• Structural Engineering and Mechanics
• /
• 제58권4호
• /
• pp.719-729
• /
• 2016

The main objective of the present paper is to study the effect of the yield criterion on the magnitude of the strain rate and plastic work rate intensity factors in axisymmetric flow of isotropic incompressible rigid perfectly plastic material by means of a problem permitting a closed-form solution. The boundary value problem consisting of the axisymmetric deformation of a plastic tube is solved. The outer surface of the tube contracts. The radius of the inner surface does not change. The material of the tube obeys quite a general yield criterion and its associated flow rule. The maximum friction law is assumed at the inner surface of the tube. Therefore, the velocity field is singular near this surface. In particular, the strain rate and plastic work rate intensity factors are derived from the solution. It is shown that the strain rate intensity factor does not depend on the yield criterion but the plastic work rate intensity factor does.

• 한국병원경영학회지
• /
• 제26권2호
• /
• pp.17-26
• /
• 2021

Purposes: This study aims to identify factors affecting dental university hospitals' profitability and understand recent their business condition. Methodology: Data from 2016 to 2019 was collected from financial statement, public open data in 8 dental university hospitals. For the study, multiple regression test with stepwise selection was applied. Findings: First of all, 9 out of 19 independent variables were selected by stepwise selection. As a result of multiple regression test with selected independent variables and the dependent variable(operating profit margin ratio), the factors affecting hospitals' profitability were the number of dental unit chair, hospital location, debt ratio, total capital turnover ratio, employment cost rate, material cost rate, management expense rate, the number of patient per a dentist. Practical Implication: To improve dental university hospitals' profitability, hospitals specifically analysis and manage their cost such as employment, material and management cost and seek effectiveness by managing the proper number of patient per a dentist.

• 패션비즈니스
• /
• 제6권5호
• /
• pp.96-111
• /
• 2002

The aim of this study was to suggest appropriate factors for production pattern making of women's clothing. Sample pattern designers and production patterners of 13 women's brands were individually interviewed about pattern making process and factors necessary. The results were as follows: The factors to be considered in pattern making were categorized in three groups. 1. Factors to be considered to achieve the correct use of specific materials: elasticity, shrinkage, lining and interlining 2. Factors to be considered to satisfy the design specifications: silhouette, dart distribution, collar and sleeve, trimming 3. Factors to be considered for better sewing quality: skillfulness of the sewer, sewing methods and sewing equipment. 4. Suggestions were made for appropriate factors. A focus-group-interview in pattern design has been interviewed to verify the suggested factors. The factors were presented as a guide to develop the production pattern. 5. For better usage of the factors, standardization were suggested for making process with necessary factors for jacket, skirt.

• Nuclear Engineering and Technology
• /
• 제29권6호
• /
• pp.444-450
• /
• 1997

The current ASME code for reinforced concrete containment structures are not based on probability concepts. The stochastic nature of natural hazard or accidental loads and the variations of material properties require a probabilistic approach for a rational assessment of structural safety and performance. The paper develops design load factors for the serviceability limit state of reinforced concrete containment structures. The target limit state probability is determined and the load factors are calculated by the numerical analysis. Design load factors are proposed and carried out the reliability assessments.

• 경영과정보연구
• /
• 제17권
• /
• pp.107-133
• /
• 2005

The purpose of this study was to analyze a trend of profitability classified by characteristics of hospitals and to analyze related factors. The data for this study were derived from survey material conducted by the Korean Hospital Association on 33 hospitals in Korea between 1993 and 2002. Profitability was measured in the aspect of investment profit rate and operation profit rate with net profit to total assets, normal profit to total assets and operating margin to gross revenue as dependent variables. Independent variables were classified by general factors (ownership, number of beds, period of establishment, region), financial factors (total asset turnover, liabilities to total assets, current ratio, fixed ratio, inventories turnover, personnel costs per operation profit, material costs per operation profits), composition of manpower and facilities(personnel and area per beds), productivity index(the number of daily patients per medical doctor, the number of daily patients per nurse), the score of quality assurance activities. First, Concerning the specialists per beds or area per beds and profitability of hospitals there was not statistically significant. Second, Those hospitals having the most daily patients per nurse had significantly higher profitability than the others, but the number of daily patients per medical doctor had little effect on the profitability. Thirds, Those hospitals having a higher proportion total asset turnover tended to show significantly higher profitability compared to other hospitals, but the liabilities to total assets and liquidity ratio had a little difference to the profitability. Those hospitals having a higher proportion personnel costs per operation profit and material costs per operation profits tended to show significantly lower hospital profitability compared to other hospitals. Fourth, In regression analysis, hospital profitability had negative relationship with personnel costs per operation profit or material costs per operation profits. While it had positive relationship with total asset turnover, the number of daily patients per nurse. In conclusion, private hospitals had higher profitability than that of public hospitals. Though factors related to profitability of hospital were different according to ownership, it is important for securing appropriate profitability by operating appropriate number of nurse, raising total asset turnover, and reducing personnel costs, material costs per operation profits. This study can be used as a baseline data for planning of hospital management. But the study may be limited in that the results cannot be generalized due to its small sample size. However, this longitudinal observation of 33 hospitals over ten year period has significant merit alone.

• 품질경영학회지
• /
• 제31권4호
• /
• pp.226-238
• /
• 2003

Recently, The problems with which our country's company is confronted for business of manufacturing goods. This study set the hypothesis to develop the method that was analysis and application of A reliability evaluation method of environmental material for circuit components in Computer, Color TV, Monitor, Microwave oven, Electric Refrigerator, Automobile parts, other goods. Especially, this study emphasis on regulate export of the EU and North America that it's a environmental material's hazards problem. In this process, this study set the pattern of practical application. Therefore, this study emphasis on the application of A reliability evaluation method of environmental material and the use of other parameters by environmental reliability test data. The result of this study is as follows. 1) There is relationship between regulate material and technical protecting system. 2) Characteristics of hazard materials is operating a healthcare damage factor as well as regulate environmental factors.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2008년 추계학술발표대회 논문집
• /
• pp.448-451
• /
• 2008

This study is under doing to suggest application manual using assembling reference plane design & standard finish material basis upon material classification code as a tool of a linkage between building design and construction standarization in order to enlarge the applicability of house building material that is produced by the module plant. We can say the goal of building standardization intend not only the improvement of construction productibility but also guarantee of subsequent performance through automatization basis upon informationalization of building design. For a etabilishing of this condition, it is neccessary to link the standardization's result of material--design--construction field. According to this neccessity, we are going to suggest information factor that can make relative business manager easily approach to the standardization practical task.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.533-540
• /
• 2001

Material damping is an important parameter to evaluate the site response by a dynamic loading. Currently the material damping of the subgrade is mainly determined by a resonant column testing. Typical methods to evaluate material damping include half-power bandwidth method and free-vibration decay method. In the large strain range, the half-power bandwidth method gives an erratic damping factor, because the method is based on the assumption of the linear behavior of a specimen. The free-vibration decay method has also limitations in that the damping factors vary with the range of cycles in calculation, and also in that the specific shear strain can not be designated for the free vibration. In this study, the frequency-phase method, which was developed to evaluate material damping of a beam simply supported, is introduced to evaluate the material damping by the resonant column testing. Also, the comparison among half-power method, free-vibration decay method and the frequency-phase method is provided for a remolded sand.

• 산업경영시스템학회지
• /
• 제21권47호
• /
• pp.243-251
• /
• 1998

These days material handling accidents and injuries are some of the most common in the workplace. 20-45% of all occupational injuries is taken place in the area of material handling industry. The control and management of material handling activities can have a significant impact on the workforce safety and productivity in the manufacturing industry. This paper is to suggest effective countermeasures for reducing and protecting occupational accidents in the area of material handling industry. To do so, firstly, we found out the relationship between occpational accidents and business. Secondly, we are to analyse overall occupational accidents caused by material handling tools. Thirdly, we found out important factors of occupational accidents and injuries in the area of material handling industry by analysing 10 cases in detail, which have been occured from 1994 to 1997 in the workplace.

• Steel and Composite Structures
• /
• 제13권2호
• /
• pp.187-206
• /
• 2012

In this study, fracture analysis of orthotropic FGM (Functionally Graded Material) plate having center crack is performed, numerically. Material axis arbitrarily oriented and there is an angle ${\theta}^{\circ}$ between material and crack axes. Stress intensity factors at the crack tips for Mode I are calculated using Displacement Correlation Method (DCM). In numerical analysis, effects of material properties and variation of angle ${\theta}^{\circ}$ between material and crack axes on the fracture behavior are investigated for four different boundary conditions. Consequently, it is found that the effect of ${\theta}^{\circ}$ on stress intensity factor depends on variation of material properties.