• 한국실내디자인학회논문집
• /
• 제21권3호
• /
• pp.22-30
• /
• 2012

Nowadays the issue of environmental pollution and ecological destruction is not a simple issue but an important issue to be continuously considered. It is deemed that a study for recycled new materials is immediately required and this study is to analyze features and processing methods of new materials which can be used to interior space. We found the recycled new materials used for space through researching various web sits. And then we analyzed what the base materials are and classified that base materials are whether natural or artificial of the recycled materials. We classified processing methods of the recycled new materials after researching general processing methods. The result of this study would be an important material to the research and development of new finishing materials with consideration of environment and to the research for a guideline of applicable new materials. The results of this study are as follows : First, we could classify widely 2 categories into natural material and artificial material and then 10 subcategories into metal, glass, wood, rubber, stone, plastic, leather or fabric, ceramic, concrete and so on, and analyzed that which material is mostly used and whether it is single material or multiple material. In order to analyze the feature of processing method. Second, we could classify into 4 categories such as junction, surface process, molding, and insert, and found out which processing method is applied based on objects of research. Third, as an analysis result of the recycled new material feature, in order to develop various new materials, it is required to study on combination and application of 2 materials or more rather than single material. Four, as a analysis result of the processing method feature, I would like to suggest that development and application of various processing methods are required. Especially, it is necessary to grope for a way to develop new functional materials for interior space through a systemic research and analysis of processing method of other fields. Furthermore, a way to reuse recycled new materials should be considered in a stage of selection and application of processing method.

• Structural Engineering and Mechanics
• /
• 제72권2호
• /
• pp.245-256
• /
• 2019

The experimentally determined mechanical behavior of the material under the prescribed service conditions is the basis of advanced engineering optimum design. To allow experimental data on the behavior of the material considered, uniaxial stress tests were made. The aforementioned tests have enabled the determination of mechanical properties of material at different temperatures, then, the material's resistance to creep at various temperatures and stress levels, and finally, insight into the uniaxial high cyclic fatigue of the material under different applied stresses for prescribed stress ratio. Based on fatigue tests, using modified staircase method, fatigue limit was determined. All these data contributes the reliability of the use of material in mechanical structures. Data representing mechanical properties are shown in the form of engineering stress-strain diagrams; creep behavior is displayed in the form of creep curves while fatigue of the material is presented in the form of S-N (maximum applied stress versus number of the cycles to failure) curve. Material under consideration was 18CrNi8 (1.5920) steel. Ultimate tensile strength and yield strength at room temperature and at temperature of $600^{\circ}C$: [${\sigma}_{m,20/600}=(613/156)MPa$; ${\sigma}_{0.2,20/600}=(458/141)MPa$], as well as endurance (fatigue) limit at room temperature and stress ratio of R = -1 : (${\sigma}_{f,20,R=-1}=285.1MPa$).

• 한국의류학회지
• /
• 제35권3호
• /
• pp.325-335
• /
• 2011

This study analyzes the current educational curricula in the field of Clothing and Textiles in order to develop appropriate educational methods and courses. We reviewed the curricula offered by 58 Clothing and Textiles Departments at four-year universities in Korea. We analyzed the educational content of each curriculum by dividing all of the courses offered into eight categories. The analysis was based on the information posted on the universities' Internet websites, and the analysis was performed by using descriptive statistics. The results of this study are as follows: First, the educational courses of the Clothing and Textiles Departments are composed of, 36.2% design, 20.4% production, and 14.5% textile categories. In comparison with the results of a similar study conducted in 1999, emphases on the design, distribution, and marketing categories have increased, while the emphases on the production, apparel material, basic knowledge, and consumption science categories have decreased. Second, in the case of the apparel material category, basic knowledge of materials constituted 18.5%, the largest part of the category. The average number of units offered in the area of apparel materials by the 58 Departments was 17 units per year. The curricula were found to vary by regions of the country. The universities located in the Chungcheong region offer more textile material courses, but the universities in the Capital region offer fewer textile material courses than other regions. Departments that are affiliated with universities that emphasize Art and Design have more courses on basic knowledge, dyeing and finishing, and fabric design than other universities.

• 한국전산구조공학회논문집
• /
• 제35권2호
• /
• pp.65-71
• /
• 2022

최근에는 경량화 문제에 대한 합리적인 솔루션을 제공하고 유용한 개념설계를 제공할 수 있는 다중 재료 구조 위상최적화가 더욱 중요해지고 있다. 기존의 MMTO(Multi-Material Topology Optimization)의 경우 후보 물질의 수가 증가할수록 설계변수의 수도 증가하고, 결과적으로 계산 시간이 크게 증가한다. 따라서 PSM(Phase Section Method)과 같은 단일 설계변수를 갖는 MMTO가 제안되었다. 본 연구는 조성비가 면적이나 부피비를 나타내지 못하고, 설계변수가 목표치에 충분히 집중되지 않고, 특정 재료가 요구량보다 적게 생성되는 PSM의 세 가지 주요 제한점을 고려하여 이를 개선하는데 중점을 둔다. 이러한 한계를 극복하기 위해 재정의된 조성비와 더 나은 수렴을 위한 조정된 매개변수를 제안한다. 제안된 수정 사항의 유효성을 2차원 및 3차원 수치 예제를 통해 검증한다.

• 한국전산구조공학회논문집
• /
• 제35권6호
• /
• pp.351-356
• /
• 2022

본 논문에서는 3차원 엮임 재료의 유체투과율 향상을 목적으로 수치해석 데이터 기반의 물성치 회귀 분석 및 최적설계를 소개한다. 우선 3차원 엮임 재료를 구성하는 와이어 사이의 간격을 결정하는 배율 계수를 매개변수화 하여 다양한 배율 조합을 가지는 수치 모델을 생성하였고, 전산 수치해석을 통해 계산된 각 모델의 체적 탄성계수, 열전도 계수, 유체투과율 데이터를 이용하여 다항식 기반의 회귀 분석을 수행하였다. 이를 사용해서 체적 탄성계수와 유체투과율 사이의 다목적함수 최적설계를 통한 파레토 최적해를 도출하였으며, 두 물성치가 서로 상충 관계에 있음을 확인하였다. 한편 3차원 엮임 재료의 열전달 효율을 높이기 위해서 유체투과율을 최대화 시키는 것을 목적으로 경사도 기반 최적설계를 수행하였고, 제약조건인 체적 탄성계수의 크기별 유체투과율의 변화율을 분석하였다. 그 결과 설계자가 원하는 최소한의 강성을 가지는 최대 유체투과율 설계 모델을 얻어낼 수 있음을 확인하였으며, 회귀 방정식을 통해서 얻어진 설계가 높은 정확도를 가지고 있음을 추가적으로 검증하였다.

• 대한기계학회논문집A
• /
• 제28권6호
• /
• pp.726-731
• /
• 2004

This paper suggests a material mixing method to mix several materials in a structure. This method is based on ESO(Evolutionary Structural Optimization), which has been used to optimize topology of only one material structure. In this study, two criterions for material transformation and element removal are implemented for mixing several materials in a structure. Optimal topology for a multiple material structure can be obtained through repetitive application of the two criterions at each iteration. Two practical design examples of a short cantilever are presented to illustrate validity of the suggested material mixing method. It is found that the suggested method works very well and a multiple material structure has more stiffness than one material structure has under the same mass.

• 대한기계학회논문집A
• /
• 제29권1호
• /
• pp.22-29
• /
• 2005

A material cloud method, which is a new topology optimization method, is presented. In MCM, an optimal structure can be found out by manipulating sizes and positions of material clouds, which are lumps of material with specified properties. A numerical analysis for a specific distribution of material clouds is carried out using fixed background finite element mesh. Optimal material distribution can be element-wisely extracted from material clouds' distribution. In MCM, an expansion-reduction procedure of design domain for finding out better optimal solution can be naturally realized. Also the convergence of material distribution is faster and well-defined material distribution with fewer intermediate densities can be obtained. In addition, the control of minimum-member sizes in the material distribution can be realized to some extent. In this paper, basic concept of MCM is introduced, and formulation and optimization results of MCM are compared with those of the traditional density distribution method(DDM).

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.17-22
• /
• 2002

A conventional silica gel/water adsorption chiller has been analyzed numerically. A novel non-dimensional mathematical model has been presented to analyze the design effect of different components of an adsorption chiller. The design parameters of this system are characterized by the number of transfer unit, NTU, of different components and the inert material alpha number, ${\alpha}$of different components of the systems. Results show that condenser NTU$\sub$a/ has the most influential effect on the system performance, which is fellowed by absorber NTU$\sub$e/. It is also seen that coefficient of performance (COP) and non-dimensional specific cooling capacity increases with the increase of NTU$\sub$a/ and NTU$\sub$e/, but decreases with the increase of inert material alpha number. A thermo-economic data of the adsorption chiller and some other heat pump systems those are in practical operation are also presented.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.938-941
• /
• 2006

We present a new design method of one-dimensional multi-layered acoustic foams for transmission loss maximization by topology optimization. Multi-layered acoustic foam sequences consisting of acoustic air layers and poroelastic material layers are designed for target frequency values. For successful topology optimization design of multi-layered acoustic foams, the material interpolation concept of topology optimization is adopted. In doing so, an acoustic air layer is modeled as a limiting poroelastic material layer; acoustic air and poroelastic material are handled by a single set of governing equations based on Biot's theory. For efficient analysis of a specific multi-layered foam appearing during optimization, we do not solve the differential equations directly, but we use an efficient transfer matrix approach which can be derived from Biot's theory. Through some numerical case studies, the proposed design method for finding optimal multi-layer sequencing is validated.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2003년도 춘계학술발표대회 논문집
• /
• pp.170-173
• /
• 2003

Because effect about environmental effect that get to human visually is absolute, ability that mural of subway interior considers relation with space is required. Also, public environment element should be designed must intend agreeableness sex by same traitor effect of quality of the material and color and can be evaluated by cultural inheritance that is powerful enemy same time. Wish to accomplish access as meaning of city environment improvement of wall of subway station or underground space etc. through Japan course South Korea's illustration regarding environment landscaping features that is designed in wall of latest domestic building subway interior in this research. Various and new reading by that study and analyze manufactured wall environment landscaping features recently that could find and was approached in variouser technique, practical use of material than single material and is expressed according to history's special quality and planning know can. Underground space can give agreeableness feel and psychological sense of security by user though expression method, material, color plan etc. consist because is having image blockade enemy. Therefore, wall environment landscaping features of underground space to be cultural value and environment Dija because diversified research that is accompanied in element is gone subway interior space of our country and underground space etc. as new culture space develop be able to must.