• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.2080-2081
• /
• 2007

In this paper, the polymer insulators which had been used for electrical insulation were investigated surface leakage current and deterioration pattern. Because the electrical fault took place at the dust occurrence area due to environmental pollution. In particular, the dust accumulates easily on insulation material which is exposed an external long time. The leakage current brings out electrical fault after all. Also, it is need to variation of material and shape to repress a leakage current on electrical material. In this paper, we measured a leakage current on electrical material of facilities by dust, and in experiments the prevention to electrical fault was studied.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.556-557
• /
• 2005

The distribution facilities, such as suspension insulator, line post insulator, lightning arrester, COS, used for long periods in the industrial pollution area were investigated. The electrical test and the material analyses were performed on the polluted and non-polluted facilities. The low frequency dry flashover voltage of polluted suspension was decreased about 8% in comparison with non-polluted one. The polluted materials turned out with the iron which came from the foundries. The polluted materials turned out with the iron which came from the foundries. This conductive materials decreased the leakage distance, resulting in reducing of electrical properties.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.12
• /
• pp.949-954
• /
• 2011

In this study, the characteristics and error ranges of the mechanical bonding strength were analyzed according to before and after thermal shock test for various chips of automotive application component using Sn-3.0Ag-0.5Cu solder. In the after thermal shock test, the mechanical bonding strengths tend to decrease, meanwhile decreasing rates of mechanical strengths were less then 12% at specimen's bonding area below 3.5$mm^2$, and were from 17 to 21% at specimen's bonding area above 12 $mm^2$. On the other hand, Specimen's mean deviation rates were about 5% at specimen's bonding area more than 12 $mm^2$. Inversely, at specimen's bonding area is less then 3.5 $mm^2$, mean deviation rates were increased to about 8%. It means that the smaller device size is, the larger mean deviation rate. In addition, error ranges and deviation rates of the mechanical bonding strengths may differ slightly depending on their bonding area. Furthermore, process conditions as well as method of mechanical reliability evaluation should be established to reduce the error ranges of bonding strength.

• Economic and Environmental Geology
• /
• v.12 no.4
• /
• pp.207-221
• /
• 1979

The studied area occupies the southern part of Haenam peninsula located in the southwestern corner of Korea. The stratigraphic sequences of the area are grouped into following three units in ascending order. (1) Late Cretaceous sedimentary rocks of Uhangri Formation which consist of the alternative beds of black shales and tuffaceous sediments, Hwangsan acidic fine grained tuffs and Jindo rhyolite flows. (2) Late Cretaceous biotite granite and acidic porphyries which intruded the Late Cretaceous sedimentary rocks. (3) Tertiary(?) pitchstone. The study purposes to delineate any of geochemical aspects on the deposition of the sequences, the average amounts of organic materials and the effect to the maturation of hydrocarbonization which has been occured by the intrusives. Sixty nine black shale samples were collected from Uhangri Formation in the northern and southern coasts of the peninsula. Organic carbons, total extracted organic matters and hydrocarbons were mainly determined by the Soxhlet extraction method, together with C-H-N elemental analyses. Based on the field and laboratory studies, the following interpretations have been obtained. (1) The paleohydrostatic condition of the sedimentation which took place was relatively calm and stable to delineate a lacustrine environment. (2) The amounts of organic material were more or less constant throughout the period of the deposition of the sediments. (3) The degree of hydrocarbonization of the Uhangri Formation in the northern coast was taken place higher than that in the southern coast due to the differences of thermal effect by the biotite granite which is assumed to be as a heat source in the area. Among the northern coast, some black shales in Uhangri and Mogsam areas which had been under the most moderate temperature environment snow symptomatic oily material, whereas, those in Sinseongri area do not, which were presumably to be intensive thermal alteration by the later acidic porphyries.

• Smart Structures and Systems
• /
• v.7 no.1
• /
• pp.1-13
• /
• 2011

It has been shown in the literature that active adjustment of the intake area of a jet engine has potential to improve its fuel efficiency. This paper presents the design and control of a novel proof-of-concept active jet engine intake using Nickel-Titanium (Ni-Ti or Nitinol) shape memory alloy (SMA) wire actuators. The Nitinol SMA material is used in this research due to its advantages of high power-to-weight ratio and electrical resistive actuation. The Nitinol SMA material can be fabricated into a variety of shapes, such as strips, foils, rods and wires. In this paper, SMA wires are used due to its ability to generate a large strain: up to 6% for repeated operations. The proposed proof-of-concept engine intake employs overlapping leaves in a concentric configuration. Each leaf is mounted on a supporting bar than can rotate. The supporting bars are actuated by an SMA wire actuator in a ring configuration. Electrical resistive heating is used to actuate the SMA wire actuator and rotate the supporting bars. To enable feedback control, a laser range sensor is used to detect the movement of a leaf and therefore the radius of the intake area. Due to the hysteresis, an inherent nonlinear phenomenon associated with SMAs, a nonlinear robust controller is used to control the SMA actuators. The control design uses the sliding-mode approach and can compensate the nonlinearities associated with the SMA actuator. A proof-of-concept model is fabricated and its feedback control experiments show that the intake area can be precisely controlled using the SMA wire actuator and has the ability to reduce the area up to 25%. The experiments demonstrate the feasibility of engine intake area control using an SMA wire actuator under the proposed design.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.02a
• /
• pp.32-41
• /
• 2000

Sand drain as a vertical drainage is widely used in soft ground improvement Recently, sand, the principal source of sand drain, is running out. The laboratory model tests were carried out to utilize gravel as a substitute for sand. Though which the characteristics of gravel are compared to those of sand for engineering purpose. Two cylindrical containers for the model test were filled with marine clayey soil from the west coast of Korea with a column in the center, one with sand, the other with gravel. Vibrating wire type piezometers were installed at the distance of 1.0D, 1.5D and 2.0D from the center of the column. The characteristics of consolidation were studied with data obtained from the measuring instrument place on the surface of the container. The parameter study was performed on the marine clayey soil before and after the test in order to verify the effectiveness of the improvement. The clogging effect was checked at various depth in gravel column after the test. In-situ tests area was divided into two areas by material used. One is Sand Drain(SD) and Sand Compaction Pile(SCP) area, the other is Gravel Drain(GD) and Gravel Compaction Pile(GCP) area. Both areas were monitored to obtain the information on settlement, pore water pressure and bearing capacity by measuring instruments for stage loading caused by embankment. The results of measurements were analyzed. According to the test results, the settlement was found to be smaller in gravel drain than in sand drain. The increase in bearing capacity by gravel pile explains the result. The clogging effect was not found in gravel column. It is assumed that gravel is relatively acceptable as a drainage material. Gravel is considered to be a better material than sand for bearing capacity, and it is found that bearing capacity is larger when gravel is used as a gravel compaction pile than as a gravel drain.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.2
• /
• pp.81-90
• /
• 2017

Recent floodplain data are important for river master plan, storm and flood damage reduction comprehensive plan and pre-disaster impact assessment. Hazard map, base of floodplain data, is being emphasized as important method of non-structural flood prevention and consist of inundation trace map, inundation expected map and hazard information map. Inundation trace map describes distribution of area that damaged from typhoons, heavy rain and tsunamis and includes identified flood level, flood depth and flood time from flooding area. However due to lack of these data by local government, which are foundational and supposed to be well prepared nationwide, having hard time for making inundation trace map or hazard information map. To overcome this problem, time consumption and budget reduction is required through various research. From this study, DEM (Digital Elevation Model) from image material from UAVS (Unmanned Aerial Vehicle System) and numeric geographic map from National Geographic Information Institute are used for calculating flooding damaged area and compared with inundation trace map. As results, inundation trace map DEM based on image material from UAVS had better accuracy than that used DEM based on numeric geographic map. And making hazard map could be easier and more accurate by utilizing image material from UAVS than before.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.1
• /
• pp.53-67
• /
• 2002

This study was aimed to analyze the stress distribution of implant and supporting tissue in single tooth implant restoration using Branemark $system^{(R)}$(Nobel Biocare, Gothenberg, Sweden) and Bicon system(Bicon Dental Implants, Boston, MA). Two dimensional finite element analysis model was made at mandibular first premolar area As a crown materials porcelain, ceromer, ADA type III gold alloy were used. Tests have been performed at 25Kgf vertical load on central fossa of crown portion and at 10Kgf load with $45^{\circ}$ lateral direction on cusp inclination. The displacement and stresses of implant and supporting structures were analyzed to investigate the influence of the crown material and the type of implant systems by finite element analysis. The results were obtained as follows : 1. The type of crown material influenced the stress distribution of superstructure, but did not influence that of the supporting alveolar bone. 2. The stress distribution of ceromer and type III gold alloy and porcelain is similar. 3. Stress under lateral load was about twice higher than that of vertical load in all occlusal restorative materials. 4. In Bicon system, stress concentration is similar in supporting bone area but CerOne system generated about 1.5times eater stress more in superstructure material. 5. In Branemark models, if severe occlusal overload is loaded in superstvucture. gold screw or abutment will be fractured or loosened to buffer the occlusal overload but in Bicon models such buffering effect is not expected, so in Bicon model, load can be concentrated in alveolar bone area.

• Journal of the Korean Institute of Rural Architecture
• /
• v.8 no.1
• /
• pp.33-42
• /
• 2006

The rice mill occurred from modernization process of the farming village. It comes to follow in intention of the architect and is not the position building. By the user of the building it comes to follow necessary and it is a position thing. The like this rice mill was the community center of the village. Also the material which is unique and form quality were land mark of the village. The object of research is the rice mill where it takes charge of a like this role. And the scope of research is 8 rice mills of Eomjeong Myeon Chungju City which is located in the northern Chungbuk area. The progress of research the documentary survey, actual measurement, question, field work it analyzed the construction quality which the rice mill keeps with base and it arranges. The results of study are follows; 1. conditions of location : The rice mill the entrance of the village, the crossroads system is formed most the place is doing in the place which well. 2. The inside composition of a space : In order to compose the work space and the store space efficiently the plane surface is doing a rectangular form. 3. Form of roof : The roof raises the efficient characteristic of the work where is not the design which is intended to be naturally formed from the space composition for. 4. Selection of material : Most it was a natural enemy and an utility, it selected the scientific material and it used.

• Journal of Korean Elementary Science Education
• /
• v.21 no.2
• /
• pp.187-200
• /
• 2002

The purpose of this study is to examine how well students can acquire scientific knowledge from the process and activity presented in the textbook. This is achieved by analysing of comparison on the material area in the 6th and 7th national curriculums' 3rd and 4th grade science textbooks. The method of this study is to analyse the contents, teacher's instruction and illustrations of the textbooks in the material area in both 6th and 7th national curriculum's 3rd and 4th grade science textbooks. Following is the result of the study. First, compared to the 6th national curriculum's content. 7th national curriculum is composed by phenomenon and activity focused. This considers student's developmental stages and abilities of concentration so one topic in the textbook is divided into 16 small contents. Therefore the textbook content of the 7th curriculum seems to have desirable changes. Secondly, teacher's instruction in the textbook of the 7th curriculum has impartial distribution in part Ⅰ and part Ⅱ according to Homey's analysis. This shows that some problems of writing textbooks that were pointed in the 6th curriculum have been improved. Thirdly, the content of the textbook emphasizes inquiry process as the 6th curriculum did. The 7th curriculum, however, more deeply deals with expecting and inferring. Finally, the analysis of illustration shows that the proportion of motive induction is high. This is also desirable approach to give students more interests in studying science.