clay, the compressive strength ($793.7kgf/cm^2$) of specimen sintered at $1,100^{\circ}C$ was over 5 times higher than that at $1,000^{\circ}C$. The specimen mixed with 40 wt% of dredged soil, 60 wt% of clay and 1 wt% of glass frit satisfied the 1st grade standard for clay brick by KS L 4201. The results of all specimens by Korean Standard Leaching Test also satisfied the standard criteria.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.38 no.4
• /
• pp.277-287
• /
• 2012

To develop new therapeutic materials to prevent hair loss and enhance hair growth, we developed a medicinal herbal complex extract (MHCE) using 23 herbs traditionally used in oriental medicine. Medicinal Herbal complex extract was consist of Angelica gigas Nakai, Psoralea corylifolia Linne, Biota orientalis Endlicher, and Eclipta prostrata Linne, Rehmannia glutinosa Liboschitz var. purpurea Makino, Ligustrum lucidum Aiton, Polygonum multiflorum Thunberg, and Sesamum indicum Linne, Sophora angustifolia Sieboldet Zuccarini, Angelica dahurica Benthamet Hooker, and Leonurus sibiricus Linne, Salvia miltiorrhiza Bunge, Prunus persica Batsch, Commiphora molmol Engler, Chrysanthemum indicum Linne, Boswellia carterii Birdwood, Panax ginseng C. A. Meyer, Cnidium officinale Makino, Albizia julibrissin Durazzini, and Corydalis ternata Nakai that have traditionally been used for treating hair loss, preventing gray hair, anti-inflammation, and blood circulation in oriental medicine. In addition, we examined the hair growth effect of MHCE in vitro and in vivo. In vitro, we evaluated the effects of MHCE on cultured HFDPC, HaCaT cells, and murine embryonal fibroblasts (NIH3T3 cells). Also, we evaluated the ability of MHCE to prevent gray hair on murine melanoma cells (B16F1 cells). The hair growth-promoting effect of MHCE in vitro was also observed in vivo using C57BL/6 mice. Our results showed that MHCE significantly increased the proliferation of HFDPC (175 % proliferation at $50{\mu}g/mL$), HaCaT cells (133 % proliferation at $20{\mu}g/mL$), and NIH3T3 cells (120 % proliferation at $50{\mu}g/mL$). MHCE also showed consistent melanogenesis in B16F1 cells (154 % melanin synthesis at $50{\mu}g/mL$). Moreover, MHCE showed potential for hair growth stimulation in C57BL/6 mice experiments (98 % hair growth area on 4 weeks). These results indicate that MHCE may be a good candidate for promotion of hair growth.

• Journal of radiological science and technology
• /
• v.32 no.1
• /
• pp.87-93
• /
• 2009

Background/aim : Atherosclerotic disease at the origin of the vertebral arteries is one of the risk factors for vertebrobasilar ischemic disease. Assessment and visualization of the origin of the vertebral arteries with color doppler sonography is a non-trivial task. The aim of this study is to increase the visualization rate of the origin of the vertebral arteries with color doppler sonography. Materials and Methods : Color doppler sonography for the vertebral arteries included carotid arteries was performed to 198 patients. We first examined the vertebral artery in the upper neck in the direction of the subclavian artery to distinguish its origin more easily. If the vertebral artery origin was not visualized in natural position, the examiner pushed the transducer toward a clavicle or pushed the shoulder of patient by the other hand. The technical methods for visualization of the vertebral artery origin were classified into three grades: natural position, pushing the transducer, and pushing the shoulder of patient according to the depth (3.0 cm and shallower, deeper than 3.0 cm) of the origin. Results : The origin of the vertebral arteries could be visualized in 97% on the right and in 92% on the left. The origin of the vertebral arteries could be visualized in 98.6%, 1.4%, and 0.0% in natural position, pushing the transducer, and pushing the shoulder of patient, respectively, at shallower than 3.0 cm on the right side. The origin of the vertebral arteries could be visualized in 81.2%, 14.6%, and 4.2% in natural position, pushing the transducer, and pushing the shoulder of patient, respectively, at deeper than 3.0 cm on the right side. The origin of the vertebral arteries could be visualized in 85.4%, 10.7%, and 3.9% in natural position, pushing the transducer, and pushing the shoulder of patient, respectively, at shallower than 3.0 cm on the left side. The origin of the vertebral arteries could be visualized in 55.7%, 30.4%, and 13.9% in natural position, pushing the transducer, and pushing the shoulder of patient, respectively, at deeper than 3.0 cm on the left side. Conclusion : If the examiner pushes the transducer toward a clavicle or pushes the shoulder of patient by the other hand, when the vertebral artery origin during the color doppler sonography is not visualized in natural position, visualization rate of the origin of the both vertebral arteries is increased.

• Korean Journal of Weed Science
• /
• v.12 no.1
• /
• pp.8-15
• /
• 1992

Arrowhead (Sagittaria trifolia L.), a perennial weed dominant in paddy field, is considerably difficult to control by herbicides. The investigation on the effects of environmental factors on emergence of arrowhead tuber can aid for controlling this weed. The results exmined were as follows : From the results of emergence characteristics at different levels of temperature, arrowhead tuber could germinated at 15$^{\circ}C$-40$^{\circ}C$. The optimal temperature for basal emergence was ranged from 25 to 30$^{\circ}C$. Basal emergence at 15$^{\circ}C$ and 20$^{\circ}C$ began at 56 and 12 days after tuber plantation, respectively and were later than those at the optimal temperature. At the different levels of shading, all the tested tubers could emerged. The days required for basal emergence at 25% and 50% shading plots were shorter than those at 70%, 80% and non-shading plots. The basal emergence was more effective under blue and clear films than any other phyto-selective materials. Some of arrowhead tubers could not emerged under green, red and yellow films. On the soil pH, the basal emergence was best at soil pH 6.0 and 7.0. At soil pH 4.0, 5.0 and 8.0, the required days for emergence were longer than those at soil pH 6.0 and 7.0 and some of tubers could not emerged. Arrowhead tubers more then 0.5 g showed the shorter shooting days than those less than 0.5 g. Tubers were able to emerge at water depth ranging from 0 to 20 cm. At 3 cm and 5 cm water depth, the required days for basal shooting were shorter than those at any other levels of water depth. The emergence of basals was best at molding depth of 0 cm, and the rates at 3 to 5 cm of plantation depth were decreased. At 10 cm plantation depth, the shooting rate was significantly decreased.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.4
• /
• pp.426-433
• /
• 1988

A pot experiment was conducted to find out the effects of application of slacked lime and fused super-phosphate on the lead uptake of upland crops in a lead added soil. Lead concentration of the soils were adjusted to 0, 150, 300mg/kg respectively. The slacked lime was applied at the equivalent amount of lime requirement with extra 150kg/10a, and 2 times for the fused superphosphate. The results obtained were as follows: 1. Lead contents in crops increased in the order: sesame > maize > potato > sweet potato > soybean > green perilla > peanut > red bean. 2. Lead contents in parts of crops were increased in the order; root > stem > leaf > grain. 3. Increasing lead concentration in soils, lead content in the plant was increased and crops yield were decreased. 4. Lead contents in soybean and green perlilla were decreased in slacked lime application treatment. 5. The lead contents in leaf and grain of soybean and green perllila decreased with decreasing in the ratio of Pb/Ca+Mg equivalent in soil. 6. Grain yield were increased in slacked lime, but were decreased in fused superphosphate application treatment. 7. With increasing the soil Pb contents, calcium and phosphate contents were increased in leaf and stem, but calcium was decreased in roots. 8. $1N-NH_4$ OAC soluble Pb contents in soil were 26-50 ppm and 42-70 ppm, respectively, for 150mg/kg and 300mg/kg lead treatments. 9. The soil pH was increased in the order of slacked lime, fused superphosphate and nontreatment.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.5
• /
• pp.264-271
• /
• 2002

Nitrogen releasing characteristics of polymer-coated urea(PCU) that made acrylic synthetic resins were studied in incubated soil, water and paddy soil. Also, their correlations and degradation patterns of coating material were tested. Releasing rate of nitrogen from PCU decreased with increasing coating rate. N001(coating rate 8.5%) and N003(coasting rater 6.3%) were low releasing amount at the early stage, whereas N005(coating rate 4.8%) was released over 80% within 20 days. Relationship of the releasing rate between incubated soil($25^{\circ}C$) and paddy soil could be described as follows : $Y=-0.0011X^2+2.2931X-50.264(R^2=0.9884)$ for N001, $Y=-0.0016X^2+1.1587X+5.5064(R^2=0.9805)$ for N003 and $Y=-0.03X^2+6.499X-243.22(R^2=0.9422)$ for N005, respectively (Y: release rate at field condition, X: experiment period). Relationship of the releasing rate between incubated water($30^{\circ}C$) and paddy soil can be described as follows : $Y=0.0011X^2+2.2601X-25.329(R^2=0.9884)$ for N001, $Y=-0.0306X^2+4.4994X-76.307(R^2=0.955)$ for N003 and $Y=-0.0164X^2+3.7764X-108.22(R^2=0.9422)$ for N005. After 150 days, coating materials of N001, N003, and N005 in incubated soil were degraded approximately 23%, 22% and 15%, respectively. Also The scanning electron microscope examination of coating material revealed that particle surface became gradually shattered with the time after the soil treatment.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.3
• /
• pp.255-263
• /
• 1996

This study was conducted to evaluate the application effects of three different granular fused magnesium phosphate products on soybean in a volcanic ash upland soil(Namweon series) of Cheju island. They were two domestic products(Kyunggi Chemical Industrial Co., LTD, Pungnong Biryo Industrial Co., LTD) and an imported Chinese product that were manufactured from different added materials. A powder fused magnesium phosphate. a single superphosphate(water soluble phosphatic fertilizer) and a fused superphosphate(mixed water soluble phosphate and 2% citric acid soluble phosphate) were presented as check fertilizers. Yield of soybean was the highest in the Pungnong product of granular fused magnesium phosphate. the next was the Chinese product imported and the Kyunggi product was the lowest but there was no statistical significance among the three granular products of fused magnesium phosphate. There was no clear tendency between yield and yield components of soybean plant however, the effects on the number of mainstem nodes, number of branches nodes and number of pods per plant were observed in the increased yield treaments. Phosphate concentration in stems and pods of soybean plant at harvesting stage was higher than those in stems of soybean plant during growing period. Uptake amounts and recovery rates of phosphate in stems and pods of soybean plant at harvesting stage were similar with the yield increasing tendency on soybean. In the changes of soil pH at different periods, the application of phosphatic fertilizers was increased soil pH. Soil pH in Chinese product was higher than domestic products, but it was similar to single superphosphate. The available silicate concentrations of soil were higher in the plot of Pungnong product than Chinese product.

• Journal of Sericultural and Entomological Science
• /
• v.22 no.2
• /
• pp.1-7
• /
• 1981

Diallel crosses among six silkworm varieties were used as the materials by the randomized block design. and combining ability tests were conducted to determine the relationships between parents and their F$_1$ hybrids. The six parents and their 30 F$_1$ crosses were evaluated for five quantitative characters in each female and male silkworms. Mean values of period(days) of larval stage in mid-parent were more than those of each F$_1$ hybrids. Highly significant differences were shown in the total cocoon weight and weight of cocoon layer of silkworms in F$_1$ hybrids of 111$\times$114, 111$\times$ yunil, 114$\times$yunil and those of reciprocal crosses. From the results, it was recognized that varieties A(111), D(114) and F(yunil) were useful varieties as the parents in breeding of silkworms for increasing the total cocoon weight and weight of cocoon layer, etc. Differences among crosses in apparent degree of heterosis existed for total cocoon weight of cocoon layer and cocoon layer ratio, etc. Mean square values of GCA (general combining ability) were more greater than those of SCA(specific combining ability) for period(days) of larval stage, period (days) of 5th instar and cocoon layer ratio of silkworms. The effects of GCA were differ from parents and characters and the effects of SCA were also differ from parents, characters and crosses.

• Korean Journal of Soil Science and Fertilizer
• /
• v.26 no.1
• /
• pp.1-9
• /
• 1993

A study was carried out to investigate the genesis and mineralogical characteristics of clay minerals in three different types of soil derived from the gray shale distributed in Kyeongbuk Province in Korea. The soils have been developed from parent materials of residuum (Daegu series, Sirye series), colluvium(Banho series), and alluvium (Bigog series) of the same origin of parent rock with a topographical sequence. The investigation mainly focussed on the mineralogical aspects of primary minerals of asnd and silt fractions, identification and quantification of clay minerals, and characterization of hydroxy-interlayered mineral (HIM) along with their chemical composition. The identification was done through analyses of chemical, X-ray diffraction, and thermal methods. The major clay minerals in the soils are illite, vermiculite, kaolin and HIM, while chlorite and mixed layer minerals such as illite/chlorite and illite/vermiculite were coexisted as a subsidiary minerals. The distribution of clay minerals, however, varies according to the location and types of parent material. In the soils derived from the parent material of residuum, the upper soil (Daegu series) shows higher of 2:1 type minerals such as illite, vermiculite, and HIM than 1:1 type mineral rich in the lower soil(Sirye series). Soils developed from the parent material of colluvium and alluvium were high in illlte and mixed layer minerals, but low in HIM compared with the residual soils. The predominant weathering sequence of the clay minerals in each soil could be inferred as follows according to the minerlogical distribution and quantification of clay minerals : Daegu series, illite ${\rightarrow}$ vermiculite ${\rightarrow}$ HIM ; Sirye series, vermiculite ${\rightarrow}$ kaolin minerals ; Banho sereies and Bigog series, illite ${\rightarrow}$ illlte/vermiculite and/or illite/chlorlte mixed layer ${\rightarrow}$ vermiculite.