• 한국정보통신학회논문지
• /
• 제20권1호
• /
• pp.117-122
• /
• 2016

본 논문에서는 차량 추돌 방지 단거리 레이더용 24-GHz CMOS 고주파 전력 증폭기 (RF power amplifier)를 제안한다. 이러한 회로는 클래스-A 모드 증폭기로서 단간 (inter-stages) 공액 정합 (conjugate matching) 회로를 가진 공통-소스 단으로 구성되어 있다. 제안한 회로는 TSMC $0.13-{\mu}m$ 혼성신호/고주파 CMOS 공정 ($f_T/f_{MAX}=120/140GHz$)으로 설계하였다. 2볼트 전원전압에서 동작하며, 저전압 전원에서도 높은 전력 이득, 낮은 삽입 손실 및 낮은 음지수를 가지도록 설계되어 있다. 전체 칩 면적을 줄이기 위해 넓은 면적을 차지하는 실제 인덕터 대신 전송선(transmission line)을 이용하였다. 설계한 CMOS 고주파 전력 증폭기는 최근 발표된 연구결과에 비해 $0.1mm^2$의 가장 작은 칩 크기, 40mW의 가장 적은 소비전력, 26.5dB의 가장 높은 전력이득, 19.2dBm의 가장 높은 포화 출력 전력 및 17.2%의 가장 높은 최대 전력부가 효율 특성을 보였다.

• 산업기술연구
• /
• 제21권B호
• /
• pp.67-74
• /
• 2001

According as the patterns of PCB (Printed Circuit Board) become denser and complicated, quality and accuracy of PCB influence the performance of final product. It's attempted to obtain trust of 100% about all of parts. Because human inspection in mass-production manufacturing facilities are both time-consuming and very expensive, the automation of visual inspection has been attempted for many years. Thus, automatic visual inspection of PCB is required. In this paper, we used an algorithm which compares the reference PCB patterns and the input PCB patterns are separated an object and a scene by filtering and edge detection. And than compare two image using pattern matching algorithm. We suggest an defect inspection algorithm in PCB pattern, to be satisfied low cost, high speed, high performance and flexibility on the basis of $640{\times}480$ binary pattern.

• 제어로봇시스템학회논문지
• /
• 제5권3호
• /
• pp.363-369
• /
• 1999

In this paper, we design the robust $H_{\infty}$ controller for water level control of steam generator using a mixed $H_{\infty}$ optimization with model-matching method. Firstly we choose the desired model which has good disturbance rejection performance. Secondly we design a stabilizing controller to keep the model-matching error small and also provide sufficiently large stability margin against additive perturbations of the nominal plant. Simulation results show that proposed robust $H_{\infty}$ controller at specific power operation has satisfactory performances against the variations of load power, steam flow rate, primary circuit coolant temperature, and feedwater temperature. It can be also observed that the proposed robust $H_{\infty}$ controller exhibits better robust stability than conventional PI controller.

• 전자공학회논문지A
• /
• 제32A권1호
• /
• pp.166-178
• /
• 1995

An accurate threshold voltage extraction scheme for MOS transistors is presented. In contrast to alternative methods recently reported in the literature, this scheme does not need matched replica of the transistor under test, and thus can be applied more effectively and accurately to raal-time on-chip applications where threshold voltage measurements are required for many transistors with various geometries and bias conditions. The proposed scheme is accurately implemented in a matching-free way using a ratio-indepentent switched-capacitor subtracting amplifier and a dynamic current mirror. Nonideal effects associated with these circuits have been investiggated and compensated.

• 전자공학회논문지B
• /
• 제31B권9호
• /
• pp.76-84
• /
• 1994

This paper presents a new high-performance VLSI architecture and VLSI implementation for full-search block matching algorithm. The proposed VLSI architecture has the feature of two directional parallel and pipeline processing, thereby reducing the PE idle time at which the direction of block matching operation within the search area is changed. Therfore, the proposed architecture is faster than the existing architectures under the same clock frequency. Based on HSPICE circuit simulation, it is verified that the implemented procesing element is operated successfully within 13 ns for 75 MHz operation.

• 한국통신학회논문지
• /
• 제22권5호
• /
• pp.974-980
• /
• 1997

The 23GHz 1-state LNA was designed by using MPIE numerical analysis and conventional design EEsof softwares. The circuit was designed using conventional tools but analyzed and modified by using numerical MPIE tools. he matching sections was designed with parallel coupled filter-type, which gives impedance matching and DC blocking and has small discontinuities. THe FET chip is directly attached to the graound metal. The designed LNA gives 5.8dB gain and 2.5dB noise figure withoug considering the loss and impedance shift of connectors that degenerate the gain and noise figure considerably. this results gives very promising characteristics for our design process and matching schemes and fabrication technologies.

• 대한전자공학회논문지TC
• /
• 제43권3호
• /
• pp.68-77
• /
• 2006

본 논문에서는 4.5-5.5GHz 저잡음 증폭기 (low noise amplifiers, LNAs)를 위한 새로운 구조의 검사용 설계(Design-for-Testability, DfT) 회로를 제안한다. 이러한 검사용 설계회로는 고가의 장비를 사용하지 알고도 저잡음 증폭기의 전압 이득, 잡음 지수, 입력 임피던스, 입력 반사 손실 및 출력 신호대 잡음 전력비를 측정한다. 검사용 설계회로는 $0.18{\mu}m$ SiGe 공정을 이용하여 설계되었으며, 입력 임피던스 정합과 직류 출력 전압 측정을 이용한다. 이러한 회로를 이용한 회로 검사 기술은 검사 방법이 간단하고 검사하는데 드는 비용이 저렴하다.

• 조명전기설비학회논문지
• /
• 제24권12호
• /
• pp.38-46
• /
• 2010

For the development of 100[W] stage lighting, quantitative and uniform color mixing that applied through color adopted Simple-Inverse matching so that color mixing can be possible along Black Body Locus. R,G,B(Red, Green, Blue) LED(Light Emitting Diode) arrangement through LED package character analysis, LED module, and the characteristic of device were considered for uniform color mixing. A distance changeable optical device was built to assure high uniformity and high diffusion of not only the middle of diffusion side but also the border side. Also, we developed the control power circuit that can expand up to 6 channels which are possible for quantitative color mixing, and the high uniformity and high quantified border light for color mixing control and the verification of color mixing characteristics by composing GUI(Graphical user interface) including color mixing simulator. By presenting the experimental results of light color control, we proved the usefulness of our developed border light and the proposed color mixing method.

• 한국측량학회지
• /
• 제32권6호
• /
• pp.591-597
• /
• 2014

A wide variety of image application methods, such as aerial image, terrestrial image, terrestrial laser, and stereo image point are currently under investigation to develop three-dimensional 3D geospatial information. In this study, matching points, which are needed to build a 3D model, were examined under diverse weather conditions by analyzing the stereo images recorded by closed circuit television (CCTV) cameras installed in the U-City. The tests on illuminance and precipitation conditions showed that the changes in the number of matching points were very sensitively correlated with the changes in the illuminance levels. Based on the performances of the CCTV cameras used in the test, this study was able to identify the optimal values of the shutter speed and iris. As a result, compared to an automatic control mode, improved matching points may be obtained for images filmed using the data obtained through this test in relation to different weather and illuminance conditions.

• 한국전자파학회논문지
• /
• 제8권1호
• /
• pp.52-60
• /
• 1997

MPIE 수치해석적 기법과 초고주파대 CAD 소프트웨 어 인 EEsof를 활용하여 2단 23 GHz대 저잡음 증폭기를 설계하였다 이 회로는 먼저 EEsof를 이용하여 기초 설계를 하고 MPIE 기볍에 의해 수정과 상세 해석을 실시 하는 방법으로 하였다. 입.출력단의 정합 부분은 평행 결합 여파기 형태로 하였는데 이는 임피던스 정합과 DC 차단을 동시에 실시할 수 있을 뿐만 아니라 불연속 부분이 적고 설계시 해석의 오차가 적은 장점을 가지고 있다. FET칩은 접지 급속 변에서 직접 부착하였다. 제작된 증폭기는 이득이 콘넥터 손실 1.8 dB를 고려하지 않은 상태에서 15.2 dB, 잡음지수가 2.7 dB를 나타냈다. 이와 같은 결과는 본 논문에서 사용한 설계 기법과 정합 기술이 20 GHz대 이상의 회로설계 및 제작에 적합하다고 할 수 있다.