• Conservation Science in Museum
• /
• v.6
• /
• pp.31-37
• /
• 2005

The copper incense burner inlaid with gold and silver and purchased by the National Museum of Korea in 2002 was to be corroded severely throughout the surface. It was difficult to recognize the part with silver inlaying. Using the abrasive method with alumina, however, its splendid inlaying patterns were restored. Prior to applying the abrasive method, the quality was examined, and a material that could help bring out the patterns without causing too much damage to the artifact, selected. The overall condition of the incense burner was also checked through X-ray equipment to know the condition of the gold and silver inlaying, and by x-ray fluorescence spectroscopy to confirm the composition of the incense burner and gold and silver inlaying. The result of this process is expected to serve as valuable data in future research on incense burners inlaid with gold and silver.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.5
• /
• pp.88-97
• /
• 2014

For the purpose of reproduction of traditional gold thread, the artifact investigation was organized for 70 cases (109 pieces) of relics from Korea, China and Japan. In most cases, the main backside material of gold thread from Korea was the bast fibers from paper mulberry. In this study, the optimum sheet-making of Hanji for gold thread reproduction was tried by controlling several process factors of Hanji such as the cooking and beating time of paper mulberry fibers, the number of sheet-making ply, and converting method (Dochim). Tensile index, folding endurance and compressive strength of Hanji showed differences according to the correlation between cooking and beating time, and application of converting method (Dochim), while bending stiffness fell with decrease of thickness. These results can be applied to consider manufacturing factors to make Hanji for the production of gold thread.

• Conservation Science in Museum
• /
• v.11
• /
• pp.17-30
• /
• 2010

Here is an introduction of the conservation process and storing method of 26 garments for exhibition among the excavated garments of Cheonngyeongunju(a princess) preserved in the National Museum of Korea. Before processing, the artifacts were investigated to find out the type of material and the damaged parts, and then surface and wet cleaning were conducted. After that, it were dried and fixed while held by hand for stability of the artifacts. When stored, the artifact was folded minimally in large parts to prevent damage and placed in a neutral box with buffers in between.

• Structural Engineering and Mechanics
• /
• v.75 no.3
• /
• pp.369-376
• /
• 2020

The life of conventional steel plastic injection molds is long but manufacturing cost and time are prohibitive for using these molds for producing prototypes of products in limited numbers. Commonly used 3D printers and rapid prototyping methods are capable of directly converting the digital models of three-dimensional solid objects into solid physical parts. Depending on the 3D printer, the final product can be made from different material, such as polymer or metal. Rapid prototyping of parts with the polymeric material is typically cheaper, faster and convenient. However, the life of a polymer mold can be less than a hundred parts. Failure of a polymeric mold during the injection molding process can result in serious safety issues considering very large forces and temperatures are involved. In this study, the feasibility of the inspection of 3D printed molds with the surface response to excitation (SuRE) method was investigated. The SuRE method was originally developed for structural health monitoring and load monitoring in thin-walled plate-like structures. In this study, first, the SuRE method was used to evaluate if the variation of the strain could be monitored when loads were applied to the center of the 3D printed molds. After the successful results were obtained, the SuRE method was used to monitor the artifact (artificial damage) created at the 3D printed mold. The results showed that the SuRE method is a cost effective and robust approach for monitoring the condition of the 3D printed molds.

• Journal of Conservation Science
• /
• v.31 no.4
• /
• pp.341-350
• /
• 2015

The preservation has been conducted for wooden ship timber excavated from Bonghwang-Dong, Gimhae, Korea. The species were analyzed for conservation as pre-treatment. Outer panel was analyzed as Cinnamomum spp. and trapezoid wooden material, wooden wedge was Cryptomeria japonica D. Don.. Wooden ship timber have been treated by vacuum-freeze drying after impregnation with aqueous PEG#3,350 solution(almost 45%). The timber of Bonghwang-Dong ship is considered as Japanese ship that many data such as conformation of ship, location of site, japanese artifact of around site were confirmed. In addition, The ship timber give us the important information about the international trade with Japan.

• Science of Emotion and Sensibility
• /
• v.13 no.3
• /
• pp.467-474
• /
• 2010

Recently, Study of functional clothing for Vital sensing is focused on reducing artifact by human motions, in order to enhance the electrocardiogram(ECG) sensing accuracy. In this study, considering the factors for each element found from the analysis, a 3-lead electrode inside textile embroidered with silver yarn was developed, and draft designs off our types of vital-signal sensing garments, which are 'chest-belt typed' garment, 'cross-typed' garment 'x-typed' garment and 'curved x-typed' garment, were prepared. The draft designs were implemented on a sleeveless male shirt made of an elastic material so that the garment and the electrodes can remain closely attached along the contour of the human body, and the acquired data was sent to the main computer over a wireless network. In order to evaluate the effects caused by body movements and the ECG-sensing capability for each type in static and dynamic states, displacements were measured from one and two dimensional perspectives. ECG measurement evaluation was also performed for Signal-to-noise ratio(SNR) analysis. Applying the experimental results, the draft garment designs were modified and complemented to produce two types of modular approaches 'continuous-attached' and 'insertion-detached' for the ECG-sensing smart clothing.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.4
• /
• pp.287-301
• /
• 2019

Preservation of the original form is the principle for conservation, management and utilization of cultural heritages. Thus, non-destructive analysis of these samples are important field of the conservation science. In this study, examined the applicability of nondestructive surface X-ray diffraction analysis (ND-XRD) for cultural heritage by materials (rock specimen, jade stone, pigment painted specimen, earthen artifact, metal artifact). In result, all type of sample is recorded suitable X-ray diffraction patterns for identifying mineral composition in case of surface condition with adequate particle size and arrangement. And diffraction pattern is reflected surface information than matrix. Therefore, ND-XRD is thought to be applicable not only mineral identification but also interpretation of manufacturing technique and alteration trend about layered sample (in horizontally or vertically). Whereas some exceptional diffraction patterns were recorded due to overlapping information on specific crystal planes. It caused by skip the sample treatment (powdering and randomly orientation). It could be advantageously used for mineral identification, such as preferred orientation of clay minerals. In contrast, irregular diffraction pattern caused by single crystalline effect is required careful evaluation.

• Journal of Conservation Science
• /
• v.36 no.5
• /
• pp.368-382
• /
• 2020

It was confirmed that a white porcelain figurine in underglaze iron was damaged after exhibition. This study analyzes the current state of salt damage on the artifact and identifies the factors contributing to its deterioration by examining the material characteristics of the artifact and exhibition environment. The analysis will thus assist in preparing a conservation scheme for artifacts. The crystallized carbonate on the surface of the white porcelain figurine is a water-soluble alkali salt with high hygroscopicity and high solubility in water. This solubility increases as the temperature increases. The figurine was low-fired at approximately 1000℃. A lead glaze was applied, and thin cracks were formed on the glazed surface, indicating poor surface properties. Our analysis suggested that the showcase used in the exhibition likely created a moist environment resulting from condensation, as it was exposed to high temperature and relative humidity, particularly in comparison to the exhibition room where the temperature was regulated using an air conditioner. In addition, the artifacts in the showcase were exposed to sudden changes in temperature and relative humidity as the air conditioner was repeatedly turned on and off. Therefore, it can be deduced that the soluble salt remaining on the white porcelain figurine moved toward the surface of the relatively weak glaze as a result of the temperature, and the crystallized salt exacerbated surface damage as the moisture evaporated in a dry environment.

• Conservation Science in Museum
• /
• v.29
• /
• pp.33-46
• /
• 2023

Modern and contemporary cultural assets are defined as a collective term for tangible historical and cultural assets produced in the modern and contemporary period (around the opening of Joseon to the present) in Korea. Among them, rickshaws have been used as a major means of transportation for about 40 years since the opening of the ports in Joseon. The repair process for rickshaws divides the rickshaw into three parts, namely the body, the cover, and the wheels, applying a plaster treatment process by referring to the outcomes of the condition assessment and material analysis for the metal, wood, fiber, and paint used. Overall, the repair process is carried out through dry/wet cleaning, joining, stabilization, reinforcement of damaged parts, and other restoration treatments, which reveal metal decorations and patterns on the scaffolding (flowers, arabesque patterns, etc.) that were previously not observable with the naked eye, while also adding to the stability of the artifact. In addition, props were produced to ensure the artifact's safe exhibition.

• Conservation Science in Museum
• /
• v.13
• /
• pp.23-31
• /
• 2012

The object artifacts of this study are the iron artifacts owned by the Kyunghee University Central Museum. The surfaces of the iron artifacts are opaque due to the coated materials which are presumed to be paraffin or bee's wax while they are plate-shaped and exist in thickly exfoliated condition caused by severe corrosion developed on the overall surfaces. Therefore, in order to remove the coated materials away from the surfaces of the artifacts rather safely, reversibility tests have been carried out and the conservation treatment was performed upon the basis of and in application of the experimental results. The study methodologies are that: first, the FT-IR analysis was carried out to determine the ingredients of the coating-treated material on the surface; second, by applying various kinds of organic solvents, the kinds of agents that allow the artifact's surface-coating material to be reversible have been identified through experiments; third, the most suitable agent for removing coating material was selected and applied to the real artifacts on the basis of the results of the reversibility tests. Results from the study: first, as a result of the FT-IR analysis, the coating agent used on the artifacts was identified to be of the same ingredients as those of paraffin; second, among organic solvents, xylene, toluene, trichloroethylene and methyl alcohol were identified to be usable for dissolving paraffin whereas toluene was judged to be the most suitable for removing the coating agent; third, when applying the selected agents on the real artifacts, due to the fact that removing the whole paraffin might cause the artifact to disintegrate, the paraffin of only the part that covered the surfaces opaquely was removed using cotton swab or gauze, thus completing the conservation treatment.