• Geomechanics and Engineering
• /
• v.8 no.6
• /
• pp.845-857
• /
• 2015

The 3D numerical analysis is carried out to investigate the settlement behavior of flexible mat foundations subjected to vertical loads. Special attention is given to the improved analytical method (YS-MAT) that reflects the mat flexibility and soil spring coupling effect. The soil model captures the stiffness of the soil springs as well as the shear interaction between the soil springs. The proposed method has been validated by comparing the results with other numerical approaches and field measurements on mat foundation. Through comparative studies, the proposed analytical method was in relatively good agreement with them and capable of predicting the behavior of the mat foundations.

• Geomechanics and Engineering
• /
• v.13 no.5
• /
• pp.757-774
• /
• 2017

The subgrade reaction modulus of a large mat foundation was investigated by using a numerical analysis and a field case study. The emphasis was on quantifying the appropriate method for determining the subgrade reaction modulus for the design of a flexible mat foundation. A series of 3D non-linear FE analyses are conducted with special attention given to the subgrade reaction modulus under various conditions, such as the mat width, mat shape, mat thickness, and soil condition. It is shown that the distribution of the subgrade reaction modulus is non-uniform and that the modulus of subgrade reaction at both the corners and edges should be stiffer than that at the center. Based on the results obtained, a simple modification factor for the subgrade reaction modulus is proposed depending on the relative positions within the foundation in weathered soil and rocks.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2007.06a
• /
• pp.253-253
• /
• 2007

• International Journal of Industrial Entomology and Biomaterials
• /
• v.34 no.2
• /
• pp.32-37
• /
• 2017

The purpose of this study was (1) to demonstrate the anti-microbial properties of 4-hexylresorcinol (4HR) loaded silk mat and (2) comparison of bone formation between 4HR incorporated silk mat and collagen membrane. Anti-microbial properties of 4HR incorporated silk mat was done after sterilization of silk mat (autoclaving and ethylene oxide gas). For the evaluation of bone formation, bilateral bony defects (size: 8 mm) were prepared in the parietal bone of the rabbits (n=10). 4HR incorporated silk mat (size: $10{\times}10mm$) was applied on the right defect. For the comparative purpose, the same size of commercial collagen membrane was applied on the left defect. The anti-microbial properties of 4HR incorporated silk mat were maintained after sterilization process. When compared bone mineral density and bone volume, there was no statistically significant difference between groups at 4 weeks and 8 weeks after operation (p>0.05). In conclusion, 4HR incorporated silk mat could be autoclaved without concern of anti-microbial properties loss. In addition, 4HR incorporated silk mat showed similar bone regeneration to collagen membrane. Therefore, 4HR incorporated silk mat might be considered for the application of open membrane technique.

• The Plant Pathology Journal
• /
• v.15 no.3
• /
• pp.131-136
• /
• 1999

In fungi known as ascomycetes, ability to mate is controlled by a single mating type (MAT) locus with two dissimilar sequences called idiomorphs carrying genes encoding transcription factors that are unrelated to each other. Fungi requiring strains with different MAT genes to complete the sexual process are heterothallic (self-sterile); species in which as single strain is able to undergo sexual reproduction are homothallic (self-fertile). Previous analysis of sequences from several heterothallic and homothallic species of the ascomycete genus Cochliobolus showed that homothallics evolve from heterothallics and that each known Cochliobolus homothallic species arose independently, from a different heterothallic ancestral species. Here we report detailed comparative analyses of MAT sequences ad their flanking regions, and show that: (1) The level of MAT gene similarity is not correlated with reproductive life style; (2) MAT proteins from all Cochliobolus species are conserved within the transcription factor signature sequences; they are not conserved in the carboxy terminal half of MAT-1, or third of MAT-2, except in those from very closely related species; (3) A gene (ORF1) of unknown function, consistently found on the MAT flank, is more conserved than are the MAT genes themselves; (4) The intergenic sequences diverge sharply among species.

• Weed & Turfgrass Science
• /
• v.4 no.1
• /
• pp.18-25
• /
• 2015

A universal DNA barcoding for agricultural noxious weeds is a powerful technique for species identification without morphological knowledge, by using short sections of DNA from a specific region of the genome. Two standard barcode markers, chloroplast rbcL and matK, and a supplementary nuclear ribosomal Internal Transcribed Spacer (ITS) region were used to examine the effectiveness of the markers for Pooideae barcoding using 163 individuals of 29 taxa across 16 genera of Korean Pooideae. The rbcL and ITS revealed a good level of amplification and sequencing success while matK did not. Barcode gaps were 78.6% for rbcL, 96.2% for matK, and 91.7% for ITS, respectively. Resolving powers were 89.3% for rbcL, 92.3% for matK, and 79.1% for ITS. The matK obtained the best both barcode gap and resolving power. However, it should be considered not to employ matK for Pooideae barcode because of low rate of PCR amplification and sequencing success. As a single DNA marker, rbcL and ITS were reasonable for Pooideae barcode. Barcode gap and resolving power were increased when ITS was incorporated into the rbcL. The barcode sequences were deposited to the National Center for Biotechnology Information (NCBI) database for public use.

• Science of Emotion and Sensibility
• /
• v.15 no.2
• /
• pp.177-182
• /
• 2012

Automotive sub-mat carpet for convenience and comfort of floor administration is additional supplemented floor mat. Sub Mat Backing of the current vehicle's materials reclaimed rubber, PVC, etc. are used, but secondary rubber and PVC Backing have bad sound absorption. Also rubber is heavy too. Contact surfaces between PET staple fiber, PET non-woven, PVC backing and car's floor carpet was measured the coefficient of friction for each sub-mat's non-slip evaluation. A surface of PET non-woven sub-mat has the highest coefficient of friction. Each of sample was observed by optical microscope the contact surfaces before and after. Contact surfaces of PET staple fiber sub-mat was changed increasingly to non-woven. This fact is shown that the sub-mat would be tangled between its contact surface and top of the floor carpet. It is expected to be highly non-slip. In case of PET non-woven sub-mat had not different for contact surfaces between before and after. And PVC backing was shown lower non-slip than other samples. The result of optical microscope and coefficient of friction is seems to be related.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.907-909
• /
• 2003

We report a novel method of activation-annealing, named as induction annealing (IA). IA is realized by applying alternating electric field induced by alternatingmagnetic filed applied to the sample. We observed the enhanced kinetics of dopant activation by using IA.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.102-102
• /
• 2008

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.103-103
• /
• 2008