• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2005.11a
• /
• pp.189-192
• /
• 2005

The purpose of this study is to analyze space composition and size of the Master Zone in the apartment unit plan. For this, we analyzed 435 samples by searching web-sites of the 5 main construction companies. The major results of this study are as follows. 1) Master Zone is organized 4 spaces such as main room, bathroom and make-up & dress room. Six types of Master Zone are classified with the composition of 4 spaces. 2) The size of the Master Zone is increased in proportion to the square meter. But the range of the ratio is small range of fluctuation as 20%${\sim}$30%. 3)The size and ratio of the each spaces of the Master Zone are analyzed. The size of bedroom is increased but the ratio is decreased. The size of bathroom is increased but the ratio is regular as 4%${\sim}$5%. The size of make-up and dressing room is generally increased but the range of the size and ratio is the most extensive. Through this analysis and research, this study would be provied the basic data for actual housing planning and to contribute to future trends of apartment houses.

• Korean Institute of Interior Design Journal
• /
• v.20 no.5
• /
• pp.152-159
• /
• 2011

Housing construction companies have been providing master bedroom walk-in closet as a selling point in modest sized apartments as small as 74m$^2$. It is noticeable that master bedroom walk-in closet in apartments provided by public sectors showed much variety in its size. This study tries to set up the guide line of master bedroom walk-in closet size. It is quite reasonable to assume that the biggest space-occupiers in walk-in closet are blankets and clothing. The survey conducted in this study shows that the number of clothes people keep in their closet does not show any significant difference regardless of square footage of their apartments. 34.7% of respondent answered they keep about 50-60 clothes using coat hangers, where 20-30 of those are winter clothes. It is calculated the required optimum length of the walk-in closet is 3.8m$^2$. Considering the most popular longitudinal dimension of master bedroom, 3.9m, and the space needed to accommodate blankets, it can be concluded that the required length of storage in master bedroom walk-in closet is 2.1m. The length can be adjusted reflecting the length of the master bedroom.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.29 no.3
• /
• pp.177-182
• /
• 1993

In order to estimate the mesh selectivity master curves and the optimum mesh size, experiments were made by the cover net method with the cod-ends of the five different the opening mesh sizes(51.2mm, 70.2mm, 77.6mm, 88.0mm and 111.3mm). After that 163 hauling were performed and there by investigated, on the training vessel Saebada in the Southern Korean Sea and East China Sea from June 1991 to August 1992. In this report, the mesh selectivity master curves were fitted by using logistic function(S=1/(1+exp super(-(aR+b))), R=(L-L sub(0))/(M-M sub(0)) and the optimum mesh sizes were estimated from each master curve. In this case, a and b are the selection parameters, M is the mesh size of each experimental cod-end. L is body length, L sub(0) and M sub(0) is the distance from the coordinate origine to intersection of linear regression between 25% and 50% selection length. The results obtained are summarized as follows; 1. Trachurus japonicus: Mesh selectivity master curve parameters: a and b were 2. 25, -4.73 respectively and optimum mesh size was estimated to be 79.3mm. 2. Trichiurus lepturus: Mesh selectivity master curve parameters: a and b were 0.81, -3.17 respectively and optimum mesh size was estimated to be 64.5mm. 3. Photololigo edulis: Mesh selectivity master curve parameters: a and b were 1.30m, -4.10 respectively and optimum mesh size was estimated to be 89.9mm. 4. Todarodes pacificus: Mesh selectivity master curve parameters: a and b were 1. 35, -3.45 respectively and optimum mesh size was estimated to be 89.4mm.

• 한국해양학회지
• /
• v.28 no.1
• /
• pp.72-78
• /
• 1993

Sediment grain size was analysed and compared for standard solids and sediment samples using two different methods; SediGraph and MasterSizer. SediGraph results on sediment samples appeared as finer than those of MasterSizer, and the difference is great especially for biogenic siliceous ooze. The difference is maybe due to the following different points in two methods; pretreatment procedure, sample concentration, detachability on fine grains (about 1 um), and detection principle on nonspherical grains.

• Korean Institute of Interior Design Journal
• /
• no.12
• /
• pp.50-56
• /
• 1997

In the past thirty years, apartment house has been greatly developed and the housing supply has improved some degree. However, the fact is that interior space planning of apartment house still has a lot of problems. The purpose of this study is to research the change of interior room. The 160 examples of unit floor plan(40-85m2 i.e. 12.1py-25.7py) were selected and classified according to master bedroom type and living room area when was constructed by the city of Seoul and KNHC from 1970 to 1990. And then, the change of each area, size and ratio were analyzed and researched. The result of this research can be summarized as follows: 1. Size of unit floor plan was on the increase from 16.02py to 17.86py. 2. 2 bedroom type, master bedroom showed a rise of size and occupancy ratio. Living room grew larger than 1982-1991 for size and occupancy ratio. 3. 3 bedroom type, master bedroom was increased in size and occupancy ratio was reduced to 19.99%. Size of living room became broader than master bedroom and occupancy ratio(1972-1981) increased over 1982-1991. Through this analysis and research, this study is to provide the basic data for actural design process and to suggest future trend of apartment house.

• Restorative Dentistry and Endodontics
• /
• v.27 no.1
• /
• pp.66-76
• /
• 2002

The purpose of this study is to evaluate the effectiveness of customized master cone on apical sealing in various apical size of prepared root canals, that is MAF(Master Apical File) and to know at which apical size the apical leakage is to be significantly reduced using customized master cone. 120 extracted single rooted premolars were divided into four groups according to their apical size(MAF), #30, 40, 50 and 60. And then, each group was subdivided into three in accordance with three obturation methods, lateral condensation with standardized master cone, lateral condensation with chloroform-dipped customized master cone, and continuous wave of obturation technique. Resorcinol-formaldehyde resin was used for the microleakage test of this study. Teeth were sectioned horizontally at 1.5mm(Level 1), 2.5mm(Level 2), and 3.5mm(Level 3) from the anatomical root apex using low speed microtome. All sections were examined under $\times$40 magnification with a stereomicroscope, photographed, and then scanned. With the scanned images, resin-infiltrated area presenting the microleakage was calculated using SigmaScan/Image, and the ratio of leakage to the total root canal area of each group was analyzed statistically(one way ANOVA). The results were as follows ; 1. In groups of MAF #30, there was no significant difference of mean leakage ratio among three obturation methods at all three levels. 2. In groups of MAF #40, the group using lateral condensation with customized master cone had the low-est mean leakage ratio at all three levels, but there was no significant difference among three obturation techniques. 3. In groups of MAF #50, the mean leakage ratio of the group using lateral condensation with standard master cone was the highest among those of three obturation techniques at level 1, and this difference was statistically significant(p<0.05). 4 In groups of MAF #60, the groups using lateral condensation with standard master cone had also the highest mean leakage ratio at all levels, but there was no significant difference at level 1 and 2. At level 3, the leakage of the group using lateral condensation with standard master cone was significantly higher than that of the group using continuous wave of obturation(p<0.05). The results of this study suggested that the obturation method using customized master cone or the continuous wave of obturation is more effective for apical sealing than that using standardized master cone when MAF is larger than ＃50.

• Journal of Fashion Business
• /
• v.12 no.3
• /
• pp.136-152
• /
• 2008

The purpose of this study was to provide dress forms and jacket blocks for adult males based on the analysis of their somatotypes. As the result of the research conducted for this study that was based on 1290 males of 20 to 54 years-old, the shapes of adult male were 20 and each body shape was classified by size factor, height and chest girth. Also, master sizes were selected considering appearance frequency. XS type (master size: height 165cm and chest circumference 88cm), Yd type (master size: height 170cm and chest circumference 91cm), YI and AD2 types (master size: height 170cm and chest circumference 94cm) were selected to develop dress forms and their jacket blocks in this study. The procedure and results were follows; 1. The dress forms of XS, Yd, YI and AD2 types were produced base on means of 61 body measurements and cross sections of shoulder, chest, waist, hip of subjects belong to each somatotype. 2. New jacket blocks for XS, Yd, YI and AD2 types were developed based on the body surface developments through draping and the results of comparative investigation on the existing jacket blocks by wearing test. Also the drafting methods of new jacket blocks were provided. 3. The sensory evaluation by wearing test showed that the developed jacket blocks were estimated more highly in terms of chest's allowance, the front width's allowance, neck wrinkle, front allowance and overall appearance's fitness items than existing jacket blocks.

• Journal of the Korean housing association
• /
• v.10 no.4
• /
• pp.71-81
• /
• 1999

The purpose of this study is to propose a way of making the master's space of the apartment suitable for new housing need. This study is to research the typology of master's space which is one of the major component of apartment plan. And also transition of the typology and size of master's space were analyzed. The 895 examples of unit floor plan were selected and classified according to the net area. The object of this study is the apartment plan which were constructed in Seoul, Il-san and Bun-dang and whose area is above 100 ㎡. Through this analysis and research, this study is to provide the basic data for actual design process and to suggest future trends of apartment houses.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.6
• /
• pp.483-486
• /
• 2005

The relationship between the EFBH (Equivalent Flat-Bottom Hole) size measured by non-destructive method and the actual size by destructive method in many rotors manufactured at Doosan Heavy Industries & Construction Co. Ltd. was investigated. In this investigation. "the Master Curve" compensating the differences between UT reported sizes and actual sizes of defects in our rotor forgings were obtainable. The applicability of this "Master Curve" as a way of calculating the actual defect size was also investigated. For the evaluation of rotor forgings, it is expected that this "Master Curve" may be used to determine the accurate actual sizes of defects.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.985-989
• /
• 1990

This paper presents a fundamental study of a millimeter-sized master-slave robot driven by conduit-guided wires, which is expected to be applied to the delicate surgical operations, the assembling precise and small parts and so on. This system consists of a millimeter-sized slave robot and a master manipulator of which the size is adapted to a human finger. Displacement and torque of the master side can be reduced and transferred to the slave robot by controlling the motor torque against the master torque by feeding back tension signals. The master can feel the tensions by the motor torque. In this paper, the design method and making process of the master-slave system and the dynamical characteristic of displacement and torque control are proposed.