• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1C
• /
• pp.43-52
• /
• 2006

Despite several constitutive models have been proposed and applied, it is still difficult to choose a suitable model and to estimate adequate analysis parameters. Furthermore, a cyclic shear behavior under the volume change caused by the seepage is more complex. None of the constitutive model is available at present in the expression of the cyclic behavior of soil under an additional volume change condition by seepage. Therefore, a new geotechnical hybrid simulation system which can control the pore water immigration was developed. The system enables a quantitative evaluation of the residual deformation such as lateral spreading and settlement caused by the liquefaction. The seismic responses in a one-dimensional slightly inclined multilayered soil system are taken into consideration, and the soils are governed by both equation of motion and the continuity equation. Furthermore, the estimation and the selection of the soil parameter for the representation of the strong nonlinearity of the material are not required, because soil behaviors under the earthquake motions are directly introduced instead of a numerical soil constitutive model. This paper presents the concept and specifications of the system. By applying the system to an example problem, the permeability effect on the seismic response during cyclic shear is studied. The importance of the volume change characteristics of sandy soil during and after cyclic shear is shown in conclusion.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1A
• /
• pp.53-59
• /
• 2010

Recently, NDTs (Non-Destructive Techniques) using infrared camera are widely studied for detection of damage and void in RC (reinforced concrete) structures and they are also considered as an effective techniques for maintenance of infrastructures. The temperature on concrete surface depends on material and thermal properties such as specific heat, thermal conductivity, and thermal diffusion coefficient. Different porosity on cement mortar due to different mixture proportions can show different heat behavior in cooling stage. The porosity can affect physical and durability properties like strength and chloride diffusion coefficient as well. In this paper, active thermography which uses flash for heat induction is utilized and thermal characteristics on surface are evaluated. Samples of cement mortar with W/C (water to cement ratio) of 0.55 and 0.65 are prepared and physical properties like porosity, compressive strength, and chloride diffusion coefficient are evaluated. Then infrared thermography technique is carried out in a constant room condition (temperature $20{\sim}22^{\circ}C$ and relative humidity 55-60%). The mortar samples with higher porosity shows higher residual temperature at the cooling stage and also shows reduced critical time which shows constant temperature due to back wall effect. Furthermore, simple equation for critical time of back wall effect is suggested with porosity and experimental constants. These characteristics indicate the applicability of infrared thermography as an NDT for quality assessment of cement based composite like concrete. Physical properties and thermal behavior in cement mortar with different porosity are analyzed in discussed in this paper.

• The Korean Journal of Archival Studies
• /
• no.77
• /
• pp.151-187
• /
• 2023

The cooperation between archives and libraries is necessary for the management of limited operational space and the improvement of work efficiency. "Larchive" is one of the model of cooperation between libraries and archives, so it can be an alternative plan for institutions that face difficulties in collaborating through "Larchiveum" - growing model of cooperation between libraries, archives, and museums. This study presents the recognition of Larchive to university archivists and librarians, and suggests a practical operation plan for cooperation between the archive and library. As a result, "Larchive" was relatively less aware of archivists and librarians, but in the practical point of view, respondents were fully aware of the need for cooperation between archives and libraries. In particular, Larchive was presented as a rational alternative model for both of the groups. And the need for material cooperation can be confirmed through the recognition survey, and the improvement plan for business cooperation can be confirmed through the FGI. Some prerequisites are proposed such as securing a collaborative workplace, assignment of budget and manpower. Through the results, this study presented practical operational plans for organizational cooperation in the form of Larchive, focusing on the perspectives of "teaching and learning support", "research support services", "curation services", "collection and management of school history data", "cooperation for evaluation", and drew discussion points.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.425-432
• /
• 2023

In this study, we aim to develop a carbon-reducing concrete technology by incorporating biochar. Performance evaluation experiments were conducted on concrete mixtures containing biochar with insulating and carbon-capturing properties, which are essential for key infrastructure sectors such as construction and tunnels. Concrete mixtures were designed with different biochar incorporation rates of 0 %, 5 %, 10 %, 15 %, and 20 %, as w ell as w ater-to-binder ratios of 0.25, 0.30, 0.35, and 0.40. To assess the physical properties of each mixture, unit weight, total porosity, and permeability were measured, while mechanical properties were determined through the measurement of concrete compressive and flexural strengths. Key factors for enhancing the insulating effect of carbon-reducing concrete containing biochar were identified through regression analysis, indicating a close correlation among biochar incorporation rate, unit weight, concrete strength, and thermal conductivity. It is anticipated that it can be utilized as an insulating material to enhance thermal performance in northern regions with severe winter climates.

• Membrane Journal
• /
• v.33 no.6
• /
• pp.398-408
• /
• 2023

This work developed a hood and filter for antibacterial protective clothing for medical powered air purifying respirators (PAPR) that can be used in medical settings and quarantine against infectious diseases such as Zika virus, Middle East respiratory syndrome (MERS), and coronavirus disease-19 (COVID-19). The hood material of the protective clothing was made of polypropylene spunlace nonwoven fabric (SFS) was used for withstand wind pressure and external physcial pressure. Forthermore, in order to reduce the user's risk of infection, phytoncide-based materials were used on the outer-surface of the hood to achieve a 99.9% antibacterial effect, and the inner-surface were treated with hydro-philic materials to improve absorbency by 25%. In addition to evaluating the artificial blood penetration resistance, dry mi-croorganism penetration resistance, wet bacteria penetration resistance, and bacteriophage penetration resistance required for medical protective clothing hoods, it received a passing evaluation of levels 2-6. Meanwhile, as a result of evaluating the performance of the antibacterial treated spunlace high efficiency particulate air (HEPA) filter, excellent antibacterial properties, dust removal rate, and differential pressure effect were confirmed. All performance evaluations were conducted by an accredited certification body in accordance with the medical PAPR certification standards.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.3
• /
• pp.78-82
• /
• 2023

A fabrication of smart windows with controllable visible light transmittance in three steps by using λ/2 retardation films based on a reactive mesogen (RM) material and polarizing films is demonstrated. The phase retardation films with a Δn·d value of λ/2 (λ: wavelength) convert the direction of a traveling light to the optical axis of the film symmetrically. In this work, the retardation characteristics according to the RM thickness were evaluated and henceλ/2 phase retardation film can be fabricated. The phase retardation film with Δn·d of 276.1 nm, which is close to λ/2 (=275 nm @550 nm), was fabricated. The light transmittance of a smart window with the structure of (polarizing film)/(glass)/(alignment layer)/(λ/2 retardation film) was measured in the transmission mode, half mode and blocking mode. The evaluation results show that the transmittance of the smart window can be controlled in three steps with 35.8%, 27.8%, and 18.2% at each mode, respectively. In addition, by fabricating a smart window with a size of 15×200 mm², the feasibility of use in various fields such as buildings and automobiles was verified.

• Journal of the Korean Society of Radiology
• /
• v.17 no.5
• /
• pp.671-677
• /
• 2023

When a scintillator block is constructed using fine scintillator pixels, the scintillator block located at the edge of the scintillator block results in overlapping images. To solve this problem, a light guide was inserted between the scintillator block and the photosensor, and images of all scintillation pixels were separated and acquired. However, loss of light may occur through the light guide, which eventually affects the quality of the image due to a decrease in energy resolution. Therefore, in this study, a detector was designed that can separate scintilltion pixels better by using a reflector on the side of the light guide and can secre excellent energy resolution by minimizing light loss. For comparative evaluation with previous studies, flood images were obtained through DETECT2000 capable of light simulation, and the degree of separation and light collection rate were evaluated. When a reflector was used on the side of the light guide, all materials showed excellent separation regardless of the material of the light guide, which showed better separation results than previous studies. In addition, the light collection rate was more that five times better when the reflector was applied than when it wa not. If this detector is applied to a small animal positron emission tomography, it will be possilbe to secre excellent image quality through excellent spatial resolution and energy resolution.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.82-82
• /
• 2020

염증 (Inflammation)은 물리적인 상처나 세균감염이 되었을 때 손상된 조직을 재생하고 신체를 방어하기 위해 일어나는 선천성 면역반응으로 알려져 있다. 주로 선천면역을 담당하는 대식세포는 lipopolysaccharide, reactive oxygen species와 cytokine 등에 의해 활성화되어 tumor necrosis factor-α. interleukin-1β, interleukin-6 등 염증인자들의 생성에 관여한다. 특히, 산화질소는 superoxide 음이온과 쉽게 반응하고 peroxynitrite와 같은 독성이 강한 산화제를 생성하여 단백질 및 지질의 과산화를 유도하고 세포독성을 일으키는 것으로 보고되고 있다. 따라서 본 연구에서는 항산화 및 항염증 소재를 탐색하기 위해 오미자 (Schisandra chinensis), 꾸지뽕 (Cudrania tricuspidata)을 이용하여 항산화 활성을 평가하고자 하였으며, 세포주를 활용한 세포독성 및 항염증 활성을 확인하고자 하였다. 본 연구는 전북 순창군에서 재배된 오미자, 꾸지뽕을 열 건조(60℃) 통해 건조한 후 분말화하였다. 최적 추출 조건 선정을 위해 다양한 용매 (열수, 증류수, 주정 20, 40, 60%), 온도 (25, 40, 60, 80℃) 및 시간 (1, 2, 3, 4, 5 h) 조건에서 추출된 추출물의 총 폴리페놀 함량을 비교함으로써 최적 조건을 선정하였다. 오미자와 꾸지뽕의 DPPH 및 ABTS radical 소거 활성, 총 플라보노이드 함량을 확인하여 항산화능 및 기능성 성분 함량을 평가하였다. 또한 대식세포주인 Raw 264.7을 활용하여 MTT assay, 산화질소 생성 억제 활성을 확인하여 세포독성 및 항염증 활성을 평가하였다. 실험 결과, 오미자 및 꾸지뽕은 각각 주정 40%, 60℃ 그리고 증류수, 60℃에서 추출 시 가장 높은 총 폴리페놀 함량 (약 98.3 mg GAE/g 및 88.2 mg GAE/g)을 함유하며, DPPH 라디칼 소거 활성은 약 44.6% 및 24.4%, ABTS 라디칼 소거 활성은 약 30.3% 및 40.8%로 확인되었다. 총 플라보노이드 함량은 약 21.80 mg QE/g 및 35.68 mg QE/g으로 확인되었다. 또한 오미자 및 꾸지뽕 기능성 추출물을 100 ug/mL 처리 시 세포 독성이 나타나지 않는 것으로 확인되었으며, NO 생성량을 약 56.3% 및 21.7% 저감시켜 항염증 효능을 나타내는 것으로 확인되었다.

• Composites Research
• /
• v.36 no.6
• /
• pp.441-447
• /
• 2023

Recently, as demand for high-strength, lightweight materials has increased, there has been great interest in joining with metals. In the case of mechanical bonding, such as bolting and riveting, chemical bonding using adhesives is attracting attention as stress concentration, cracks, and peeling occur. In this paper, surface treatment was performed to improve the adhesive strength, and the change in adhesive strength was analyzed. For the adhesive strength test were conducted with Carbon Fiber Reinforced Plastic(CFRP), CR340(Steel), and Al6061(Aluminum), and laser and plasma surface treatment were used. After plasma surface treatment, the adhesive strength improved by 7.3% and 39.2% in CFRP-CR340 and CFRP-Al6061, respectively. CR340-Al6061 was improved by 56.2% in laser surface treatment. Surface free energy(SFE) was measured by contact angle after plasma treatment, and it is thought that the adhesion strength was improved by minimizing damage through a chemical reaction mechanism. For laser surface treatment, it is thought that creates a rough bonding surface and improves adhesive strength due to the mechanical interlocking effect. Therefore, surface treatment is effect to improve adhesive strength, and based on this paper, the long-term fatigue test will be conducted to prevent fatigue failure, which is a representative cause of actual structural damage.

• Economic and Environmental Geology
• /
• v.57 no.2
• /
• pp.177-184
• /
• 2024

This study was conducted to find a way to reduce the production of cakes generated in the domestic aggregate production process. Cakes from 8 wet aggregate producers were collected and particle size was analyzed. Samples were collected step by step from an aggregate producer A, particle size analysis was performed, and the material balance was calculated before and after an sand recovery unit by modeling the production process. As a result of the particle size analysis of eight cakes, one sample contained 50% sand, and the rest contained about 5% to 25% sand. The results showing that the cake contained a variety of sand in cakes may indicate that the recovery efficiency of the sand recovery units in the field varied. Sieve analysis of the samples showed that the generation of sand particles increased 2.8 times during the third crushing compared to the second crushing, and more cake particles were generated. As a result of simulating the sand recovery unit model, the lower the cut point of the cyclone and dewatering screen, the higher the sand production and the less cake production appeared. In order to reduce the production of cake in the field, it was determined that an optimal operation of the sand recovery unit was necessary in the aggregate production process.