• The Journal of Advanced Prosthodontics
• /
• 제13권1호
• /
• pp.36-45
• /
• 2021

Purpose. To investigate the fracture resistance of monolithic CAD-CAM all-ceramic surveyed crowns with two different occlusal rest seat designs. Materials and Methods. Two maxillary first premolar were prepared for all-ceramic surveyed crowns with wide (2/3rd of buccolingual width of an unprepared tooth) or narrow (1/3rd of buccolingual width of an unprepared tooth) disto-occlusal rest seat (ORS) designs. Eighty monolithic CAD-CAM all-ceramic surveyed crowns were prepared and divided into 4 groups - Group CR, Composite resin material as a control; Group LDS, Lithium disilicate based material; Group ZIPS, zirconia-material (IPS ZirCAD); and Group ZLHT, zirconia- material (CeramillZolidht+). Crowns were cemented on an epoxy resin die with adhesive resin cement. The fracture resistance of crowns was tested with the universal machine. Univariate regression analysis was used. Results. The mean ± standard deviation of maximum failure force values varied from 3476.10 ± 285.97 N for the narrow ORS subgroup of group ZIPS to 687.89 ± 167.63 N for the wide ORS subgroup of group CR. The mean ± standard deviation of maximum force was 1075 ± 77.0 N for group CR, 1309.3 ± 283.9 N for group LDS, 3476.1 ± 285.97 N for group ZIPS, and 2666.7 ± 228.21 N for group ZLHT, with narrow occlusal rest seat design. The results of the intergroup comparison showed significant differences in fracture strength with various material groups and occlusal rest seat designs (P<.001). Conclusion. The zirconia-based all-ceramic surveyed crowns fractured at more than double the load of Lithium disilicate based crowns. The crowns with narrow base occlusal rest seat design had statistically significantly higher fracture resistance than surveyed crowns with wide occlusal rest seat design. The use of narrow occlusal rest seat design in CAD-CAM all ceramic surveyed crowns provides higher fracture resistance, and therefore narrow occlusal rest design can be used for providing esthetics with high strength.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.985-990
• /
• 2002

Contemporary architecture calls for a wide range of surface textures and treatments. A surface compatible with the architect's design may vary from a glass-smooth finish to one requiring special sculptured ornamentation. These surfaces require many different types of form sheathing and lining. The purpose of study development new design form and made elaborateness shape. Easy to used in field that architecture finish material not used expect effective reduce of working hours, personnel expenses, architecture finish material, cost. After this, building wall apply a variety shape in concrete surface.

• 대한전기학회논문지
• /
• 제39권8호
• /
• pp.813-819
• /
• 1990

In this paper, a new design method for superconducting pulse magnet is presented. Given energy storage capacity, magnet shape parameters are determined to minimize superconducting material quantity. Once the shape parameters are determined, cooling channel is designed and degradation characteristics are confirmed. According to the proposed magnet design concept, relatively uniform and low field distribution is obtained. Therefore, both the quantity of superconducting material and the mechanical load over magnet are reduced.

• 전기의세계
• /
• 제19권2호
• /
• pp.12-17
• /
• 1970

In the design of electrical equipment insulation, it is customary to place pressboard and other insulating material at right angle to the electrical discharge path, which is based on the insulation tests performed on equipment under various conditions such as types of insulation, applied voltage and other unique situations. Since electrical equipment manufacturing started only recently, there is a scarcity of available data on insulation problems, which make it difficult for the design engineers. The author untook this study to provide such analytical design data for various conditions based on the experiment conducted on the equipment being manufactured, thus reducing possible errors in the process.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.573-578
• /
• 2003

Contemporary architecture calls for a wide range of surface textures and treatments. A surface compatible with the architect's design may vary from a glass-smooth finish to one requiring special sculptured ornamentation. These surfaces require many different types of form sheathing and lining. The purpose of study development new design form and made elaborateness shape. Easy to used in field that architecture finish material not used expect effective reduce of working hours, personnel expenses, architecture finish material, cost. After this, building wall apply a variety shape in concrete surface

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.153-157
• /
• 1997

This paper presents a patch antenna design method using microwave dielectric ceramic substrate. Before manufactirung the GPS(Global Positioning System)antenna such contents as input impedence resonent frequency and quality factor and efficiency are surveyed theolitically for design and parameters for manufacturing the antenna are found.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.128-131
• /
• 2000

The main objective of this paper is to design and test a new type of polymer ZnO surge arrester for DC power system of railroad vehicles. The rated voltage is 1500V direct current. The main research works are focused on structure design by finite element method, rating voltage, temporary over voltage and studies of characteristics of polymeric surge arrester.

• 패션비즈니스
• /
• 제24권5호
• /
• pp.125-139
• /
• 2020

The fashion industry that perceived the severity of environmental pollution, has sought various methods of sustainable fashion. However, most of the businesses paid attention to the development of materials using industrial waste, or vegan material. Thus, this study aims to present the methods for improvement in creativity for inversely developing the design from patterns and present new approaches by applying the contrarian development of proto to class under the limited condition of material concerning general design, selection of material, and production of sample. In the case of three student teams enrolled in the first semester of the second year, the fabric and used clothing donated by industry were used as material. The whole cut for cutting a single fabric in connected state, and Zero Wastes Design within a rectangular frame of fabric, upcycling of used clothes, and cutting out of Geometric Form are suggested. The team(A) produced a zero-wastes coat and whole-cut Pancho that could be variously represented. The team(B) produced two kinds of asymmetric dress by utilizing used check-patterned shirts through upcycling. The team(C) utilized the fabric in geometric forms such as rectangle, trapezoid, and atypical figure by drawing design within donated fabrics. The items were a dress, blouse, and skirt. Consequently, an opportunity for both academia and industry to present more concrete methods for sustainable fashion and deeply perceive the sustainable fashion is presented along with novel methods for creation by carrying out the composition of pattern and design at the same time.

• 한국의상디자인학회지
• /
• 제18권3호
• /
• pp.245-260
• /
• 2016

This study explored cases of 3D printing utilization in domestic and overseas fashion industries, and presented utilization strategies for fashion design departments in universities in future by grasping characteristics of newly appearing distribution types through 3D printing. Cases of producing costumes using 3D printing in fashion industry comprised a bikini using the material of Nylon12 that continuum fashion demonstrated, innovative 3D costumes by Iris Van Herpen, Tweed Suit using the material that Chanel manufactured with 3D printing technology, but they were limited to experimental fashion works due to limitations of 3D printer material and printing size. On the other hand, in fashion accessories, with jewelry and shoes at the head of the list, MCM and Kipling also demonstrated bags using this technology, and Elvis Pompilio and Gabriela Ligenza demonstrated 3D printing hat products as well. Except the above, as in glasses and neckties utilizing 3D printing, owing to reduced limitations of time, size and material, 3D printing was found to be utilized in fashion accessories other than costumes. Recently there has been a new consumption and distribution structure coming up focusing on 3D printing technology. That is, in overseas countries, content platforms sharing products modeled by oneself has rapidly appeared, and in our country as well, funnypoly, a 3D content platform appeared in 2015. The appearance of these new types of distribution structures means that the common people can produce design contents, and we believe that it may bring about a change in the traditional way of distribution structure. To walk in step with this change, it is believed that it is necessary for fashion design departments to raise college faculty members who can educate 3D printing, develop curriculum to educate 3D printing, and develop experiential programs connected with middle and high schools.

• 대한공업교육학회지
• /
• 제43권1호
• /
• pp.1-19
• /
• 2018

최근 건설 분야에서 BIM 설계 기술이 의무 적용됨에 따라 실무 현장이나 대학의 건축설계 교육은 3D 모델링 중심으로 크게 변화하고 있다. 그러나 건설 분야 특성화 고등학교에서의 건축설계 교육은 수제도와 2D CAD 중심으로 구성되어 그 변화에 적절하게 대응하지 못하고 있다. 학생들에게는 새로운 건축 설계 흐름에 부합하는 3D 모델링 설계능력을 필수적으로 갖추어야 함에도 불구하고 이를 충족할 수 있는 3D 주택설계 수업자료가 매우 부족한 실정이다. 이 연구는 특성화 고등학교 전문제도 과목을 위한 BIM 기반의 3D 주택설계 수업 자료를 개발하고, 특성화고 학생들에게 적용하여 학생들의 흥미도와 주택설계 과제수행능력이 얼마나 향상되는지를 분석하기 위한 연구이다. 이 연구에 사용되는 3D 주택설계 수업자료는 PDIE 모형 절차에 따라 준비, 개발, 실행, 평가의 4단계를 거쳐 개발하였으며, 가설 검증을 위한 실험설계 모형은 이질통제집단 전후검사설계를 사용하였다. 실험설계 모형에 따라 실험 집단에는 BIM 기반의 3D 주택설계 수업자료를 적용하여 수업을 실시하였으며, 통제 집단에는 2D CAD 기반의 일반적인 주택설계 수업자료로 수업을 실시하였다. 실험 처치는 건설 분야 특성화 고등학교 학생들을 대상으로 실시하였고, 총 12차시의 전문제도 교과 수업에 적용하였다. 실험 처치의 전과 후에는 각각 흥미도와 주택설계 과제수행능력에 대한 검사를 실시하였으며, 검사결과를 바탕으로 독립표본 t-검정을 통해 3D 주택설계 수업자료에 대한 효과를 분석하였다. 이 연구에서 개발된 BIM 기반의 3D 주택설계 수업자료는 학생들의 수업 흥미도를 향상시키는데 효과적이었으며, 기존 2D 기반의 주택설계 수업보다 과제수행능력을 향상시키는 것으로 나타났다.