• 한국자동차공학회논문집
• /
• 제14권4호
• /
• pp.99-106
• /
• 2006

High velocity oxygen-fuel thermal spray coating of the WC-Co cermet material is a well-established process for modifying the surface properties of the structural components exposed to the corrosive and wear attacks, and also these coating are well-known method to improve the fatigue strength of material. In this study, HVOF coated SM490B are prepared to evaluation of the effect of coating on tension and fatigue crack growth behavior. The pre-crack of the fatigue crack growth test specimens machined at deposited material area, heat affected zone and boundary, respectively. Through these test, the following results are obtained: 1) Tensile strength was about 498 MPa, and fracture occurred on base metal area. 2) The fatigue crack of coated specimens propagated more rapidly than non-coated specimen in all specimens. 3) In the same coating thickness specimens, the specimens with pre-crack at boundary more rapidly propagated than the specimens with pre-crack at HAZ and deposited material area. These results can be used as basic data in a structural integrity evaluation of rolled SM490B weldments considering HVOF coating.

• 한국해양공학회지
• /
• 제16권1호
• /
• pp.16-22
• /
• 2002

The diffusion characteristics of an ocean dumping material in the south-eastern East/Japan Sea related to regulate the physical characteristics with the observation and the hydraulic experiment are investigated. The main results are as follows; (1) Spying CTD observation result of the area of Jung in the East/Japan Sea, the ocean dumping area had influenced the Tsushima Warm Current of high temperature and salinity. Horizontal turbulent diffusivity is 1.913$\times$10$^{7}$ by drogue tracking. (2) From the experiment of settling, the initial settling velocity of each material is 1.0~2.7 cm/sec according to the specific gravity and initial concentration. In the pycnocline, particles didn't settle under the pycnocline any more and accumulated. It is signified that calculation of the sedimentation rate of the ocean dumping material including of vertical diffusion must be regard the pynocline in the ocean area have well-developed pycnocline. (3) Vertical turbulent diffusivity were 2.219$\times$10$^{-8}$ ~8.874$\times$10$^{-4}$ cm$^2$/sec from the experiment of settling. And, the pycnocline influenced the vertical turbulent diffusivity.

• 복합신소재구조학회 논문집
• /
• 제6권2호
• /
• pp.17-22
• /
• 2015

In this paper, we study the calculation for the fracture area of the composite material specimens using digital image processing techniques. This study was able to calculate the area of the fracture region through the main operation step 7 on the basis of improved image. To extract the area in the original image, we have to use opening operation, close operation, the Hit-or-Miss operation and Bottom hat filter, Top hat filter, etc. In particular, to extract the area of the composite specimen discussed in this study, we have to use the combination of the operations and filters because it is non-isotropic material, or should develop a new algorithm based on it.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2003년도 춘계공동학술대회논문집
• /
• pp.126-131
• /
• 2003

우리나라 서남권에 해당하는 서해안고속도로의 한 부분에 해당하는 전라북도 고창지역은 점토분이 많이 내포돼 있는 황토가 많다. 황토는 수박이나 고구마 같은 작물의 재배에는 양질의 토사이지만, 도로를 구축하기 위한 노상재료로 사용하는데는 원하는 강도값을 얻기가 힘들어 많은 애를 먹인다. 본 연구는 대상구간의 지역은 절토부의 노상재료가 원하는 재료의 품질기준을 충족시키지 못하였다. 노상층의 재료 특성을 보면, ＃200번체 통과량이 25∼82％정도이며 지하수위가 거의 노상면과 일치하여 자연함수비 과다로 시공시 노상토의 지지력 확보가 불가능한 것으로 판단되었다. 본 연구는 이와 같이 지지력이 부족한 현장에 적절한 절토부 노상지지력의 확보방안을 세워 원하는 공정을 추진함으로서 보다 안전하고 튼튼한 고속도로를 건설하는데 있다.

• 한국항해항만학회지
• /
• 제27권4호
• /
• pp.485-489
• /
• 2003

우리나라 서남권에 해당하는 서해안고속도로가 통과하는 전라북도 고창지역은 점토분이 많아 내포돼 있는 황토가 많다. 황토는 수박이나 고구마 같은 작물의 재배에는 양질의 토사이지만, 도로를 구축하기 위한 노상재료로 사용하는데는 원하는 강도값을 얻기가 힘들 토사였다. 이 연구 대상구간의 지역은 절토부의 노상재료가 원하는 재료의 품질기준을 충족시키지 못하였다. 노상층의 재료 특성을 보면, ＃200번체 통과량이 25～82％정도로 지하수위가 거의 노상면과 일치하여 자연함수비 과다로 시공시 노상토의 지지력 확보가 불가능한 것으로 판단되었다. 본 연구는 이와 같이 지지력이 부족한 현장에 적절한 절토부 노상지지력의 확보방안을 수립하여 원하는 공정을 추진함으로서 보다 안전하고 튼튼한 고속도로를 건설하는데 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.601-604
• /
• 1999

Electroluminescence(EL) devices based on organic thin films have attracted lots of interests in large-area light-emitting display. Recently, many EL researcher have interested a new emissive organic material. In this study, light-emitting organic electroluminescent devices were fabricated using Langmuir-Blodgett(LB) technique with new emissive organic material. This new emissive organic material were synthesis by our teams and we called PECCP [poly(3,6-N-2ethylhexyl carbazoly cyanoterephthalidene)] which has strong electron donor group and electron acceptor group in main chain repeat unit. This material has good solubility in common organic solvent such as chloroform. THF, etc. and has a good stability in air. In here, the new emissive material is applied to Langmuir-Blodgett(LB) method because our new material has a good stability in air. Optimum conditions of film deposition were examined by a surface pressure-area( $\pi$ -A) isotherms with various factors. The LB film were deposited on a indium Tin Oxide(ITO) glass. We were investigated by measuring current-voltage(I-V) characteristics. Also we were measured the UV/visible absorption at about 410nm and PL spectrum at about 530nm. We are attempt to the electroluminescence device properties of the new emissive material by Langmuir-Blodgett(LB) technique.

• 한국의상디자인학회지
• /
• 제6권1호
• /
• pp.34-45
• /
• 2004

The purpose of the study was to investigate weaving, traditional dyeing, fiber material, pattern how carpet developing according to Turkey area for using the data that can rear to the export strategic industry for carpet production and development that is correct in culture. The result are followed: 1) Life of the age was expressed in color and pattern using according to geographical environment, climate, lifestyle, religion etc. 2) In the case of weaving, there is Kilim, Soumak that appears only weft on the surface as plane weaving without knot and carpet of knotted pile weaving and knot of carpet is duplex knot difference with carpet of the other country. 3) In the case of textile material, there is use most wool fiber that can get easily from breeded sheep by nomads. 4) In the case of dyeing, did the local traditional color to use dye extracting in dyeing material that can get easily in the area. Red that can extract in madder that can get easily in which area of Turkey, dark navy blue of indigo dye that indigo plant fermentation and cream beige that is wool's natural color were exposed representative traditional color of Turkey carpet. 5) Pattern was advanced uniquely as culture of the area; weaving person's sensitivity and desire are reflected through centuries. Amulet, riches ＆ honors, fecundity and happiness appeared most pattern in any area.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.188-188
• /
• 2010

Recently, there has been increased incessantly an interest in research area on energy material for electronic and electric energy generation applications. The proposed material takes an unobtrusive operation into the simple displacing mechanism using chemical impact material. However, this material makes up a radical design, based on the operation of the stoichiometry ratio on the material architecture.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.180-185
• /
• 2001

In order to regulate the physical characteristics of an ocean dumping material in the south-eastern East Sea, the diffusion characteristics with the observation, hydraulic experiment and numerical experiment data are investigated. The main results are as follows; (1) Spying CTD observation result of the area of Jung in the East Sea, the ocean dumping area had influenced the Tsushima warm current of high temperature and salinity. Horizontal turbulent diffusivity is 1.913${\times}$10$^{7}$ $\textrm{cm}^2$/sec by drogue tracking. (2) From the experiment of settling, the initial settling velocity of each material is 1.0∼2.7 cm/sec according to the specific gravity and initial concentration. In the pycnocline, particles didn't settle under the pycnocline any more and accumulated. It is signified that calculation of the sedimentation rate of the ocean dumping material including of vertical diffustion must be regard the pycnocline in the ocean area have well-developed pycnocline. (3) Vertical turbulent diffusivity were 2.219${\times}$10$^{-8}$∼8,874${\times}$10$^{-4}$ $\textrm{cm}^2$/sec from the experiment of settling. And, the pycnocline influenced the vertical turbulent diffusivity. (4) From the result of diffusion simulation in the East Sea, the co-concentration line of 0.05 ppm and 0.1 ppm are limited at dumping area after 200 days. The constant concentration line of 0.01 ppm is distributed to the vicinity of Ulleungdo and Tokdo, but isn't distributed to the coastal area of East Sea and southern area of Jung in the East Sea.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.753-756
• /
• 2001

This research made a study of MnO$_2$electrode for supercapacitor with a diffuser (Polyvinyl alcohol). Manganese dioxide was used as active material. We tried to increase specific surface area by adding PVA. Manganese dioxide was synthesized by a sol-gel method using fumaric acid and oxalic acid in low temperature with high yield. Therefore, We prepared Manganese dioxide powder. This powder was used by active materials. The electrode was made by a mixture of active material, ketjen-black which is a large specific surface area, and PVdF-co-HFP as binder agent with using Nickel mesh as current collector. Here we reported on the synthesis and electrochemical performance of a enhanced material. All active materials have been submitted to X-ray diffraction and Scanning electron microscopy.