• 대한소아치과학회지
• /
• 제26권2호
• /
• pp.339-349
• /
• 1999

본 연구에서는 수복에 따른 치질 내부 구조물의 열적변화를 평가하기 위하여 와동이 형성된 인공 치아모형에 아말감충전, 아말감과 스테인레스 스틸관 수복, 금인레이와 금관수복, ZOE 이장 및 아말감충전 등으로 수복한 후 온도변화를 관찰하였다. 각 실험군에 $4^{\circ}C$와 $60^{\circ}C$로 2초와 4초 동안 자극을 가한 후 치아내부의 온도분포를 2차원적으로 분석하였고, 치수 중앙부에서 외측으로 층을 형성하여 3차원적인 해석을 시행한 결과, 다음과 같은 결론을 얻었다. 1. $4^{\circ}C$의 자극이 2초간 가해진 아말감 충전 경우, 아말감 충전과 스테인레스 스틸관을 장착한 경우에서는 $1^{\circ}C$ 내외의 차이를 보였으며, 치수와 상아질 경계면에서 3초 경과시에 $29^{\circ}C$까지 급격한 온도 하강을 보였으며 9초 후에 $25^{\circ}C$에 도달하였다. 또한 금으로 수복한 경우에서는 3초 후 $25^{\circ}C$까지 하강하여 그 온도를 유지하였으며, ZOE 이장 경우에서는 최저온도가 $4^{\circ}C$ 이상 높게 나타났다. 2. $4^{\circ}C$ 자극을 4초간 가한 경우에서는 9초 후에서 2초 자극시보다 $2-3^{\circ}C$ 낮았으며, 금 수복 경우에는 5초 후에 $21^{\circ}C$의 최저온도를 보인 후 점차 회복되었다. 3. 아말감 충전 및 스테인레스 스틸관을 같이 장착한 경우에 $60^{\circ}C$, 2초간 자극에는 3초 후 $40^{\circ}C$의 온도로서 상승하였으나 9초 후에 $30^{\circ}C$로 하강 하였으며, 금 수복에서는 2초 후 $41^{\circ}C$까지 온도가 상승하였고, 9초 후 $28^{\circ}C$를 보여 $13^{\circ}C$의 차이가 있었다. ZOE 이장 경우에는 온도차이가 $5^{\circ}C$로서 안정된 양상을 보였다. 4. $60^{\circ}C$, 4초 자극에 대한 아말감 충전 및 스테인레스 스틸관을 같이 장착한 경우에서 5초 후 $42^{\circ}C$, 9초 후 $35^{\circ}C$를 보였으나 금 수복 경우에서는 3초 후 $49^{\circ}C$, 9초 후 $31^{\circ}C$의 온도변화를 나타내었다. 5. 3차원 분석에서 치수 중앙부에서 멀어질수록 온도변화가 심하였다.

• 헤리티지:역사와 과학
• /
• 제49권2호
• /
• pp.86-103
• /
• 2016

조선후기 문신 한필교(1807~1878년)가 관직을 역임했던 읍치를 대상으로 제작한 "숙천제아도(宿踐諸衙圖)" 화첩의 평안도 영유현과 황해도 신천군 읍치를 분석 자료로 활용하여 실증사료로서의 가치추적, 공간구조 등의 전형성 정립, 관아조경 및 문화경관 특성 도출 등을 시도한 연구결과는 다음과 같다. '풍수형국도' 성격을 겸하며 사방전도묘법으로 그려진 "숙천제아도"의 읍치도는 조선시대 지방고을의 터잡기와 공간구조는 물론 환경설계원칙 등을 파악할 수 있는 사료적 가치를 지닌다. 고을 치소(邑治)는 남북 중심축선에 위계를 설정한 배산임수 체계이며, 전조후침(前朝後寢)의 관아시설, 그리고 3단1묘의 제례처 등 도성에 준한 토지이용과 배치규범을 적용하고 있다. 교통요충지에 자리한 고을 치소는 어귀 장터마당을 결절점으로 안길을 따라 북쪽으로 향하면 관아 문루에 다다르는 노단경이 형성되고, 고갯길 또는 물길을 따라 외부 바깥길로 이어지는 체계를 갖는다. 즉, 동선체계는 바깥길-고갯길-어귀길-장터마당-안길-또는 샛길로 수용력과 위계에 따라 분절되며 3거리 길로 접합되는 양상이다. 지방관아의 토지이용은 3조(三朝)의 개념(외조, 치조, 연조)을 반영한 위계적 구성인데, 동헌의 후원과 객사의 별원을 포함하여 3문3조2원(三門三朝二園)의 공간체계를 보여준다. 고을의 뒷동산 소나무 숲, 명당수인 남천, 안산(案山)에 해당하는 조산(造山), 비보숲 읍수(邑藪) 등 풍수적 경관짜임이 작용되었는데, 겨울철 북서풍 차단과 여름철 상승기류 형성 등 에너지 보존, 색체 항상성, 자연재해 방지와 심리적 안정성 등 쾌적성 조건에 부합되는 환경지속성이 추출된다. 한적한 곳에 자리한 향교는 별도의 원림을 가꾸지 않았으며, 누정은 심신수양, 안분지족, 자연회귀 같은 상징적 가치, 정치적 행사와 윤리관 반영, 유흥상경 등 문화경관 양상이 다양하게 표출되는데, 객사에는 기와를 얹은 와정(瓦亭)이, 동헌과 내아에는 네모꼴 연못을 두고 소박한 모정(茅亭)이 도입되는 차별성을 보여준다. 관아에 지표경관으로 문루가 자리하고, 군사훈련 및 심신수양을 겸한 사정(射亭)이 필수시설로 도입되었다. 아사의 앞뜰은 네모꼴 마당(庭)으로 조경처리를 하지 않은 반면, 정청의 뒤뜰(後園)과 객사의 별원(別園) 등은 장식적으로 가꾸었다. 이러한 관아조경은 공간 성격 및 위계를 반영하되 기능적 지속성(차폐와 방화, 미기후조절 등)과 심리적 건전성, 상징성 등을 복합적으로 고려한 경관미학이라 하겠다. 한편, 소나무, 느티나무, 배나무, 버드나무, 향나무(또는 노송), 연(蓮), 화목(花木) 등이 조경식물로 활용되었는데, 환경심리적 가치가 부가된 배후숲, 조산숲과 비보숲 등과 함께 건전한 문화경관 요소로 자리매김하고 있다. 이러한 분석결과를 일반화 시킬 수 있느냐 하는 문제는 조선시대 읍치의 공간구조 및 환경설계 원칙이 제도적 틀 안에서 정형성으로 작용되고 있어 연구의 한계를 극복할 수 있으리라 판단된다.

• 한국조경학회지
• /
• 제43권3호
• /
• pp.77-91
• /
• 2015

본 연구는 대규모 매립지에 조성된 인천국제공항을 대상으로 수목 식재기반에 대한 구조적, 이화학적 특성을 파악함으로써 합리적인 토양관리 방향을 제시하고자 하였다. 세부 연구 대상지는 국제업무단지, 여객터미널, 공항지원단지, 자유무역지역, 진입도로 등 5개소이었다. 인천국제공항 수목생육 기반에 대한 토양 구조분석결과 표토로부터 80cm 이내에 경반층 또는 이질층의 토양층위가 존재하는 조사구는 총 27개소 중 9개소이었으며, 성토재료로 자갈 매립(4개소), 준설토와 혼합된 재료 매립(2개소), 점토가 다량 포함되어 투수가 불량한 성토 재료 사용(3개소), 폐골재를 매립한 경우(1개소) 등이었다. 토양의 물리적 특성으로 토양경도는 성토층 평균 $11.5kg/cm^2$이었고, 토성은 모래함량이 많은 사토, 사양토, 양질사토 등이었다. 화학적 특성으로서 토양산도는 성토층 평균 pH 6.7이었으며, 유기물함량은 0.7%, 전기전도도(EC)는 0.0dS/m, 교환성양이온함량은 $Ca^{2+}$ 3.4cmol/kg, $Mg^{2+}$ 1.5coml/kg, $K^+$ 0.3cmol/kg, $Na^+$ 1.0cmol/kg, 교환성양이온치환용량(CEC)은 11.0cmol/kg이었다. 성토층의 절대적 평균치는 대부분 조경설계기준을 만족하였으나 매립지토양특성상 층위별 조사구별 편차를 반영할 수 없는 한계가 있어 성토층위별로 분석한 교환성양이온별 염기포화도(BSP)는 소성토지역 $Ca^{2+}$ 29.9%, $Mg^{2+}$ 13.3%, $K^+$ 3.7%, 중성토지역 $Ca^{2+}$ 33.3%, $Mg^{2+}$ 17.0%, $K^+$ 2.7%, 대성토지역 $Ca^{2+}$ 32.6%, $Mg^{2+}$ 12.2%, $K^+$ 1.9%이었다. 교환성나트륨백분율(ESP)은 소성토지역 16.4%, 중성토지역 7.5%, 대성토지역 4.7%이었고, 나트륨흡착비(SAR)는 소성토지역 0.8, 중성토지역 0.3, 대성토지역 0.2이었다. 성토재료의 불균질과 불량, 준설토의 교란, 답압에 의한 높은 토양경도와 지중의 경반층형성, 낮은 유효토심 등의 물리적 요인과 높은 pH, 염기밸런스 불균형, 낮은 유기물, 유효인산 등은 식물생육에 영향을 주는 것으로 분석되었다.

• 대한인간공학회지
• /
• 제35권4호
• /
• pp.293-305
• /
• 2016

Objective: This study aims to measure cognitive load levels by analyzing the EEG of Koreans and foreigners, when they read a Korean text with care selected by level from the grammar and vocabulary aspects, and compare the cognitive load levels through quantitative values. The study results can be utilized as basic data for more scientific approach, when Korean texts or books are developed, and an evaluation method is built, when the foreigners encounter them for learning or an assignment. Background: Based on 2014, the number of the foreign students studying in Korea was 84,801, and they increase annually. Most of them are from Asian region, and they come to Korea to enter a university or a graduate school in Korea. Because those foreign students aim to learn within Universities in Korea, they receive Korean education from their preparation for study in Korea. To enter a university in Korea, they must acquire grade 4 or higher level in the Test of Proficiency in Korean (TOPIK), or they need to complete a certain educational program at each university's affiliated language institution. In such a program, the learners of the Korean language receive Korean education based on texts, except speaking domain, and the comprehension of texts can determine their academic achievements in studying after they enter their desired schools (Jeon, 2004). However, many foreigners, who finish a language course for the short-term, and need to start university study, cannot properly catch up with university classes requiring expertise with the vocabulary and grammar levels learned during the language course. Therefore, reading education, centered on a strategy to understand university textbooks regarded as top level reading texts to the foreigners, is necessary (Kim and Shin, 2015). This study carried out an experiment from a perspective that quantitative data on the readers of the main player of reading education and teaching materials need to be secured to back up the need for reading education for university study learners, and scientifically approach educational design. Namely, this study grasped the difficulty level of reading through the measurement of cognitive loads indicated in the reading activity of each text by dividing the difficulty of a teaching material (book) into eight levels, and the main player of reading into Koreans and foreigners. Method: To identify cognitive loads indicated upon reading Korean texts with care by Koreans and foreigners, this study recruited 16 participants (eight Koreans and eight foreigners). The foreigners were limited to the language course students studying the intermediate level Korean course at university-affiliated language institutions within Seoul Metropolitan Area. To identify cognitive load, as they read a text by level selected from the Korean books (difficulty: eight levels) published by King Sejong Institute (Sejonghakdang.org), the EEG sensor was attached to the frontal love (Fz) and occipital lobe (Oz). After the experiment, this study carried out a questionnaire survey to measure subjective evaluation, and identified the comprehension and difficulty on grammar and words. To find out the effects on schema that may affect text comprehension, this study controlled the Korean texts, and measured EEG and subjective satisfaction. Results: To identify brain's cognitive load, beta band was extracted. As a result, interactions (Fz: p =0.48; Oz: p =0.00) were revealed according to Koreans and foreigners, and difficulty of the text. The cognitive loads of Koreans, the readers whose mother tongue is Korean, were lower in reading Korean texts than those of the foreigners, and the foreigners' cognitive loads became higher gradually according to the difficulty of the texts. From the text four, which is intermediate level in difficulty, remarkable differences started to appear in comparison of the Koreans and foreigners in the beginner's level text. In the subjective evaluation, interactions were revealed according to the Koreans and foreigners and text difficulty (p =0.00), and satisfaction was lower, as the difficulty of the text became higher. Conclusion: When there was background knowledge in reading, namely schema was formed, the comprehension and satisfaction of the texts were higher, although higher levels of vocabulary and grammar were included in the texts than those of the readers. In the case of a text in which the difficulty of grammar was felt high in the subjective evaluation, foreigners' cognitive loads were also high, which shows the result of the loads' going up higher in proportion to the increase of difficulty. This means that the grammar factor functions as a stress factor to the foreigners' reading comprehension. Application: This study quantitatively evaluated the cognitive loads of Koreans and foreigners through EEG, based on readers and the text difficulty, when they read Korean texts. The results of this study can be used for making Korean teaching materials or Korean education content and topic selection for foreigners. If research scope is expanded to reading process using an eye-tracker, the reading education program and evaluation method for foreigners can be developed on the basis of quantitative values.

• 한국초지조사료학회지
• /
• 제19권1호
• /
• pp.41-48
• /
• 1999

본 시험은 원형베일러를 이용한 생볏짚 사일리지의 조제 가능성을 구명하고 적정 첨가제를 선발하기 위하여 1997년 10월부터 1998년 6월까지 축산기술연구소 초지사료과에서 실시하였다. 첨가제는 생볏짚을 원형베일로 만들기전 무처리, 개미산, 당밀, 당밀+요소 및 젖산균제 등 5처리를 두고 난괴법 3반복으로 수행하였으며 사일리지 품질과 가축 섭취량 등을 조사하였다. 조단백질 함량은 당밀+요소 처리구에서 가장 높았으며 소화율은 당밀 및 젖산균 처리구에서 증가하였다. 건물률에 있어서는 개미산 처리구가 가장 높았고 대조구에서 가장 낮게 나타났으며 첨가제 처리간에는 차이가 없었다. 그러나 산도(pH)는 당밀 및 젖산균제 처리구에서 대조구보다 낮게 나타났다. 유기산 함량은 전체적으로 2%이하로 낮게 나타났으며, 젖산 함량은 당밀 및 젖산균제 처리구에서 유의적으로 증가하였고(P<0.05) 낙산 함량은 감소하였다. 암모니아태 질소의 함량은 당밀+요소 처리구에서 유의적으로 높았으며 당밀 및 젖산균제 처리구에서 10% 이하로 낮게 나타났다. 7일간의 가축 급여시험에서는 젖산균제를 처리한 생볏짚 원형베일 사일리지에서 두당 섭취량이 무처리 원형베일 사일리지와 건조볏짚에 비해 높게 나타났다. 생볏짚 원형베일 사일리지 생산비는 수거면적이 넓어짐에 따라 생산비가 크게 낮아졌다. 이상의 결과를 종합하여 볼 때 생볏짚을 원형베일 사일리지로 조제시 당밀 또는 젖산균제를 첨가할 때 가장 우수한 사일리지를 조제할 수 있었고 젖산균제 처리시 가축 섭취량도 증가되는 것으로 나타났다.

• 한국축산시설환경학회지
• /
• 제10권3호
• /
• pp.141-154
• /
• 2004

자연에너지인 태양열을 동력원으로 하여 구동되는 물펌프는 물이 많이 필요한 여름철에 과 열원인 태양에너지가 강하므로 매우 이상적인 장치라 할 수 있다. 본 연구에서는 태양열 물펌프의 자동화운전을 실현하고자 작동물질의 압력변화를 감지하여 자동 운전되도록 하였으며, 이에 필요한 제어논리를 개발하고 회로론 구성하였다. 실험에서는 장치를 제작. 실험, 분석하였고 분석항목은 양수량과 효율, 압력, 온도를 분석하였다. 또한 자동화에 필수적인 응축기 진공을 위한 응축기의 최소 전열면적을 설계하였으며, 그 결과를 정리하면 다음과 같다. 1. 복사에너지를 동력으로 변환하여 물을 양수할 수 있었고, 자동화 제어회로에 의해 사이클을 반복할 수 있었다. 2 양수는 60분 동안에 13사이클을 수행하였으며, 사이클 당 소요시간은 약 4.9분이었다. 총 양수량은 69,200cc, 사이클 당 평균 5,320cc를 양수하였다. 이 과정동안 장치의 열효율은 $0.030\%$로 나타났다. 3. 실험과정에서 기액 분리탱크 내의 작동물질 증기의 온도는 물탱크로 증기를 배출하기 전후에 따라 약 $41\~49^{\circ}C$ 범위에 있었으며, 상당히 균일하게 변동하고 있었다. 물탱크와 공기탱크내의 온도는 약 $30^{\circ}C$ 정도 부근에서 유지되고 있었으며, 응축기 냉각수공급온도는 실험기간 중 $10\~13^{\circ}C$ 범위를 나타내었다. 응축기 출구온도는 $14\~17^{\circ}C$ 정도로서 응축기 냉각수의 입출구 온도차는 실험초기를 제외하면 약 $4^{\circ}C$ 전후로 나타났다 4. 기액 분리탱크 내의 압력은 자동화 프로그램 된 범위인 150$\~$450hPa(gauge)를 매우 정확하게 유지하였으며, 공기탱크내의 압력은 약 1200hPa로 나타났다. 응축기내의 압력은 약 600hPa로서 진공을 잘 유지함으로서 사이클을 반복하는데 문제가 없었다. 5. 한국의 전국 하루 평균 3.488kWh/($m^2{\cdot}day$)의 태양에너지를 기준으로 장치의 열효율이 $0.1\%$를 적용하고 전 양정을 10m로 보면 태양열복사 단위면적 $m^2$ 당 약 128kg의 물을 양수할 수 있을 것으로 예상된다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권6호
• /
• pp.836-842
• /
• 2009

The objectives of this study were to evaluate potential benefits of intercropping of corn with runner bean for a smallsized farming system, based on land equivalent ratio (LER) and silage yield and quality of corn intercropped with runner bean (Phaseolus vulgaris L.), in arid conditions of Turkey under an irrigation system. This experiment was established as a split-plot design in a randomized complete block, with three replications and carried out over two (consecutive) years in 2006 and 2007. Seven different mixtures (runner bean, B and silage corn sole crop, C, 10% B+90% C, 20% B+80% C, 30% B+70% C, 40% B+60%C, and 50% B+50%C) of silage corn-runner bean were intercropped. All of the mixtures were grown under irrigation. The corn-runner bean fields were planted in the second week of May and harvested in the first week of September in both years. Green beans were harvested three times each year and green bean yields were recorded each time. After the 3rd harvest of green bean, residues of bean and corn together were randomly harvested from a 1 $m^{2}$ area by hand using a clipper when the bean started to dry and corn was at the dough stage. Green mass yields of each plot were recorded. Silages were prepared from each plot (triplicate) in 1 L mini-silos. After 60 d ensiling, subsamples were taken from this material for determination of dry matter (DM), pH, organic acids, chemical composition, and in vitro DM digestibility of silages. The LER index was also calculated to evaluate intercrop efficiencies with respect to sole crops. Average pH, acetic, propionic and butyric acid concentrations were similar but lactic acid and ammonia-N levels were significantly different (p<0.05) among different mixtures of bean intercropped with corn. Ammonia-N levels linearly increased from 0.90% to 2.218 as the percentage of bean increased in the mixtures up to a 50:50 seeding ratio. While average CP content increased linearly from 6.47 to 12.45%, and average NDF and ADF contents decreased linearly from 56.17 to 44.88 and from 34.92 to 33.51%, respectively, (p<0.05) as the percentage of bean increased in the mixtures up to a 50:50 seeding ratio, but DM and OM contents did not differ among different mixtures of bean intercropped with corn (p>0.05). In vitro OM digestibility values differed significantly among bean-corn mixture silages (p<0.05). Fresh bean, herbage DM, IVOMD, ME yields, and LER index were significantly influenced by percentage of bean in the mixtures (p<0.01). As the percentage of bean increased in the mixtures up to a 50:50 seeding ratio, yields of fresh bean (from 0 to 24,380 kg/ha) and CP (from 1,258.0 to 1,563.0 kg/ha) and LER values (from 1.0 to 1.775) linearly increased, but yields of herbage DM (from 19,670 to 12,550 kg/ha), IVOMD (from 12,790 to 8,020 kg/ha) and ME (46,230 to 29,000 Mcal/ha) yields decreased (p<0.05). In conclusion, all of the bean-corn mixtures provided a good silage and better CP concentrations. Even though forage yields decreased, the LER index linearly increased as the percentage of bean increased in the mixture up to a 50:50 seeding ratio, which indicates a greater utilization of land. Therefore, a 50:50 seeding ratio seemed to be best for optimal utilization of land in this study and to provide greater financial stability for labor-intensive, small farmers.

• Journal of Biosystems Engineering
• /
• 제2권1호
• /
• pp.7-24
• /
• 1977

This paper is the forth and fifth one of the study on balanced type oscillating mole drainer. In the light of the results from previous reports about the model tests, some design criteria were established and a prototype machine was set up for experimental purpose. Motion characteristics and functionof the each parts of the machine were checked and analyzed. After that, performance tests of the prototype machine were carried out in thefield. Obtained results are summarized as follows ; 1. Ten centimeter of the bullet diameter was determined so as to be able to attach it to the tractors with capacity of 30 PS to 40 PS. 2. To maintain the balance between the moments of the front shank and rear shank, the oscillating amplitude of the rear bullet was determined to be larger than that of the front bullet. At the same time , the oscillating direction of the rear bullet was designed with the inclines of ten to thirty degrees. 3. An octagonal dynamo transduced was developed for measuring the compressive force of the upper link is measuring the draft force of the machine. Acceptable linear relationship between forces and strain responses from O.D.T. was obtained. 4. Analysing the balancing mechanism of the acting part of the machine , it was found that the total draft force of the machine was equal to the difference between the sum of the draft force produced from the right and left side bending moments of the lower drawber and the compressive force on the upper link. 5. There are acceptable linear relationship between the strain and twisting moment by driving shaft, and between strain and shank moment. Above results enable us to carry out the field experiment with prototype machine. 6. When the test machine was used in the field, it was possible to reduce the oscillating acceleration by forty percent in average as compared it with the single bullet mole drainer. 7. When the test machine was used under the oscillating condition, the dratt torce was reduced by 27 percent to 59 percent as compared it with the test machine under non-oscillating condition, while the draft force was increased by 7 percent to 20 percent as compared it with the mole drainer having oscillating single bullet. The reasoning behind this fact was considered as the resistance force due to the rear shank and bullet. 8. As the amplitude and frequency of the bullet were increased, the torque was increased accordingly. This tendency could be varied with the various characteristics of the given soils. And the larger frequency and amplitute, the more increasing oscil\ulcornerlating power but decreasing draft brce were needed, and draft force was increased as the velocity was increased.9. When the amplitude of the rear bullet was designed to be larger than that of the front bullet, the minimum value of the moment was lowered and oscillating acceleration was reduced. And when the oscillating direction of the rear bullet was declined back\ulcornerwards, oscillating acceleration was increased along with the increasing angle of decli\ulcornernation. When the test machine was operated in high speed, the difference between maximum moments and minimum ones became narrow. This varying magnitude of moments appeared on the moment oscillogram seems to be correlated to the oscillating acceleration and draft force. 10. From the analysis of variance, it was found that those factors such as frequency, amplitude, and operating velocity significantly affected in the oscillating acceleration, the draft resistance, the torque, the moment, and the total power required. And interaction between frequency and amplitude affected in the oscillating acceleration. 11. Within the given situation of this study, the most preferable operating conditions of the test machine were 7 Hz in oscillating frequency, 0.54 m/sec in operating velocity, and 39.1 mm in oscillating amplitude of front and rear bullets. However, it is necessary to select the proper frequency and magnitude of oscillation depending on the soil properties of the field in which the mole drainer is practiced by use of a bal1nced type oscillating mole drainer. 12. It is recommended that a comparative study of the mole drainers would be performed in the near future using two separate balanced oscillating bullet with the one which is operated by oscillating the movable bullet in a single cylinder or other balanced type which may be single oscillating bullet with spring, damper or balancing weight, and that of thing. To expand the applicability of the balanced type oscillating mole drainer in practical use, it is suggested to develop a new mechanism which perform mole drain with vinyl pipe or filling material such as rice hull.

• Journal of Chest Surgery
• /
• 제37권9호
• /
• pp.742-748
• /
• 2004

On-X 판막은 비교적 최근 소개된 이엽성 기계판막으로 국립의료원에서 시행한 28명의 환자의 단기 임상성적을 통하여 판막의 안정성과 유용성을 보고하고자 한다. 대상 및 방법: 1999년 5월부터 2003년 5월까지 On-X 판막을 이용하여 32예의 판막치환술을 받은 28명의 연속적인 환자를 대상으로 하였으며 승모판막 치환 12예, 대동맥 판막치환 10예 그리고 승모판막 및 대동맥판막치환 6예이었다. 수술 후 발생한 합병증 및 사망률에 대한 정의 및 분류는 심장 판막수술에 대한 AATS/STS 지침에 근거하여 분석하였다. 전체 추적기간은 64환자-년이었고 평균 27개월이었다 결과: 수술 후 30일 이내의 조기 사망률은 7.14% (2/28)이었으며 만기사망은 없었다. 2년 생존율은 전체적으로 92.86$\pm$4.87% 이며 대동맥판막치환술이 90$\pm$9.49%, 이중판막치환술이 83.3$\pm$1.52%, 승모판막치환술이 100%로 나타났다. 혈전 색전증이 가장 많은 합병증으로 2예가 있었으며 모두 승모판막치환 증례에서 발생되어 Linearized Ratio는 총 3.17%/환자-년이었으며 승모판막만을 보면 6.5%/환자-년이었고 항응고제와 관련 된 출혈, 판막폐쇄증, 판막주위누출, 심내막염 등의 합병증의 모든 예에서 발생되지 않아 판막관련 합병증이 없는 2년간의 빈도는 84.85 $\pm$ 10.75% (freedom from valve related complication)이었다. 수술전 NYHA Class III 이상인 증례가 24예(85.71%)이었으나 수술 후에는 NYHA Class I 또는 II에 속하는 증례가 25예로 89.29%를 보였다. 용혈척도로서 혈색소 수치, 혈장 LDH, 망상적혈구수치, 간접 빌리루빈치는 수술 3개월 후 검사에서 모두 정상수치를 보였다. 수술 후 3개월 추적관찰 시 시행한 심초음파상 승모판막의 최대 압력차는 6.1 $\pm$ 1.8 mmHg, 평균 압력차는 3.0$\pm$0.6 mmHg이었고 유효 개구 면적은 판막 직경 27 mm, 29 mm, 31 mm, 33 mm 각각 2.54$\pm$0.56 $m^2$, 2.39 $\pm$0.73 $m^2$, 2.34 $\pm$0.55 $m^2$, 2.40$\pm$0.63 $m^2$이었다. 대동맥판막의 최대 압력차는 21.1$\pm$14.12 mmHg,평균 압력차는 12.3$\pm$6.52 mmHg. 결론： On-X 판막수술 후 사망률, 판막관련합병증, 도플러 심초음파상 다른 판막들과 큰 차이를 보이지 않은 점과 NYHA Class의 호전과 정상수치를 유지하는 용혈지표를 고려한다면 비교적 좋은 결과를 보였으며 증례의 축적과 장기간의 임상분석이 이루어지면 안전하고 유용한 판막으로 입증될 것이라고 생각한다.

• 복식
• /
• 제26권
• /
• pp.175-206
• /
• 1995

The costume culture of China is as old and varied as her long history. As China is a multiracial nation and consists of fifty-six min-ority races including Han race, there are not only fifty-six different costumes in China but each races' costume habit is very different. Therefore, Chinese penninsula can be considered an enor-mous exhibition center of the costumes. This study undertook on the assumption that the costumes' mainstream of Korea and east-northern Asia as well as that of China could be examined by investigating the minority races' costumes in the east-and west-northern areas of China. The process of evolution of the costume of a particular people, country or area is subject not only to constraints related to geography such as climate, topography or local products but is also affected by numorous environmental influences including cultural, economic, social and even pol-itical ones in terms of the selection of material, styling, color and standard of tailoring. In other words, things like philosophy of life, religious be-lief, aesthetic outlook, moral code, class system, degree of affluence, and cultural exchange will all be reflected directly or indirectly by features of a people's or country's style costume. Of course, there are several factors affecting to the style of costume of the minority people in China. However, the only three factors-geo-graphical and environmental, production method, and religious belef-will be touched in this study. First of all, the geograghical and eenviron-mental factor would be the decisive one because the costume should be designed to overcome the constraints of climate and geographical environ-ments. Accordingly, each race has an unique style of costume. The costume of the minority races in the northern parts are loose and wide, and made of warm furs. For instance, Mongolian robe has the quality of anti-wind, anti-cold and warmness, and the width of a sleeve is narrow and long. Secondly, the costume style can be said to be limited by the production pattern, when the geo-graphical environment was affected to decide the costume style, the production pattern was together affected to it . In case of Mongolian robe, they should satisfy the dual condition as the practical function. One is the condition that they should be fitted to the climate, and the other is the condition that they should be suit-able to the nomadic life. Mongolian robes are suitable to the nomadic peoples because they are designed for not only overcoming the cold wind and weather but being used as the bedquit at night. The costumes of Hoche people was made of the skin of the fish and wild animals because of their main means of living being fishing and hunting. Accordingly, their costumes are dur-able, warm and water-proof. Finally, the style of the costume is affected by the religious belief. In other words, the pattern in fashion is closely related with the religious be-lief or ancestor worship and nature worship. Ac-cordingly, the symbols of these worship are often emerged in the decoration of the costume. The design of costume of the people in the northern areas of China is very simple. It is related with their monotheism. On the other hand, the costumes of twen쇼 minority races in the east-northern parts of China can be devided into three racial groups such as the long robes of Man people and Mongols, Tunics of the peoples in the west-northern areas, and the pants and jackets of Hoche people. The minorority races all has not only the unique costume habit but their costumes are also related with their living style and production means.