• Journal of The Korean Society of Clinical Toxicology
• /
• v.12 no.2
• /
• pp.77-84
• /
• 2014

Purpose: Carbamate insecticides are potent cholinesterase inhibitors capable of causing severe cholinergic toxicity. Use of carbamate rather than organophosphate insecticides has been increasing. Compared with organophosphate poisoning, relatively few studies have investigated carbamate-associated acute pancreatitis. We investigated general characteristics and pancreatitis of carbamate poisoning and the predictors, among those readily assessed in the emergency department. Methods: We performed a retrospective review of consecutive patients, aged over 18 years, who were admitted between January 2008 and April 2012 to an emergency department (ED) of an academic tertiary care center for treatment of carbamate poisoning. Patients who exhibited poisoning by any other material, except alcohol, were excluded. After application of exclusion criteria, patients were divided according to carbamate-induced pancreatitis and non-pancreatitis groups. Results: A total of 41 patients were included in this study. Among these 41 patients, the prevalence of acute pancreatitis was 36.6% (15 patients). Initial blood chemistry tests showed a statistically higher glucose level in the pancreatitis group, compared with the non-pancreatitis group (222, IQR 189-284 vs. 137, IQR 122-175 mg/dL, P<0.05). Regarding clinical courses and outcomes, a significantly higher proportion of patients developed pneumonia [10 (66.7%) vs. 6 (23.1%), P<0.05] and had a longer hospital stay (7 days, IQR 6-12 vs. 5 days, IQR 2-11, P<0.05), but no difference in mortality, in the pancreatitis group vs. the non-pancreatitis group. In multivariate analysis, the initial glucose was showing significant association with the presentation of carbamate-induced acute pancreatitis (odds ratio 1.018, 95% confidence interval 1.001-1.035, P<0.05). Conclusion: Carbamate-induced acute pancreatitis is common, but not fatal. Initial serum glucose level is associated with acute pancreatitis.

• Food Science and Preservation
• /
• v.18 no.6
• /
• pp.973-979
• /
• 2011

The grape cultivar Campbell Early has high levels of malic acid as well as tartaric acid. The high concentration of total acid in the Campbell Early wine is a critical aspect of the wine's sensory characteristics. To prevent the deterioration of the wine's quality, which is caused by the strong sour taste derived from the raw material in wine making, the deacidification factor was investigated via carbonic maceration under different temperature conditions, especially in the presence or absence of malolactic bacteria. Based on the results of the presence test of the malolactic bacteria during carbonic-maceration treatment, Lactobacillus brevis, Lactobacillus plantarum, and Streptococcus thermophilus were characterized morphologically and were identified via biochemical tests and 16S-rRNA-gene-sequencing analysis. The isolated strains were found not to consume malic acid and to produce lactic acid. Moreover, these strains were consumed as soluble solids. The isolated strains are popularly known as lactic-acid bacteria and should have produced lactic acid from glucose. The Oenococcus oeni of the malolactic bacteria was not isolated. These results showed that the isolated strains are not deacidified during carbonic-maceration treatment.

• Journal of the Korean Society of Radiology
• /
• v.15 no.7
• /
• pp.999-1005
• /
• 2021

The object of this research is CS, which increases resolution while shortening inspection time, is applied to MRA to compare the quality of images for SENSE and CS techniques and to evaluate SNR and CNR to find out the optimal techniques and to provide them as clinical basic data based on this information. Data were analyzed on 32 patients who performed TOF MRA tests at a university hospital in Chung cheong-do (15 males, 17 females), ICA stenosis:10, M1 Aneurysm:10, and average age 53 ± 4.15). In the inspection, the inspection equipment was Ingenia CX 3.0T, Archieva 3.0T, and 32 channel head coil and 3D gradient echo as a method for equipment data. SNR and CNR of each image were measured by quantitative analysis, and the quality of the image was evaluated by dividing the observer's observation into 5 grades for qualitative evaluation. Imaging evaluation is described as being significant when the p-value is 0.05 or less when the paired T-test and Wilcoxon test are performed. Quantitative analysis of SNR and CNR in TOF MRA images Compared to the SENSE method, the CS method is a method measurement method (p <0.05). As an observer's evaluation, the sharpness of blood vessels: CS (4.45 ± 0.41), overall image quality: CS (4.77 ± 0.18), background suppression of images: CS (4.57 ± 0.18) all resulted in high CS technique (p = 0.000). In conclusion, the Compressed SENSE TOF MRA technique shows superior results when comparing and evaluating the SENSE and Compressed SENSE techniques in increased flow rate magnetic resonance angiography. The results are thought to be the clinical basis material in the 3D TOF MRA examination for brain disease.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.3
• /
• pp.1-10
• /
• 2021

The purpose of this study is to present the possibility a utilization of the tertiary mudstone in Pohang as road subsoil material through pilot experiments on the road embankment structure. This mudstone is an unconsolidated rock that is distributed in the soft rock sedimentary layer, the tertiary layer of the Cenozoic, and causes physical problems such as slaking, swelling, and reduced shear strength and chemical problem like acid drainage. In order to solve various complex problems, an laboratory mixing test was conducted, and the optimal mixing conditions of the tertiary mudstone (90%), composite slag (steel making 70%, blast furnace 30%), and neutralization and coating agent treatment were derived. In order to prove its utilization, a real-scale road embankment structure was constructed and tests were conducted for each section. The pre-processing section is stable due to the design of optimal mixing conditions, while in post-processing section, natural weathering proceeded rapidly, and structural problems were concerned. Since the effect of neutralizing and coating agents was confirmed in temporary-staking section, the neutralizing and coating agents can be applied during the temporary storage period.

• Food Engineering Progress
• /
• v.14 no.4
• /
• pp.359-366
• /
• 2010

Large-scale preparation steps of antithrombotic materials from wood ear mushroom (Auricularia auricular-judae) were established as follows. Grounded dry wood ear mushroom was extracted with 75% ethanol and its precipitate was extracted with $76^{\circ}C$ water for 2 hr followed by filter pressing. The filtrate was then concentrated by vacuum and extracted with 80% ethanol, and the resulting precipitate was then freeze-dried. The formula of the product was determined using consumer susceptibility tests as follows; mushroom extract 90.5%, high fructose corn syrup 2.0%, $\beta$-cyclodextrin 1.5%, fructo-oligosaccharide 2.0%, pear puree 4.0%. When the packed products were stored at 25, 37, or $45^{\circ}C$ for 8 weeks, there were no noticeable changes in water activity, moisture content, pH, and acidity. The viable cell number of total bacteria was slightly increased during the storage period at 25 and $37^{\circ}C$, The total bacteria were not detected in the product when stored at $45^{\circ}C$. When the product was injected intravenously into rat at the level of 1,000 mg/kg, antithrombotic activities such as activated partial thromboplastin time, thrombin time, prothrombin time, and FIB were increased when compared with the control group. When the product was administrated orally into rat at the level of 500 mg/kg, it showed the same antiplatelet activity to aspirin.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.8-14
• /
• 2019

Bird-strike is one of the most important design factors for safety in the aviation industry. Bird-strikes have been the cause of significant damage to aircraft and rotorcraft structures and the loss of life. This study used DYTRAN software to simulate the transient response of an Euler-Lagrangian composite helicopter blade that has been impacted by a bird. The Arbitrary Lagrangian Eulerian (ALE) method and a suitable equation of state were applied to model the bird. ALE was applied to the bird-strike analysis due to the large difference between the properties of the blade and bird. The debris of the bird was assumed to be a fluid and applied as Euler elements after the collision. Through the analysis of bird impacts, the leading-edge of the rotor blade (50.8 mm) was used to identify a positive margin of 1.18 based on the TSAI-FILL criteria. The results are assessed to be sufficiently reliable and may be evaluated to replace tests with various analysis conditions. The structural stability of the rotor blade could be assessed by applying various load conditions and different modeling methods in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.642-648
• /
• 2019

This paper presents a fast back-type transfer device for snack food processing that uses the inertia of transferred material. A conventional conveying system is a drive system that uses a belt conveyor and mechanical crank, which generate noise and vibration and cause environmental pollution. Vibration and noise are reduced in the proposed fast back feeding device by using a counterweight. The crank drive unit was replaced with a linear servomotor, and an equilibrium device was designed to balance the force due to acceleration. This makes it is possible to adjust the forward and backward speed and acceleration through PLC control. A vibration damper device offsets the vibration force of the periodic shock form. The main cause of the vibration was identified through vibration analysis, and reduction measures were established. We verified the effectiveness of the vibration by making a prototype and performing about 10 vibration tests. Because no mechanical transducer is needed, energy loss, noise, and vibration do not occur, and the operating speed is not limited.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.133-138
• /
• 2019

This study evaluated the tensile properties of SAPH440, a hot-rolled steel for automotive structural applications, based on GMAW lap welding, the welding current, the welding voltage, and the feed rate. Tensile tests were performed according to the joint parameters of the GMAW process, for which specimens were fabricated according to KS B ISO 9018 by lap welding. The bead appearance was observed in each condition, and the weldability was evaluated by the tensile test. Higher the welding current resulted in a deeper weld, but the tensile strength was not significantly different from when the parameter was fixed due to the fracture of the base material. When the current was higher than the voltage, as in the case of a welding current of 200 A and welding voltage of 17 V, a large amount of spatter is generated, the welding is unstable, and the welded part breaks. Higher the voltage resulted in the bead not causing defects in general, and it also affected the weldability. If the current and voltage were too low, the welding was not performed normally, and the tensile strength could not be measured. However, as the current increased, the increase of the voltage and the feed rate did not affect the tensile strength.

• The Journal of Korean Institute of Information Technology
• /
• v.16 no.11
• /
• pp.51-59
• /
• 2018

The Multi-Mission Unmanned Surface Vehicle(MMUSV), which is manufactured using glass Fiber Reinforced Plastic(FRP) material, is designed to perform a surveillance and reconnaissance on the sea. Various navigation sensors, such as RADAR, RIDAR, camera, are mounted on a mast to perform an autonomous navigation. And a dummy gun is mounted on the deck of the MMUSV for a target tracking and disposal. It is necessary to analyze a strength for structures mounted on the deck because the MMUSV performs missions under a severe sea state. In this paper, a strength analysis of the mast structure is performed on static loads and lateral external loads to verify an adequacy of the designed mast through a series of simulations. Based on the results of captive model tests, a strength analysis for a heave motion of the mast structure is conducted using a simulation tool. Also a simulation and fatigue test for a mounting part between the MMUSV and the dummy gun are performed using a specimen. The simulation and test results are represented that a structure of the mast and mounting part of the dummy gun are appropriately designed.he impact amount are performed through simulation and experiments.

• Journal of vocational education research
• /
• v.29 no.3
• /
• pp.209-230
• /
• 2010

In this study, the career barriers exploration counseling program was carried out to research the factor on the career barriers of women's college students. And then the effect of the career barriers exploration counseling program on career preparation behavior of the women's students was analyzed. The program that referred to the career counseling program proposed in domestic and career material suggested in Korean Women's Development Institute and Korea Research Institute for Vocational Education & Training was adopted in this investigation. Moreover referred to the previous research and reference related to career counseling that had conducted the related factor on career barriers and career preparation behavior. First of all, the program was reconstructed by referring to the Gottfredson(1981)'s career development theory. In order to verify the effect of the program on career preparation behavior of women's college students, two times tests were carried out on 10 persons of the experimental group and the control group respectively, before and after the program was performed. And then the ANCOVA was done on the difference between the post-test results of the experimental group and the control group. Findings of this study might be summarized as follows: First, the post-test result in the experimental group on career barriers was significantly lower than in the control group. Second, on career preparation behavior the result in the experimental group was higher than in the control group. Therefore, the career barriers exploration counseling program had a significant influence on career barriers of women's college students and the program impacted on career preparation behavior of women's college students significantly.