• Journal of the Economic Geographical Society of Korea
• /
• v.17 no.4
• /
• pp.817-831
• /
• 2014

In this paper insights from studies on the middle income trap and value chains analyses are combined to investigate one particular industry in one particular region: the sugarcane industry in Northeastern Thailand. Focusing on this region enables an in-depth focus on geographical differentiation of the middle income trap. The empirical outcomes demonstrate that policymakers involved with sugar should look at the particular challenges in Northeastern Thailand: 1. The role of brokers which is unaddressed in the current regulatory environment; 2. A lack of information of the regulatory environment among growers; 3. Distrust between growers and millers; 4. Alack of implementation of R&D efforts; 5 .A lack of support from associations; 6. The labor shortage problem, and 7. No incentives for growers, brokers and millers to improve quality and embark on upgrading. Since agricultural value chains in Southeast Asia often start in relatively poor rural areas it is imperative that policymakers balance the interests of upstream, midstream and downstream actors. Unfortunately, this is rather difficult as midstream actors (millers) and wholesalers are powerful and therefore, are in the best position to defend their interests. Our insights could function as comparative material for similar studies within other Southeast Asian upstream value chains.

• Korean journal of communication and information
• /
• v.44
• /
• pp.223-247
• /
• 2008

The purpose of this study is to explore the anti-smoking message effects and smoking status on smoking belief attributes. Based on the health behavior theories such as theory of reasoned action, health belief model, and social cognitive theory, three factors are selected to investigate the effects of anti-smoking campaign messages. The balance of benefits and barriers, self-efficacy, and social pressure are selected as independent variables. Three two-way ANOVA were conducted. Results showed that the main effect of social pressure were found with the social smoking attributes. Interaction effects were found on the nonsmoker-social pressure group and the non-smoker-two sided message group. It is found that nonsmokers accepted these two anti-smoking messages easily as compared to smoker groups. No main smoking status was found in this study; it is believed that smoking is a habitual that is not changed easily because attitude formation takes time. Results revealed that the two-sided message video releases and the social pressure video releases were favored by both smokers and nonsmokers. This study contributes the theoretical framework that can be transferred to the practices of anti-smoking campaign. Also, the researcher produced the televised stimuli which is not common in health message studies. By using the televised message material, the research tried to solve the validity problem which is common in experimental design.

• Korean Institute of Interior Design Journal
• /
• v.21 no.6
• /
• pp.224-232
• /
• 2012

Although evolution of construction materials brought about development of modern architecture, they caused destruction of the environment and pollution. This problem is not a new one in terms of ecological esthetics and materials of sustainable architecture in light of the Eastern view of nature and this idea became a background of this study. The basic concept is to try to find out their characteristics from a perspective of ecological esthetics in relation to traditional building materials that nature, architecture, and humans coexist and live with each other to balance. Based on ecological esthetics and precedent studies on materials of traditional architecture, we investigated connections, expressive methods and characteristics in traditional residential construction space. This attempt has meanings in that it can propose a new framework of forming various viewpoints and spatial perceptions in relation to esthetics and traditional construction materials. The current study examined the characteristics by dividing them into tangible and intangible elements based on expressive features of elements of nature. The characteristics found by this process are not simply notion of physical materials, but plays a key role aesthetically and ecologically. Nature and materials take circulation of the law of nature, regulate energy, increase efficiency and play a major role in an economic way. Nature in itself becomes natural alternative energy, and plays its role in an invisible fashion. It examined how expressive characteristics of construction materials are reflected through analyzing residential space and Korean traditional garden having relationships with Eastern viewpoint of nature in relation to Korean traditional construction materials from a perspective of ecological esthetics. Findings of the above study indicate that expressive characteristics of Korean traditional construction materials from a perspective of ecological esthetics are that nature, space, humans coexist and live together and they will provide a clue to an alternative to solve ecological and environmental problems modern society will have in the future. Through this process, it provided a possibility that traditional space and materials can be succeeded in creative and new ways, and it found out the way for nature, space, and humans to coexist and a possibility of ecological esthetics. It addition, it will provide a key base as an alternative of sustainable design of the future.

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.806-812
• /
• 2008

The ammonia decomposition reaction has been of increasing interest as a means of treating ammonia in flue gas in the presence of precious metal catalyst. Various catalysts, $Pt-Rh/Al_2O_3$, $Pt-Rh/TiO_2$, $Pt-Rh/ZrO_2$, $Pt-Pd/Al_2O_3$, $Pd-Rh/Al_2O_3$, $Pd-Rh/TiO_2$, $Pd-Rh/ZrO_2$, $Pt-Pd-Rh/Al_2O_3$, $Pd/Ga-Al_2O_3$, $Rh/Ga-Al_2O_3$, and Ru/Ga-$Al_2O_3$, were synthesized by using excess wet impregnation method. Using a homemade 1/4" reactor at $10,000{\sim}50,000hr^{-1}$ of space velocity in the presence of precious metal catalyst ammonia decomposition reactions were carried out to investigate the catalyst activity. The inlet ammonia concentration was maintained at 2,000 ppm, with an air balance. Both $T_{50}$ and $T_{90}$, defined as the temperatures where 50% and 90% of ammonia, respectively, are converted, decreased significantly when alumina-supported catalysts were applied. In terms of catalytic performance on the ammonia conversion in the presence of hydrogen sulfide, $Pt-Rh/Al_2O_3$ catalyst showed no effect on the poisoning caused by hydrogen sulfide. These results indicate that platinum-rhodium bimetallic catalyst is a useful catalyst for ammonia decomposition.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.6
• /
• pp.1029-1044
• /
• 2017

The Discrete Element Method (DEM) is one of the useful numerical methods to analyze the behavior of the ground formation by computing the motion and interaction using particles. The DEM has not been applied in civil engineering but also a wide range of industrial fields, such as chemical engineering, pharmacy, material science, food engineering, etc. In this study, to review a performance of the spoke-type earth pressure balance (EPB) shield TBM (Tunnel Boring Machine), the commercial software based on the DEM technology was used. An analysis of the TBM during excavation was conducted according to two pre-defined excavation conditions with the different rotation speed of a cutterhead. During the analysis, the resistant torque at the face of the cutterhead, the compressive force at the cutterhead and shield surface, the muck discharge at the screw auger were measured and compared. Upon the two kinds of excavation conditions, the applicability of the DEM analysis was reviewed as a modelling method for the TBM.

• Geomechanics and Engineering
• /
• v.21 no.1
• /
• pp.23-33
• /
• 2020

An advancing cutting roof for gob-side entry retaining with no-pillar mining under specific geological conditions is more conducive to the safe and efficient production in a coalmine. This method is being promoted for use in a large number of coalmines because it has many advantages compared to the retaining method with an artificial filling wall as the gateway side filling body. In order to observe the inner structure of the gateway cutting roof and understand its stability mechanism, an equivalent material simulation experiment for a coalmine with complex geological conditions was carried out in this study. The results show that a "self-stabilization bearing structure" equilibrium model was found after the cutting roof caving when the cut line deviation angle was unequal to zero and the cut height was greater than the mining height, and the caving roof rock was hard without damage. The model showed that its stability was mainly controlled by two key blocks. Furthermore, in order to determine the optimal parameters of the cut height and the cut line deviation angle for the cutting roof of the retaining gateway, an in-depth analysis with theoretical mechanics and mine rock mechanics of the model was performed, and the relationship between the roof balance control force and the cut height and cut line deviation angle was solved. It was found that the selection of the values of the cut height and the cut line deviation angle had to conform to a certain principle that it should not only utilize the support force provided by the coal wall and the contact surface of the two key blocks but also prevent the failure of the coal wall and the contact surface.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.121-128
• /
• 2006

The elements to enhance preference in symbol design are mainly related to consumers' response and aesthetic elements. Because certain aesthetic elements in design affect consumers' response and it is actually presented through (the different level of) preference. This study through surveying case studies examines whether a certain aesthetic element in symbol design gives rise to much preference. According to the result of study, high preference in symbolic design depends on high level of Rhythm, Balance, Harmony, Elaboration, Round, Gestalt, Organic, and Artificial/Natural among aesthetic elements. In comparison, it is founded that Simplicity/complexity, Objective/Abstract, depth, and symmetry should be designed at the moderate level, and proportion, repetition of elements be at the low level. Additionally(or Besides) this study makes out that symbol design cases with high preference have shapes from natural material or patterns of traditional culture, while cases with low preference have shapes from geometric figures. On the basis of these results, a guideline of symbol design could De offered(or suggested) to fit preference of consumers. But, this study is mostly concerned with only affect among emotional reactions of consumer in a scope of study, and is considered only in the aspect of form excluding color and texture.

• The KIPS Transactions:PartA
• /
• v.16A no.5
• /
• pp.395-402
• /
• 2009

Since 2005, Cyber home learning systems(CHLS) have been run with the purpose of clearing up the regional disparity and reducing the private education cost. At this point, it is necessary to have the analysis on the satisfaction and effectiveness awareness of the CHLS. The goal of this paper is to suggest an evaluation model for satisfaction and pedagogical effectiveness of CHLS and to support the management of satisfaction and effectiveness awareness of the CHLS for the low-income bracket children. Our major contributions can be summarized as follows: First, we present an evaluation model of satisfaction and effectiveness awareness of the CHLS for the low-income bracket children. Second, we survey the satisfaction, effectiveness awareness and improvement facts from the students who divided according to their sex, residence area and classes and compare with suggesting evaluation models. This paper is to find the measurement of the satisfaction and effectiveness awareness of the CHLS for the low-income bracket children. Furthermore, we can use this model as a material to balance the education opportunity, which is the purpose of CHLS, and abolish the education differentials.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.6
• /
• pp.383-387
• /
• 2004

Effects of oyster shell powder as a liming material were investigated in an apple orchard. Soil texture of the apple orchard was silty clay loam (Upyeong series with 7% of slope) and topsoil pH was 5.6. Treatments of 1,590 kg oyster shell powder $ha^{-1}$ and calcium-magnesium carbonate as much as oyster shell powder were included in the experiment. With treatments of oyster shell powder and calcium-magnesium carbonate, the length, number and diameter of new branches and the diameter of main, secondary and side branches increased in comparison with control. With oyster shell powder application, soil pH increased from 5.6 to 6.8 at the harvest. In addition, it increased exchangeable Ca from 2.6 to $4.2cmol_c\;kg^{-1}$. But it didn't make any difference in chlorophyll, sugar and malic acid contents. The apple weight per fruit of oyster shell powder application was 9 g more than that of control. Apple yield was highest ($37,000kg\;ha^{-1}$) in the oyster shell powder treatment, and the yield increase was significantly different at 5% level LSD. We concluded that the oyster shell powder can be an alternative of lime and effective to restore soil nutrient balance in apple orchard soil.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.25 no.3
• /
• pp.176-180
• /
• 1992

Nitrification Is an important facet of water recycling fish culture system, because the toxic cation ammonia is converted to the innocuous anion nitrate. This study was attempted to find the optimal design factor of submerged filter for ammonia removal in water recycling fish culture system. The experimental system was designed submerged filter with corrugated skylight plate, and operated in the fish farm, National Fisheries University of Pusan. When the influent ammonia concentration was about 10mg/l (9.43-13.66mg/l) nitrification rates were tested for the removal of ammonia over a four stage of the hydraulic loadings. The submerged filter removed 76.24, 62.88, 39.09 and $9.20\%$ of the ammonia to hydraulic load of 0.028, 0.037, 0.056 and $0.111m^3/m^2$. day, respectively. We can apply the above data to the material balance on the ammonia concentration in a fish reservoir, and conclude that the maximum allowable ammonia production was 1.52mg/min, and the optimal hydraulic loading was $0.047m^3/m^2$\;\cdot day$, in order to maintain the ammonia concentration below 10mg/l in the fish reservoir.