• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.3
• /
• pp.185-196
• /
• 2006

Fracture toughness is a material property for crack initiation and propagation in fracture mechanics. For mode I fracture toughness measurement in concrete, RILEM committees 89-FMT proposed three-point bend tests based on the two-parameter fracture model. But, there is no proposed test method as a standard for mixed mode test for now. And RILEM three-point bend test procedure is complicate. Therefore, in this study, brazilian disks of various size were designed as the concrete with a similar specified concrete strength and maximum size of coarse aggregate($G_{max}$) were respectively 20mm and 40mm. And mode I fracture toughness of brazilian disks was compared with that of RILEM three-point bend test. As a result, it was suggested appropriate size(thickness, diameter) and notch length ratio of brazilan disk on the $G_{max}$. And it was verified that stress intensity factors for mixed mode can be easily calculated with the disk specimen. Stress intensity factors of a concrete brazilian disk were evaluated with finite element analysis and five terms approximation for comparison.

• Resources Recycling
• /
• v.6 no.3
• /
• pp.3-8
• /
• 1997

The EA.F. sleelmaking slag (slag that follow) of a cnmvany 1 Co.. containzd a simple substance of a metal, wustlte (FeO), magnetite (Fe,O,), gehlenite (CaAl,SiO,), monlicellite (CaMgSiO,), dc. To recovere a metal (Fe grade . t95%) in the slag, it is desirable that the particles of a metal are isolated from thc slag and madc for a liberated subslance. Then, the liberaled melal is easlly recoveled by a magnetic separation. If thc rcclarnalcd slag, the sizc of which ranges under 40 nun, have a mulli-stage crushing, the most of a metal in thc slag is simply isolaled as a liberated subslance. If the mad, lhat is a liberated subslance and a sphere, is recovered by a magnetic field intensity. the minimum intensity, at which a metal is attracted, is approximately IOOG and did no1 dcpcnd on the particle size of a metad in the same particles. TIe recovered material. that contdined a iron (Fe) over 95% is a metal which is crushed slag by l00G in the multi-stage. If the magnetic field intcns~ty increase, the recovery mcrcasc, but the concentration grade decrease Bewusc thc concentration eams more and more impurities, iron oxide and the coml~ound of alkali earth element. 'll~ercforc If the rccla~nated slag have the multi-stage crushing, the metal is almostly recovered in the crushed slag by lO0G on each particles. If the slag, used as a rcclamatian lhat is a amount of 350,000 tan from I Co., was undcr the multistage crushing and then separaled by 100gauss, it is possible to recova a metal approximately 2.500 Ion, lhat is 0.73% of n ~eclamated slag. in 304.7 mm particles and to recover 4.200 tan in 0.3-1.7 mm particles , that is 1.2% nf a rcclamated slag, in a year. Therefore, ihe told recoverable meld is 6,700 ton, that is 19% of a reclmated slag, in a year, too.

• Cross-Cultural Studies
• /
• v.30
• /
• pp.7-29
• /
• 2013

A movie which brought its material from a historical character or incidents in the past was produced by a story suggestion through a historical fact. It is because Shakespeare created a story based on a mythical element related with his life in the plot which was written from the script of the play and was on the show in the cinemas of London. It is an obvious fact that the historical drama of this movie was intentionally modified and the fictional story was added to episodes in order to create a dramatic effect. However, reflecting historical backgrounds and cultural aspects accurately through a historical study would also be an important factor. Therefore, the backgrounds and aspects presented in this movie are a kind of storytelling which was reconstructed as if a historian added his opinion to historical facts like a discourse. A historical background in was a story about Shakespeare who worked at the theater in London as a writer in 1593 the period of England Reneissance. The movie included the working and playwriting of Shakespeare who is a main character. This indicated not only the environment of the theater and literature during the reign of Queen Elizabeth I but also historical aspect in the early modern industrial society in England. This movie, that is, described that time as a recreation such as a cultural acceptance and an achievement of an initial capitalism in Renaissance in the life of characters. In particular, the factor of theaters flourishing during the Renaissance was because a newly emerging class, bourgeoisie, who held the capital emerging from a policy for middle class led to a box office hit through founding theaters and drama company and selling tickets and performing plays by themselves. Like this, the movie depicted the time led by plays to a industrialization. Moreover, Social aspects in the late 1500s were revealed in this movie through a depiction of the cinemas and the city of London. The depiction of the city of London reflected a social situation of an initial capitalism rapidly developed in trade and commerce. The social aspects such as conflicts between social classes based on getting richer and poorer, mammonism, a corrupted love between the male and the female, a immortality with growing brothels, religious and political conflicts with the foundation of the church in England were closely linked with characters' daily routine at that time in London and were reflected in this work overall. The reason why we highlight characters' job and custom like this in the movie is that these are ideationally inherent in a critical mind from people at that moment. The historical background and reproduction of the image depicted in the movie were focused on characters' daily routine and indicated the problem mentally and independently exposed in the form of initial capitalism.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.3
• /
• pp.222-227
• /
• 2008

Objective of this Research was to determine the influence of foliar application of $CaCl_2$ or $K_2SI_2O_5$ and soil application of $CaCO_3$ or $SiO_2$ on growth and cut flower quality of Zantedeschia aethiopica 'Wedding March'. To achieve this, $CaCl_2$ or $K_2SI_2O_5$ were applied at six leaf stage with the concentration of 0.05, 0.1 and 0.2% and $CaCO_3$ or $SiO_2$ were applied as basal fertilization with the amount of 100, 200, 400kg per 10a or 50, 100, 200, 400kg per 10a respectively. Plant material was used Zantedeschia aethiopica 'Wedding March'. Among calcium chloride($CaCl_2$) and calcium carbonate($CaCO_3$), calcium chloride foliar application was more effective than calcium carbonate with basal fertilization to growth of common calla 'Wedding March'. In the 0.1% solution foliar application of calcium chloride, plant height, leaf length and length of cut-flower was more longer than control. Length of leaf petiole was more longer and leaf fresh weight was more heavier than control. The degree of petiole hardness was more effective in the 0.1% solution calcium chloride foliar application than any other treatment. In the silicate fertilization treatment, plant height of 50kg per 10a treatment was most highest as 73.9cm. also its length of leaf petiole and leaf fresh weight was more effective than any other treatment. The hardness of petiole was better in the 50kg per 10a silicate fertilizer treatment. The cell shape of leaf petiole was round and tissue was regular in the treatment of 0.1% calcium chloride and 50kg per 10a silicate fertilizer but the cell of control was irregular round type. Macro element content of calcium was more amount in the treatment of silicate 50kg per 10a basal fertilization. The infected ratio of Erwinia was no relation with lime and silicate fertilizer treatment. Lime fertilizer treatment is effective for growth and flowering of Calla than silicate fertilizer and the suitable concentration was 0.1%.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1252-1257
• /
• 2011

Number of crop residues generated at large amount in agriculture can be utilized as substrate in methane production by anaerobic digestion. Greenhouse vegetable crop cultivation that adopting intensive agricultural system require the heating energy during winter season, meanwhile produce waste biomass source for the methane production. The purpose of this study was to investigate the methane production potential of greenhouse vegetable crop residues and to estimate material and energy yield in greenhouse system. Cucumber, tomato, and paprika as greenhouse vegetable crop were used in this study. Fallen fruit, leaf, and stem residues were collected at harvesting period from the farmhouses (Anseong, Gyeonggi, Korea) adopting an intensive greenhouse cultivation system. Also the amount of fallen vegetables and plant residues, and planting density of each vegetable crop were investigated. Chemical properties of vegetable waste biomass were determined, and theoretical methane potentials were calculated using Buswell's formula from the element analysis data. Also, BMP (Biochemical methane potential) assay was carried out for each vegetable waste biomass in mesophilic temperature ($38^{\circ}C$). Theoretical methane potential ($B_{th}$) and Ultimate methane potential ($B_u$) off stem, leaf, and fallen fruit in vegetable residues showed the range of $0.352{\sim}0.485Nm^3\;kg^{-1}VS_{added}$ and $0.136{\sim}0.354Nm^3\;kg^{-1}VS_{added}$ respectively. The biomass yields of residues of tomato, cucumber, and paprika were 28.3, 30.5, and $21.5Mg\;ha^{-1}$ respectively. The methane yields of tomato, cucumber, and paprika residues showed 645.0, 782.5, and $686.8Nm^3\;ha^{-1}$. Methane yield ($Nm^3\;ha^{-1}$) of crop residue may be highly influenced by biomass yield which is mainly affected by planting density.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.3
• /
• pp.10-21
• /
• 2021

Recently, the demand for atypical structures with functions and sculptural beauty is increasing in the construction industry. Existing mold-based structure production methods have many advantages, but building complex atypical structures represents limitations due to the cost and technical characteristics. Production methods using molding are suitable for mass production systems, but production cost, construction period, construction cost, and environmental pollution can occur in small quantity batch production. The recent trend in the construction industry calls for new construction methods of customized small quantity batch production methods that can produce various types of sophisticated structures. In addition to the economic effects of developing related technologies of 3D Concrete Printers (3DCP), it can enhance national image through the image of future technology, the international status of the construction civil engineering industry, self-reliance, and technology export. Until now, 3DCP technology has been carried out in producing and utilizing residential houses, structures, etc., on land or manufacturing on land and installing them underwater. The final purpose of this research project is to produce marine structures by directly printing various marine structures underwater with 3DCP equipment. Compared to current underwater structure construction techniques, constructing structures directly underwater using 3DCP equipment has the following advantages: 1) cost reduction effects: 2) reduction of construct time, 3) ease of manufacturing amorphous underwater structures, 4) disaster prevention effects. The core element technology of the 3DCP equipment is to extrude the transferred composite materials at a constant quantitative speed and control the printing flow of the materials smoothly while printing the output. In this study, the extruding module of the 3DCP equipment operates underwater while developing an extruding module that can control the printing flow of the material while extruding it at a constant quantitative speed and minimizing the external force that can occur during underwater printing. The research on the development of 3DCP equipment for printing concrete structures underwater and the preliminary experiment of printing concrete structures using high viscosity low-flow concrete composite materials is explained.

• Korean Journal of Food Science and Technology
• /
• v.53 no.6
• /
• pp.715-721
• /
• 2021

Cognitive impairment and Alzheimer's disease are serious social problems associated with the rising elderly population in Korea. 1,2,3,4,6-Penta-O-galloyl-β-ᴅ-glucopyranose (PGG) is a gallotannin isolated from medicinal plants such as Rhus chinensis. This study was performed to evaluate the effect of PGG on biomarkers related to cognitive function in human neuroblastoma SK-N-SH cells. Inhibition of acetylcholinesterase (AChE) activity is considered to be one of the main therapeutic strategies. PGG inhibited AChE activity in the test tube as well as in SK-N-SH cells. In addition, PGG induced protein and mRNA expression of brain-derived neurotrophic factor (BDNF), which is a mammalian neurotrophin that plays major roles in the development, maintenance, repair, and survival of neuronal populations. As one of the underlying molecular mechanisms that induce BDNF expression, PGG induced the activation of Ca²⁺/calmodulin (CaM)-dependent protein kinase II (CaMKII)-cAMP response element binding protein (CREB) pathway. In conclusion, PGG may be an useful material for improving cognitive function.

• The Journal of the Korea Contents Association
• /
• v.19 no.8
• /
• pp.332-344
• /
• 2019

Based on the life of the furniture is to reflect a region and the important basis of ideological and cultural characteristics of The Times culture form the traditional concept of directly determine the style and features of furniture. Due to the geographical location, China and the Korean peninsula have a long history of cultural exchanges. Through long-term exchanges, Chinese traditional culture has penetrated into the daily life of the ancestors of the Korean peninsula in various ways. As one of the traditional Chinese cultures, Taoism began to spread in The Three Kingdoms period on the Korean peninsula. With the integration and development of Taoism on the Korean peninsula, Taoism culture with unique characteristics of the peninsula was formed and became part of the traditional ideological and cultural life of the ancestors on the peninsula. In the historical development of furniture on the Korean peninsula, Taoist theories such as yin-yang theory and five-element theory and geomantic geography theory have exerted an important influence on the use, shape, material and pattern of traditional furniture on the Korean peninsula. The late period of the joseon dynasty was the heyday of the handicraft industry on the Korean peninsula. During this period, the categories of furniture increased, and a large number of furniture with distinctive Taoist characteristics, beautiful shape, excellent design and different uses appeared. Through the study on the modeling, materials, patterns, seals and designs of furniture in the late period of joseon dynasty, this study confirms that Taoist thoughts are one of the main factors affecting the development of Korean traditional furniture forms and patterns. Using patterns of various natural objects or plants and animals for furniture design, it is to pray for family members to avoid disasters and disasters. Thus it can be seen that praying for blessings from heaven is the main Taoist thought.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.76-82
• /
• 2019

This study has done to search for a solution to remove risk limitedly caused by separating weapon system acquisition from operation and maintenance at the view point of Logistic Commander who's responsible for stable operation and maintenance after acquiring weapon system. At the System development stage, unverified overhaul development plan may cause additional manpower and costs after the development, and furthermore it is likely to have risk to lower reliability of the military. Thus, research and development agency should write overhaul development plan at the System development stage, and it should be verified through evaluation and verification test. Secondly, during research and development, institutional supplementation is needed to calculate human and material resources writing overhaul development plan. Thirdly, it should be able to analyze proper operation & maintenance plan and cost for overhaul plan at the pre-investigation stage. Fourthly, the base which can develop overhaul concept and overhaul factors should be included in the need and need determination document. Lastly, for the weapon system which has small amount of high power figure, project management should be performed to be able to specify at the each acquisition level of weapon system to realize Article 28, clause 3 and 4 of Defense business law.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.517-524
• /
• 2019

The overdrive hub clutch is attached to a 6-speed automatic transmission to reduce fuel consumption by using the additional power of the engine. This paper proposes a means to minimize the load and roll-over ratio on the punch during the piercing process for the overdrive hub clutch product. Die clearance, shear angle, and friction coefficient, which can affect the load and roll-over ratio of the punch during processing, were set as the design variables. Sensitivity analysis was also conducted to determine the influence of each design variable on the punch load and roll-over ratio. As a result, shear angle, friction coefficient and die clearance were found to be sensitive to load and roll-over ratio. The punch load and roll-over ratio were set as the objective function and the equation of each design variable and objective function was derives using the Response Surface Method. Finally, the optimal value of the design variables was derived using the Response Surface Method. Application of this model to finite element analysis resulted in 22.14% improvement in the roll-over ratio of the punch load and material.