• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.5
• /
• pp.389-396
• /
• 2017

Peridynamics has been widely used in the dynamic fracture analysis of brittle materials. Recently, various crack patterns(compact region, floret, Hertz-type crack, etc.) of multilayered glass structures in experiments(Bless et al. 2010) were implemented with a bond-based peridynamic simulation(Bobaru et al.. 2012). The actual glass layers are bound with thin elastic interlayer material while the interlayer is missing from the peridynamic model used in the previous numerical study. In this study, the peridynamic interlayer modeling for the multilayered structures is proposed. It requires enormous computational time and memory to explicitly model very thin interlayer materials. Instead of explicit modeling, fictitious peridynamic particles are introduced for modeling interlayer materials. The computational efficiency and accuracy of the proposed peridynamic interlayer model are verified through numerical tests. Furthermore, preventing penetration scheme based on short-range interaction force is employed for the multilayered structure under compression and verified through parametric tests.

• Journal of Life Science
• /
• v.25 no.2
• /
• pp.189-196
• /
• 2015

Bacterial diversity was studied in the rhizosphere of Suaeda japonica Makino, which is native to Suncheon Bay in South Korea. Soil samples from several sites were diluted serially, and pure isolation was performed by subculture using marine agar and tryptic soy agar media. Genomic DNA was extracted from 29 pure, isolated bacterial strains, after which their 16S rDNA sequences were amplified and analyzed. Phylogenetic analysis was performed to confirm their genetic relationship. The 29 bacterial strains were classified into five groups: phylum Firmicutes (44.8%), Gamma proteobacteria group (27.6%), Alpha proteobacteria group (10.3%), phylum Bacteriodetes (10.3%), and phylum Actinobacteria (6.8%). The most widely distributed genera were Bacillus (phylum Firmicutes), and Marinobacterium, Halomonas, and Vibrio (Gamma proteobacteria group). To confirm the bacterial diversity in rhizospheres of S. japonica, the diversity index was used at the genus level. The results show that bacterial diversity differed at each of the sampling sites. These 29 bacterial strains are thought to play a major role in material cycling at Suncheon Bay, in overcoming the sea/mud flat-specific environmental stress. Furthermore, some strains are assumed to be involved in a positive interaction with the halophyte S. japonica, as rhizospheric flora, with induction of growth promotion and plant defense mechanism.

• Journal of Conservation Science
• /
• v.7 no.1
• /
• pp.9-18
• /
• 1998

There are about 1470 stone-cultural properties in Korea which have been registered and protected by the government. Representative of them are pagoda, stupa, stone-buddha, stele support of banner pole and stone-lanterns. Most of them have been exposed to and weathered by natural environments. Stone-cultural properties are destroyed and/or destructed mostly by weathering and its related features of rocks. Therefore, it is necessary to conduct geological studies on the weathering phenomena and related features as well as characteristics of the rock itself must be done for the conservation. Thus geological investigation should include detail measurements, rock varieties and phases, structural lineaments of the rock, cause and degree of weathering, degree and patterns of crack development structural stability, identification of reusable parts for restoration, geomorphological characteristics of the site, and etc. The interaction among these factors must be investigated and analyzed, which must be used as basic data to establish the guideline of conservation and to plan for repair and/or restoration. The conservation plan should involve parts to be repaired, method of repair, type of cementing material, the characteristics of rock phases to be supplemented, method for maintaining structural stability, and method to delay or to prevent the rock weathering.

• Restorative Dentistry and Endodontics
• /
• v.31 no.6
• /
• pp.415-426
• /
• 2006

In this study, the changes in the degree of conversion (DC) and the microtensile bond strength (MTBS) of self-etching adhesives to dentin was investigated according to the time after curing. The MTBS of Single Bond (SB, 3M ESPE, USA), Clearfil SE Bond (SE, Kuraray, Japan), Xeno-III (XIII, Dentsply, Germany), and Adper Prompt (AP, 3M ESPE, USA) were measured at 48h, at 1 week and after thermocycling for 5,000 cycles between 5$^{\circ}$C and 55$^{\circ}$C. The DC of the adhesives were measured immediately, at 48h and at 7 days after curing using a Fourier Transform Infra-red Spectrometer. The fractured surfaces were also evaluated with scanning electron microscope. The MTBS and DC were significantly increased with time and there was an interaction between the variables of time and material (MTBS, 2-way ANOVA, p = 0.018; DC, Repeated Measures ANOVA, p < 0.001). The low DC was suggested as a cause of the low MTBS of self-etching adhesives, XIII and AP, but the increase in the MTBS of SE and AP after 48h could not be related with the changes in the DC. The microscopic maturation of the adhesive layer might be considered as the cause of increasing bond strength.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.3
• /
• pp.119-126
• /
• 2019

For this purpose, research was made to look into the style, material, organization, and legal as well as institutional system of the bonsai industry in the three countries. In order to understand what significance it has and how it has changed historically, related literature was surveyed and questionnaires were distributed to the concerned people to collect the data needed for them to plan bonsai industry. The results of the survey are as follows. Analysis of awareness of bonsai culture, respondents replied that the motive and purpose of bonsai is because they like flower trees, and the technical information about bonsai is usually obtained by visits to bonsai gardens. The analysis revealed that respondents usually join more than one bonsai club and are active more than once a month, which means longer than 4 hours each month, and their activities are more frequently in the metropolitan area. From the analysis of preference for bonsai culture, it was made known that the favorite bonsai size is less than middle one(20~50cm), the characteristics of the favorite species are beauty. A research and analysis of bonsai-related technical education found that bonsai is trimmed manually in general, bonsai experts are usually kept in contact with, and the bonsai technique is learned through interaction with the experts.

• Korean journal of communication and information
• /
• v.44
• /
• pp.223-247
• /
• 2008

The purpose of this study is to explore the anti-smoking message effects and smoking status on smoking belief attributes. Based on the health behavior theories such as theory of reasoned action, health belief model, and social cognitive theory, three factors are selected to investigate the effects of anti-smoking campaign messages. The balance of benefits and barriers, self-efficacy, and social pressure are selected as independent variables. Three two-way ANOVA were conducted. Results showed that the main effect of social pressure were found with the social smoking attributes. Interaction effects were found on the nonsmoker-social pressure group and the non-smoker-two sided message group. It is found that nonsmokers accepted these two anti-smoking messages easily as compared to smoker groups. No main smoking status was found in this study; it is believed that smoking is a habitual that is not changed easily because attitude formation takes time. Results revealed that the two-sided message video releases and the social pressure video releases were favored by both smokers and nonsmokers. This study contributes the theoretical framework that can be transferred to the practices of anti-smoking campaign. Also, the researcher produced the televised stimuli which is not common in health message studies. By using the televised message material, the research tried to solve the validity problem which is common in experimental design.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.5
• /
• pp.514-525
• /
• 2001

The purpose of this study was to compare the marginal fit of provisional restorations by differentiating the removal time and setting temperature during resin polymerization. After mixing autopolymerizing methyl methacrylate resin, the material was placed in a preformed resin shell crown. The crown was seated on a die with 1mm shoulder margin. Crowns were removed after 3, 4, 5, 6 minutes and polymerization was continued under the following conditions : $25^{\circ}C$ air, $30^{\circ}C,\;40^{\circ}C,\;50^{\circ}C,\;60^{\circ}C,\;70^{\circ}C$ water. After polymerization. the crown was sectioned. The marginal & occlusal discrepancies were measured. The mean marginal discrelpancies at 3 minutes, 4 minutes, 5 minutes and 6 minutes of removing time were $96.6{\mu}m.\;84.6{\mu}m,\;86.7{\mu}m$ and $105.6{\mu}m$. The mean occlusal discrepancies at 3 minutes, 4 minutes, 5 minutes and 6 minutes of removing time were $106.7{\mu}m,\;89.3{\mu}m,\;98.6{\mu}m$ and $127.7{\mu}m$. There was significant difference between 4 minutes group and 6 minutes group in occlusal discrepancies. The mean marginal & occlusal discrepancies for crowns polymerized in $25^{\circ}C$ air were $98.2{\mu}m$ and $124.1{\mu}m$. The crowns polymerized in $50^{\circ}C$ water demonstrated the smallest marginal & occlusal. discrepancies. The mean value of marginal & occlusal discrepancies in $50^{\circ}C$ water were $73.1{\mu}m$ and $77.5{\mu}m$. These values were smaller than that of $25^{\circ}C$ air. There were significant differences in the occlusal discrepancies between $25^{\circ}C$ air and water conditions of $50^{\circ}C$ water (${\alpha}=0.05$) but. no significant difference in marginal discrepancies. There was no significant difference in the interaction between time and temperature. 4 minutes waiting time & $50^{\circ}C$ water polymerizing condition produces the best fit at the margin of the provisional crown.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.6
• /
• pp.1029-1044
• /
• 2017

The Discrete Element Method (DEM) is one of the useful numerical methods to analyze the behavior of the ground formation by computing the motion and interaction using particles. The DEM has not been applied in civil engineering but also a wide range of industrial fields, such as chemical engineering, pharmacy, material science, food engineering, etc. In this study, to review a performance of the spoke-type earth pressure balance (EPB) shield TBM (Tunnel Boring Machine), the commercial software based on the DEM technology was used. An analysis of the TBM during excavation was conducted according to two pre-defined excavation conditions with the different rotation speed of a cutterhead. During the analysis, the resistant torque at the face of the cutterhead, the compressive force at the cutterhead and shield surface, the muck discharge at the screw auger were measured and compared. Upon the two kinds of excavation conditions, the applicability of the DEM analysis was reviewed as a modelling method for the TBM.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.469-474
• /
• 2002

In recent years, modularization of engine parts has increased the application of plastic products in air intake systems. Plastic intake manifolds provide many advantages including reduced weight, contracted cost, and lower intake air temperatures. These manifolds, however, have some weakness when compared with customary aluminium intake manifolds, in that they have low sound transmission loss because of their lower material density. This low transmission loss of plastic intake manifolds causes several problems related to flow noise, especially when the throttle is opened quickly. The physical processes, responsible for this flow noise, include turbulent fluid motion and relative motion of the throttle to the airflow. The former is generated by high-speed airflow in the splits between the throttle valve and the inner-surface of the throttle body and surge-tank, which can be categorized into the quadrupole source. The latter induces the unsteady force on the flow, which can be classified into the dipole source. In this paper, the mechanism of noise generation from the turbulence is only investigated as a preliminary study. Stochastic noise source synthesis method is adopted for the analysis of turbulence-induced, i.e. quadrupole noise by throttle at quick opening state. The method consists of three procedures. The first step corresponds to the preliminary time-averaged Navier-Stokes computation with a $k-\varepsilon$ turbulence model providing mean flow field characteristics. The second step is the synthesis of time-dependent turbulent velocity field associated with quadrupole noise sources. The final step is devoted to the determination of acoustic source terms associated with turbulent velocity. For the first step, we used market available analysis tools such as STAR-CD, the trade names of fluid analysis tools available on the market. The steady state flows at three open angle of throttle valve, i.e. 20, 35 and 60 degree, are numerically analyzed. Then, time-dependent turbulent velocity fields are produced by using the stochastic model and the flow analysis results. Using this turbulent velocity field, the turbulence-originated noise sources, i.e. the self-noise and shear-noise sources are synthesized. Based on these numerical results, it is found that the origin of the turbulent flow and noise might be attributed to the process of formulation and the interaction of two vortex lines formed in the downstream of the throttle valve. These vortex lines are produced by the non-uniform splits between the throttle valve and inner cylinder surface. Based on the analysis, we present the low-noise design of the inner geometry of throttle body.

• Korean Journal of Social Welfare
• /
• v.59 no.4
• /
• pp.319-346
• /
• 2007

The main purpose of this research is to figure out systematically the total amount of social welfare resources in Korea. For the stated purpose, this research (1) defines the concept of social welfare resource, (2) develops basic framework for measuring total amount of resources, (3) estimates total amount of social welfare resources based on the year of 2004, and (4) presents some implications of findings. Social welfare resource is defined as any valuable things, material or immaterial, that one can put into instrumental use in order to meet social needs or to resolve problems in the interaction process between human and the environment. Institutional sectors of social welfare resource consist the following 5 major areas derived from resource providers: The government, enterprise, market, the third sector (religion & welfare institutions, fundraising agencies, and NPOs), and community (families, relatives, and neighborhoods). For the estimation of the total amount of social welfare resources, this research takes advantages of both the major methods of provider centered approach and the intermediary agent centered approach. Based on the compromised method estimation, the total amount of social welfare resources in Korea in the year of 2004 is 147 trillion won (approximately, 148 billion dollars and 19% of GDP). Among them, central and local governments provide 52 trillion won. The private sector expends a total of 109 trillion won, which contains 44 trillion from enterprise, 54.3 trillion from market, 3.0 trillion from the third sector, and 8.3 trillion from the community. The enterprise and market share of welfare resources exceeds 66% of the total expenditure, and the market is expected to increase gradually in the near future.