0.4wt% C을 함유하는 기존의 기계구조용 탄소강에 V과 Nb을 단독 또는 복합으로 첨가한 열간단조용 비조질강의 기계적 성질을 조사하고, 미세조직과 셔출물의 분포 및 형상을 관찰하였으며 첨가원소의 영향을 정량화 하기 위해 중회귀분석을 행하였다. 인장시험 결과 모든 재료의 인장강도는 $70kg/\textrm{mm}^2$ 이상으로 기존의 소입.소려재(S45C)와 동등하거나 그 이상이었으며, 충격시험 결과 대부분 재료의 충격에너지는 40J 이하로 기존 재료의 약 50%정도였 다. V함량이 0.10에서 0.l5wt%로 증가하였을 경우 인장강도는 약 20% 증가하였으나 충격에너지는 감소하였다. 이는 VC의 미세석출에 의해 석출강화 효과와 함께 펄라이트의 부피분율이 증가하고 층간거리가 감소했기 때문이다. 반면 Nb 함량이 0.05에서 0.10wt%로 증가한 경우에는 강도와 인성의 근소한 증가경향을 나타내었다. 이는 NbC의 석출애 의한 결정립 미세화 효과가 VC 보다 우세했기 때문이다. 또한 V+Nb의 복합첨가는 단독첨가시에 비하여 충격인성의 향상에 보다 효과적이었으며, 본 실험에서 최적 강도와 인성의 조합을 보인 합금조성은 0.4C-1.19Mn-0.05S-0.12V-0.07Nb로 인장강도는 $84kg/\textrm{mm}^2$ 이상, 충격인성은 34J 이상이었다.
Objectives: The purpose of this study is to evaluate the optimum conditions for oral mucosal irritation testing using the buccal pouch of hamsters. Methods: Test materials were applied to the buccal pouch of seven-week old male Syrian hamsters (SLC, Japan) four times at one-hour intervals and macroscopic changes were examined at 24 hours after final treatment. After sacrifice, the buccal pouches were removed and prepared for histopathological evaluation. In order to set the exposure time, we performed exposure tests of 5, 12, 18 and 23 minutes using sodium lauryl sulfate (SLS) 1% and set the treatment volume from the test results at 2, 3, or 4 ml treatment using SLS 1%, Triton X-100 1% and ethanol. After setting the experimental conditions, seven groups of materials [sodium lauryl sulfate (SLS) (1%), Triton X-100 (1%), hydrogen peroxide (3%), ethanol (100%), chlorhexidine (0.2%, 2%), phosphate buffer saline (PBS)] were assessed. Results: Experimental conditions of material exposure time were fixed as 18 minutes from the exposure tests of 5, 12, 18 or 23 min using sodium lauryl sulfate (SLS) 1%. Treated volume was set as 4 ml per each pouch from the test results of 2, 3, or 4 ml treatments using SLS 1%, Triton X-100 1% and ethanol. The results in terms of irritation degree were in the order of sodium lauryl sulfate (SLS) (1%) > Triton X-100 (1%) ${\fallingdotseq}$ hydrogen peroxide (3%) > ethanol (100%) ${\fallingdotseq}$ chlorhexidine (0.2%, 2%) > phosphate buffer saline (PBS). Conclusion: From this study, suitable conditions for hamster mucosal irritation testing were suggested and this method was verified through materials commonly used on oral mucosal membranes.
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
제29권5호
/
pp.282-292
/
2003
Several agents are in use to promote new bone formation during bone graft procedures in maxillofacial region. Among them, we have used crude BMP, PRP, and P-15 for experimentally created defects with accompanying graft materials in the rabbit model. The aim of this study is to analyze the effect of above mentioned agents on bone formation using histologic and histomorphometrical methods, thus to provide experimental support for clinical application of these agents. Six rabbits were used as experimental animals. Four surgical defects were created on the distal femoral heads of each animal using trephine drill. The defects were filled with each agents with accompaning graft materials as experimental groups and particulate corti-co-cancellous autogenous graft as control. For histomorphometric analysis, fluorescent dye was injected at 2week and 1week before sacrifice. Then, the animals were sacrificed at 2, 4 and 8weeks after surgery and histologic and histomorphometric examinations were achieved. At two weeks after bone graft, bone formation and active remodeling process were examined in all experimental groups and the control. But the intensity of such activities of the experiments were somewhat weaker than that of the control. In BMP group, the amount of newly formed osteoid was increased constantly and the amount was preserved constantly in PRP group. But in P-15 group, the amount of newly formed osteoid was decreased with time to 8week after surgery. Histologic findings showed superior bony quantity and quality in PRP group than that of P-15 group. MAR(Mineralization Apposition Rate) of all experimental groups were slower than that of control group. In P-15 group, constant foreign body reaction was observed at all periods and the graft material showed inwardly destroyed characteristics rather to mature. The data from this study provide the basis for future studies for evaluating the long-term remodeling process and foreign body reactions observed in P-15 group and clinical study for predictable use of these agents.
The purpose of this investigation was to evaluate the acceptability of the collagen-based xenograft ($Laddec^{(R)}$). Full thickness bone defects were prepared in the calvaria of the rats. In the experimental groups the bone defects were filled with a kind of collagen based xenograft. And bone defects, which left without filling, were used as control groups. Sequential sacrifice was performed at the 1st, 2nd, 4th, 8th, and 16th weeks of experiment. 1. At the 1st week of experiment, infiltration of chronic inflammatory cell was observed in all groups. In the experimental group, resorption of the xenograft was initiated. 2. At the 2nd week of experiment, infiltration of chronic inflammatory cells was decreased in all groups. In the experimental group, active resorption of xenograft and new bone formation from the periphery of the xenograft was observed. 3. At the 4th and 8th weeks of experiment, more resorption of the xenograft and new bone formation with calcification was observed in the experimental group. 4. At the 16th week of experiment, small bone trabecula was formed partially in the control group but that couldn't fill the whole bone defect. In the experimental group, more advanced resorption of xenograft and more new bone formation was observed. However mid portion of the xenograft was still remained without resorption. 5. From this experiment, we concluded that the collagen-based xenograft had some osteoconductive but no osteoinductive property. So the xenograft would be used for the bone defect filling material where rapid bone remodeling is not required.
This study is to investigate the meaning and value of Usonian Automatic House System(UAHS) of Frank Lloyd Wright in his later period, focused on materials, methods, and his thoughts. The results of this study are follows. UAHS was the outcome of moderate cost and prefab house which Wright had successively attempted after the early Prairie period. The construction was simple and comparatively cheap, but subsequent automatics were difficult and expensive to build. Nevertheless, it was sufficiently flexible to support a rather wide range of house designs. Concrete was the inert mass and a plastic material. Wright saw a kind of weaving coming out of it. He also saw a kind of concrete masonry, steel for warp and masonry units for woof in the automatic concrete block. The reinforced bars in hollowed joints of concrete block increased the safety factor and affected the expression of the construction through the stabilization they provided. But they did not give concrete block the capability of structural span. Standardization as the soul of the machine might be seen in UAHS. The concrete blocks were more cheap, lighter, and larger hollowed plain than textile blocks in 1920s. But the variety of pattern and different block types in the UAHS were achieved at some sacrifice of standardization. The repetitive nature of production was compromised for artistic goals. The sense of compromise was not maximized, however, because the units as installed looked far more repetitive than they actually were.
중국의 아프리카에 대한 자원 외교는 성공적인 결과를 이루어내고 있다. 이러한 결과는 1990년대 이후 뚜렷하게 나타났던 '에너지 확보를 위한 원조 정책(aid-for-energy strategy)'처럼 단기간의 경제협력만으로 이루어진 것이 아니다. 중국은 1955년 반둥회의에서 아프리카와 첫 공식적인 외교 접촉을 가진 후 다양한 후원을 반세기 이상 지속하였다. 중국과 아프리카의 관계를 다룬 지금까지의 연구는 1990년대 이후 중국의 석유 및 천연자원 분야, 자원민족주의, 자원패권주의를 다루는 것에 편중되어 있었다. 따라서 이념으로 시작된 국제관계가 어떤 과정을 통해 정치 경제 분야로 파급되었는지에 대한 논의의 필요성이 제기되었다. 이러한 취지에서 본 연구는 1955년 '반둥회의'와 1957년 '아시아-아프리카 인민연대회의'를 중심으로 중국과 아프리카의 최초 공식 접촉과 그에 이어지는 관계의 발전을 고찰함으로써 중국의 대(對) 아프리카 정책의 초기단계를 이해하는데 목적이 있다.
As the first part of the body that strikes the ground during running, sports shoes are especially important for improving performance and reducing injuries. The use of new nanotechnology materials in the shoe's sole that can affect the movement angle of the foot and the ground reaction forces during running has not been reported yet. It is important to consider the material of the sole of the shoe since it determines the long-term performance of sports shoes, including their comfort while walking, running, and jumping. Running performance can be improved by polymer foam that provides good support with low energy dissipation (low energy dissipation). Running shoes have a midsole made of ethylene propylene copolymer (EPP) foam. The mechanical properties of EPP foam are, however, low. To improve the mechanical performance of EPP, conventional mineral fillers are commonly used, but these fillers sacrifice energy return. In this study, to improve the magnificence of physical education training with nanotechnology, carbon nanotubes (CNTs) derived from recycled plastics were prepared by catalytic chemical vapor deposition and used as nucleating and reinforcing agents. As a result of the results, the physical, mechanical, and dynamic response properties of EPP foam combined with CNT and zinc oxide nanoparticles were significantly improved. When CNT was added to the nanocomposites with a weight percentage of less than 0.5 wt%, the wear resistance, physical properties, dynamic stiffness, compressive strength, and rebound properties of EPP foams were significantly improved.
11 종의 목이버섯 자실체로부터 얻은 50% EtOH추출물을 사용하여 지방전구세포인 3T3-L1의 지방세포 분화억제 효과를 확인한 모든 strain에서 억제효과가 존재하였다. 털목이에서는 21001 균주가 가장 우수하였고 흑목이에서는 21002 균주가 억제효과가 우수하였다. 전반적으로 털목이가 흑목이에 비해 지방세포 분화억제 효과가 우수하였다. 또한 Adipocyte RNA 발현량과 protein 발현량 측정 실험에서도 털목이 21001 균주가 지방세포 분화억제 효과에 있어서 가장 우수하였다. 털목이 21001 버섯을 사용하여 동물실험을 진행한 결과 털목이 자실체 분말이나 50% EtOH 추출물을 급여한 실험에서 체중 감소효과가 나타났으며, 특히 EtOH 추출물 0.2%를 급여한 군에서 유의하게 감소함을 확인하였다(*P<0.05). 동물 희생 후 적출한 간 중량 및 부고환지방량과 혈청 내 중성지방 및 총 콜레스테롤, 혈당, ALT, AST 등도 털목이버섯 21001 EtOH 추출물 0.1% 이상 급여 시 고지방식이만을 급여한 군에 비해 유의차(*P<0.05 이상) 있게 감소함을 확인하였다.
This paper is to investigate the effect of corrosion by acoustic emission method in tensile loading and the adhesiveness between substrate and coating layer. The powders used are Zn and Amdry625, respectively. They are coated on brass alloy substrate. AE signals of Zn and Amdry625 coating layer increase drastically in strain $2\%$. However, those of Zn specimen have more than those of Amdry625 specimen. When the specimens executed the corrosion test under $3.5\%$ NaCl solution for 500, 1000 hours, the salt solution penetrated into the surface of the substrate through the pores of the coating layer. As a result, corrosion production formed on the surface of the substrate. The adhesiveness between coating layers is weakened by the polarization and corrosion itself. The AE event, count, and energy of corroded coating specimens decrease, compared to specimens without corrosion. The results are summarized as follows : 1. In the tensile tests, the time that it took to start and develop the cracks and exfoliations between the surface of the substrates and the plasma spray coatings were different according to the type of plasma sprayed material, which are Zn and Amdry625. These phenomena were obvious at the strain rate 1 to $5\%$, and few available data were found after that stage. 2. The specimens with Zn coating showed the characteristics of crack, according to the changes of the tensile strength applied on the substrates while those with Amdry625 showed exfoliation as a result of low adaptation to the tensile strength. 3. The anti-corrosion specimens showed that the adhesive properties between the substrate and the plasma spray coating were strong in the order of Zn, Amdry. It showed that Corroded specimens cracked or exfoliated easily, even with the small energy, because those had a comparatively weakened adhesive property, due to corrosion. 4. Zn specimen showed no corrosion phenomena on the surface of the substrates, because they had the function of sacrifice anode however, Amdry625 specimen showed the corrosion, because it did not have that function.
$D{\acute{o}}ck$ (Korean rice cake) is a peculiar food of Korea made of grain. By means of cooking from, it is defined as 'Pulvberzed food of grain' $D{\acute{o}}ck$ was one of the daily food, but development of boild rice had narrowed it's use to the food of festive days and ceremonies. $D{\acute{o}}ck$ is used as a main food of all Kinds of ceremonies from one's birth to death, such as the Three seven day(a baby's twenty-first day of life), one hunderdth day, birthday, wedding, both brithday, funeral and sacrifical rites, vocational ceremonies, such as a sacrifice to spirits and a srevics for a big catch of fish. It is also used as a present and seasonal food. A large variety of $D{\acute{o}}ck$ is available and its recipe is scientific and reasonable. In this treatise, the Kinds of $D{\acute{o}}ck$ and the frequency of them, the material, the recipe, the measuring unit of material, cooking kitchen utensils and the cooking terms are studied from the books published in Korea from 1670 to 1943. 1. $D{\acute{o}}ck$ was classified as Tcbin $D{\acute{o}}ck$(steamed), Chin $D{\acute{o}}ck$(strikn), Chijin $D{\acute{o}}ck$(fried) and Salmun $D{\acute{o}}ck$(boiled), according to its way of cooking. 2. There were 122 Kinds of $D{\acute{o}}ck$, 57 were Tchin $D{\acute{o}}ck$, 35 Chin $D{\acute{o}}ck$, 20 Chijin $D{\acute{o}}ck$, and 10 Salmun $D{\acute{o}}ck$. 3. There were 34 Kinds of measuring units. Of them, 13 for volume, 4 for weight, 9 for quantity, 4 for length and 4 for the rest. 4. There were 55 Kinds of cooking Kitchen utensils but now many of them are not used because of mechanization or automation of tools of living. 5. There were 143 Kinds of cooking terms. Of them 49 for the preparing process, 25 for the mixing process, 27 for well-forming process 10 for process of getting ready to cook, 14 for heating process, 10 for cutting process, 5 for dishin process and 3 for process of soaking in sugar or honey.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.