• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.5
• /
• pp.1025-1037
• /
• 2015

Flexible base isolation bearings that separate superstructure from ground have been widely used in the construction field because they make a significant contribution to increasing the fundamental period of the structure, thereby decreasing response acceleration transmitted into the superstructure. However, the established bearing devices installed to uphold the whole building give rise to some problems involved with failure and collapse due to lack of the capacity as modern structures are getting more massive and higher. Therefore, this study suggests new isolation bearings assembled with additional restrainers enabled to reinforcing and recentering, and then evaluates their performance to withstand the seismic load. The superelastic shape memory alloy (SMA) bars are installed into the conventional lead-rubber bearing (LRB) devices in order to provide recentering forces. These new systems are modeled as component spring models for the purpose of conducting nonlinear dynamic analyses with near fault ground motion data. The LRB devices with steel bars are also designed and analyzed to compare their responses with those of new systems. After numerical analyses, ultimate strength, maximum displacement, permanent deformation, and recentering ratio are compared to each model with an aim to investigate which base isolation models are superior. It can be shown that LRB models with superelastic SMA bars are superior to other models compared to each other in terms of seismic resistance and recentering effect.

• Journal of Digital Contents Society
• /
• v.19 no.6
• /
• pp.1185-1195
• /
• 2018

Industrial Control System (ICS) is a system that carry out monitoring and controls of industrial control process and is applied in infrastructure such as water, power, and gas. Recently, cyber attacks such as Brutal Kangaroo, Emotional Simian, and Stuxnet 3.0 have been continuously increasing in ICS, and these security risks cause damage of human life and massive financial losses. Attacks on the control layer among the attack methods for ICS can malfunction devices of the field device layer by manipulating control commands. Therefore, in this paper, we propose a mechanism that apply the SDN between the control layer and the field device layer in the industrial control system and to determine whether the control command is legitimate or not and we show simulation results on a simply composed control system.

• Korean Journal of Occupational Health Nursing
• /
• v.12 no.1
• /
• pp.31-38
• /
• 2003

This study is an attempt to analyze the physical load by the type of the nursing tasks at the neurosurgical ICU nurses through the quantitative analysis of the working postures by the type of the nursing tasks with the OWAS(Ovako Working Postures Analysis System). Data collection was conducted through the video recording of the 13 nurses working at the neurosurgical ICU. For the analysis of the work postures by the type of the nursing tasks, and were interviewed regarding the subjective degree of the difficulties with the work postures related to the tasks. Collected data was analyzed through the WinOWAS program. The results were as follows : AC3 or AC4 tasks among the 18 nursing tasks types are "occupied bed making and change of the patient gown", "back massage", "suction", "elimination management", "change of position", "adjustment of bed", "helping the patient to move","measurement of CVP"and "measurement of urine volume". It appears that these tasks are harmful to the musculoskeletal system and the improvement or change of the work is required. The results stated above indicate that improper working postures during the nursing tasks influence the musculoskeletal system. Therefore, making use of assistant devices for the improvement of the working environment at the nursing tasks, based on human technological diagnoses, is required regarding the duty types with massive work pressure known to be harmful to the musculoskeletal system among those performed by the nurses. And there is a need of the education about the employment and maintenance of the vocational back pain prevention.

• Journal of Korea Port Economic Association
• /
• v.20 no.2
• /
• pp.131-149
• /
• 2004

With trend of container ships becoming larger and faster, the environment surrounding ports in North-East Asia is rapidly changing. Korea's largest port of Busan processed more than 10 million 20- feet equivalent containers in 2003, surpassing the 10-million TEU mark for the first time in its three decades of operation. However, the Port of Busan , the world's third-largest port in 2002, was eclipsed by Shanghai since July in 2003. The first massive strike of truckers crippled the Korea's logistics system in May and in September, the Port of Busan suffered from the second strike of truckers and damage by a powerful typhoon. By contrast, the port of Shenzhen in China increased its container-processing volume by 39.9 percent to 10.65 million TEU in 2003, and Shanghai, which passed Busan in terms of container volume in the middle of last year, further consolidated its position as the world's No. 3 port with an annual volume of 11.28 million TEU. After all, Busan recorded an annual container volume of 10.40 million TEU, slipping to fifth in rankings in 2003 and Busan's bid to become a Northeast Asian hub has suffered a further setback as these chinese ports overtook the port of Busan. But the port of Busan is located in the main trunk liking North America, Europe and South-East Asia. Once the project of Busan Newport is accomplished and the railway between South and North Korea is connected to TCR and TSR, the Port of Busan will have the most potential to become the international logistics center as the starting point of the land and sea routes encompassing all over the world.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.2
• /
• pp.129-134
• /
• 2002

Operating the nuclear power generations safely is not easy way because nuclear power generations are very complicated systems. In the main control room of the nuclear power generations, about 4000 numbers of alarms and monitoring devices are equipped to handle the signals corresponding to operating equipments. Thus, operators have to deal with massive information and to analyze the situation immediately. If they could not achieve these task, then they should make big problem in the power generations. Owing to too many variables, operators could be also in the uncontrolled situation. So in this paper, the fault diagnosis system is designed using 2-steps neural networks. This diagnosis method is based on the pattern of the principal variables which could represent the type and severity of faults.

• Economic and Environmental Geology
• /
• v.45 no.2
• /
• pp.195-204
• /
• 2012

Biomineralization has been explored for geochemical cycles and microbial tolerance mechanisms to metal toxicity. Here, we are introducing NanoFermentation which enables economic, environmentally friendly, requiring low input energy, and scalable manufacturing of nano-dimensioned magnetite. We are also focusing on controlling factors of crystallite size which can determine superparamagnetism and ferrimagnetism. Controlling factors are such as microbial species, temperature, incubation time, medium composition, substituted elements and their concentration, precursor type, reaction volume, precursor concentration density and their combinations. Crystallite size distribution of biomagnetite depends on the balance between nuclei generation and crystal growth. Biomineralization will elucidate elemental cycles on earth crust and microbial ecology as well as it will be applied to material sciences and devices via massive production of nanomaterials.

• Journal of Korea Multimedia Society
• /
• v.13 no.12
• /
• pp.1832-1842
• /
• 2010

This paper introduces a new automatic processing system: "Contents Factory" for the mass production of contents. Through the contents factory, we provide an authoring environment to improve the usability and the efficiency in producing contents. The contents factory integrates recycling techniques for contents resources, contents development engines, authoring tools, and interfaces into a total processing system. Since it is multi-platform based including mobile devices as well as PCs, one can easily produce complete PC and mobile contents from raw resources. We produced an example, "Sejong square" via the contents factory in order to demonstrate its effectiveness and usability.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.1
• /
• pp.61-73
• /
• 2015

In order to respond quickly to security threats that are increasing fast and variously, security control personnel needs to understand the threat of a massive amount of logs generated from security devices such as firewalls and IDS. However, due to the limitations of the information processing capability of humans, it takes a lot of time to analyze the vast amount of security logs. As a result, there is problem that the detection and response of security threats are delayed. Visualization technique is an effective way to solve this problem. This paper visualizes the security log using the RGB Palette, offering a quick and effective way to know whether the security threat is occurred. And it was applied empirically in VAST Challenge 2012 dataset.

• Journal of Digital Contents Society
• /
• v.18 no.1
• /
• pp.149-158
• /
• 2017

Big data have been presenting us with exciting opportunities and challenges in economic development. For instance, in the agriculture sector, mixing up of various agricultural data (e.g., weather data, soil data, etc.), and subsequently analyzing these data deliver valuable and helpful information to farmers and agribusinesses. However, massive data in agriculture are generated in every minute through multiple kinds of devices and services such as sensors and agricultural web markets. It leads to the challenges of big data problem including data collection, data storage, and data analysis. Although some systems have been proposed to address this problem, they are still restricted either in the type of data, the type of storage, or the size of data they can handle. In this paper, we propose a novel design of a platform for collecting and analyzing agricultural big data. The proposed platform supports (1) multiple methods of collecting data from various data sources using Flume and MapReduce; (2) multiple choices of data storage including HDFS, HBase, and Hive; and (3) big data analysis modules with Spark and Hadoop.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.509-516
• /
• 2014

CRC feature in a high-speed semiconductor memory devices such as DDR4/GDDR5 increases the data reliability. Conventional CRC method have a massive area overhead and long delay time. It leads to insufficient internal timing margins for CRC calculation. This paper, presents a CRC code method that provides error detection and a real-time matrix type CRC. If there are errors in the data, proposed method can alert to the system in a real-time manner. Compare to the conventional method(XOR 6 stage ATM-8 HEC code), the proposing method can improve the error detection circuits up to 60% and XOR stage delay by 33%. Also the real-time error detection scheme can improve the error detection speed to agerage 50% for the entire data bits(UI0~UI9).