• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1418-1420
• /
• 2008

In this paper, the light emitting efficiency, spectrum, and the lifetime of the phosphorescent devices, whose emission characteristics are strongly dominated not only by the energy transfer but also by the charge carrier trapping induced by the emissive dopant, are explained by differences in the energy levels of the host, dopant, and nearby transport layers. On the basis of our finding on device performance and photocurrent measurement data by time-of-flight (TOF), we investigated the effect of the difference of carrier trapping dopant and properties of the host materials on the efficiency roll-off of phosphorescent organic light emitting diode (OLED), along with a physical interpretation and practical design scheme, such as a multiple host system, for improving the efficiency and lifetime of devices.

• Current Photovoltaic Research
• /
• v.12 no.1
• /
• pp.6-16
• /
• 2024

The efficiency of silicon solar cells is approaching a theoretical limit referred to as 'the state of the art'. Consequently, maintaining efficiency is more productive than pursuing improvements the last room for limiting efficiency. One of the primary considerations in silicon module conservation is the occurrence of failures and degradation. Degradation can be mitigated during the cell manufacturing stage, unlike physical and spontaneous failure. It is mostly because the chemical reaction is triggered by the carrier generation of thermal and light injection, an inherent aspect of the solar cell environment. Therefore, numerous researchers and cell manufacturers are engaged in implementing mitigation strategies based on the physical degradation mechanism.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.1
• /
• pp.21-27
• /
• 2005

This study was conducted to evaluate the biofiltration treatment characteristic for benzene vapor gas. Compost and calcium silicate porous material were used as biofilter fillers. Gas velocity and empty bed retention time were 15 m/hr and 4 min, respectively. Benzene gas removal efficiency of P-Bio (calcium silicate porous material with inoculation) was the highest and maintained in over 98%. After shock input of benzene gas, the removal efficiency of P-Bio biofilter was recovered within 2 days, while 5 days were taken in CP-Bio (compost + calcium silicate porous material mixture with inoculation) and CP (compost + calcium silicate porous material mixture without inoculation) biofilters. The removal efficiency of P-Bio biofilter was near 100% in the loading rate of <$85g/m^3$(filling material)/hr, It was shown that the maximum elimination capacities of P-Bio, CP-Bio, and CP biofilters were 95, 69, and $66\;g/m^3$(filling material)/hr, respectively. Microbial number of P-Bio, which the number was the lowest at start-up, was 3 orders increased on operational day 48. $CO_2$ was generated greatly in order of P-Bio, CP-Bio, and CP biofilters.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05a
• /
• pp.27-31
• /
• 2001

We fabricated organic electroluminescent(EL) devices with mixed emitting layer of poly(N-vinylcarbazole)(PVK), 2,5-bis(5'-tert-butyl-2-benzoxazoly)thiophene(BBOT), N,N'-diphenyl-N,N'-(3-methyphenyl)-1,1'-biphenyl-4, 4'-diarnine(TPD) and poly(3-hexylthiophene)(P3HT). To improve the external quantum efficiency of EL devices, we added the functional layer to the devices such as LiF insulating layer, carrier confinement layer(BBOT) and hole injection layer(CuPc). In the ITO/emitting layer/Al device, the maximum quantum efficiency at 15V was $1.88{\times}10^{-5}%$. And then, it is increased by a factor of 27 to $5.2{\times}10^{-3}%$ in ITO/CuPc/emitting layer/BBOT/LiF/Al device at 15V.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.414-414
• /
• 2009

나노스피어 리소그래피는 기존의 리소그래피 방법에 비해 나노 크기 패턴을 제작하는데 공정이 간단하며 재현성있게 대면적에 패터닝이 가능하다는 장점이 있다. 본 연구에서는 Vertical LED(V-LED)의 External quantum efficiency 향상을 위하여 나노스피어 리소그래 피를 이용하여 V-LED의 n-GaN 표면을 패터닝을 하였다. n-GaN 위에 Sputter를 이용하여 $SiO_2$를 증착 후 나노스피어를 스핀 코팅을 이용하여 단일막을 형성하였다. 그 후, 반응성 이온 식각 장치를 이용하여 나노스피어의 크기를 조절하고 $SiO_2$층을 식각하였다. 다음과 같은 공정 후 $SiO_2$층을 Mask층으로 하여 n-GaN 표면을 식각하였다. 실험 결과 나노스피어 리소그래피를 이용하여 V-LED의 External quantum efficiency 향상을 위한 n-GaN 표면의 패턴 제작이 가능함을 확인할 수 있었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.523-526
• /
• 2001

In this paper, we design and fabricate the high-efficiency and low-power switched-capacitor DC-DC converter. This converter consists of internal oscillator, output driver and output switches. The internal oscillator has 100kHz oscillation frequency and the output switches composed of one pMOS transistor and three nMOS transistors. According to the configuration of two external capacitors, the converter has three functions that are the Inverter, Doubler and Divider. The proposed converter is fabricated through the 0.8$\mu\textrm{m}$ 2-poly, 2-metal CMOS process. The simulation and experimental result for fabricated IC show that the proposed converter has the voltage conversion efficiency of 98% and power efficiency more than 95%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.1054-1056
• /
• 2002

High temperature Kermal diffusion from $POCl_3$ source usually used for conventional process through put of a cell manufacturing line and potentially reduce cell efficiency through bulk like time degradation. To fabricate high efficiency solar cells with minimal thermal processing, spin-on-doping(SOD) technique can be employed to emitter diffusion of a silicon solar cell. A technique is presented to emitter doping of a mono-crystalline solar cell using spin-on doping (SOD). Moreover it is shown that the sheet resistance variation with RTA temperature and time fer mono-crystalline and multi-crystalline silicon samples. This novel SOD technique was successfully used to produces 11.3% efficiency l04mm by 104mm size mono-crystalline silicon solar cells.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1058-1061
• /
• 2003

In this thesis, we observed the optical characteristic of amorphous chalcogenide thin films by He-Cd laser. Also, grating formation by He-Ne laser and He-Cd laser. After analyze diffraction efficiency of the time on the $Ag(200{\AA})/As_{40}Ge_{10}Se_{15}S_{35}$ thin films. The result diffraction efficiency of Maximun 0.2% reduced according to time grating formation by He-Ne laser. Diffraction efficiency of Maximun 0.1% showed stabiliy characteristic according to time grating formation by He-Cd laser.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.5
• /
• pp.403-407
• /
• 2010

This paper shows that the diffraction efficiency is influenced by superadditivity for the combination of the different developing agent and concentrations in the reversal bleach applied to the Slavich PFG-01 plate to be used for recording transmission holograms. The four developers based on ascorbic acid in combination with metol, phenidone, hydroquinone respectively, were studied. In diffraction efficiency aspect, the superadditivity effect of mixture of two developing agents is lower than one developing agent developer, AAC in the reversal bleach.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.351-352
• /
• 2008

A new high efficient red PhOLED using a host of $Bebq_2$ and double dopants of $(pq)_2$Ir(acac) and SEC-R411 have been fabricated and evaluated. The device doubly doped with $(pq)_2$Ir(acac) and SFC-R411 showed the current efficiency improvement of 22% under a luminance of 10000 cd/$m^2$ in comparision with the device singly doped with SFC-R411. The luminance, current efficiency and central wavelength of the doubly doped device were 9300 cd/$m^2$ at 7V, 11.1 cd/A under a luminance of 10000 cd/$m^2$ and 625 nm, respectively.