• 한국결정성장학회지
• /
• 제23권6호
• /
• pp.296-301
• /
• 2013

Carbon coils could be synthesized using $C_2H_2/H_2$ as source gases and $SF_6$ as an incorporated additive gas under the thermal chemical vapor deposition system. A 304-type stainless steel was used as a substrate with nickel powders as the catalyst. The surface of the substrate was pretreated using a sand paper or a mechanical drill to enhance the production yield of the carbon coils. The characteristics of the deposited carbon nanomaterials on the substrates were investigated according to the surface state on the stainless steel substrate. The protrusion induced by the grooves on the substrate surface could enhance the formation of the carbon nanomaterials having the coils geometries. The cause for the enhancement of the carbon coils formation by the grooves was suggested and discussed with the surface energies for the interaction between as-growing carbon elements. Finally, we could obtain the massive production yield of the carbon coils by the surface pretreatment using SiC sand papers on the several tens grooved stainless steel substrate.

• 한국통신학회논문지
• /
• 제17권7호
• /
• pp.749-757
• /
• 1992

본 논문에서는 maneuvering 하는 이동 표적을 실시간으로 추적하기 위한 보다 효과적인 접근 방법으로, 방대한 입력 표적 영상 데이터를 몇 개의 간단한 상관신호로 변환이 가능한 광 JTC(Joint Trasform Correlator)를 이용하여 실시간 이동 표적추적 시스템을 구현하였다. 실시간 구현을 위해 고해상도를 갖는 LCD(Liquid Crystal Display) 공간 광 변조기를 사용하여 광 JTC를 구성하고, 상관 첨두치의 배경 잡음에 대한 영향을 효과적으로 감소시키기 위한 이진화 방법으로 mean 방법을 사용하였으며, maneuvering하는 이동 표적에 대한 추적 실험을통해 광 JPC를 이용한 실시간 이동 표적 추적 시스템의 구현 가능성을 제시하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.461-462
• /
• 2006

A single-gap and single-gamma transflective liquid-crystal (LC) display using patterned vertical alignment (PVA) mode was designed. In the device, a vertical electric field drives a vertically aligned LC to tilt down to optimize polarization efficiency. Electrodes of transmissive and reflective area were patterned $22.5^{\circ}$ and $45^{\circ}$ with respect to the polarizer so that a tilt-down direction of the LC director was $22.5^{\circ}$ and $45^{\circ}$ in the reflective and transmissive regions, respectively. In the device, the cell gap was the same for both regions, and the gamma curve matched each other in both regions because tilt angle of LC director was the same according to the applied voltage. Moreover, the dark state was irrespective of the cell retardation value at normal direction, which was highly important in massive fabrications. The switching principle and electro-optic characteristics of the device are reported herein.

• 한국결정성장학회지
• /
• 제7권1호
• /
• pp.143-150
• /
• 1997

본 연구는 수소로 희석된 $B_2H_6$를 도판트 소스 가스로 사용하여 이온 질량 주입(ion mass doping)을 하였을 때 다결정 박막의 전기적 특성과 도판트의 활성화시 방사 손상(radiation damage)의 효과에 대하여 고찰하였다. 다결정 박막에서 보론(boron)의 SIMS 분석과 컴퓨터 시뮬레이션인 TRIM92를 비교해서 가장 주입 확률이 높은 이온의 종류는 $B_2H_x\;^+$(x=1, 2, 3‥‥) 형태의 분자 이온임을 알았다. 높은 에너지의 질량 이온 주입 결과 시간에 따라 변화하는 비정질화된 층의 분율이 다결정 박막 내에 연속적인 비정질 충으로 존재하였다. 주입 이온의 질량 분리가 일어나지 않는 이온 질량 주입법(ion mass doping technique)에 의해 비정질화는 유발된다. 손상된 시편의 중간 열처리 온도 범위에서 도판트 활성화 거동과 역 열처리(reverse annealing) 효과가 관찰되었다. 이와 같은 연구의 결과 p-채널 다결정 박막 트랜지스터의 오프 스테이트(off-state) 전류는 방사 손상(radiation damage)에 의존한다.

• 한국가스학회지
• /
• 제8권3호
• /
• pp.24-30
• /
• 2004

본 연구에서는 개선된 view cell 실험 장치를 통하여 가스 하이드레이트 생성 과정을 관찰하고 이의 동특성을 고찰하였다. 순수한 물과 촉진제로 음이온계 계면활성제를 미량 첨가한 물에 천연가스를 넣어 가스 하이드레이트를 생성 과정을 관찰하였다. 본 실험에서 사용한 276.65 K, 6 MPa 조건 상태에서는 충분한 지체 지연 시간이후 물에 순간 교반을 줌으로써 형성자 생성을 쉽게 유도할 수 있었다. 가스 하이드레이트 필름의 생성은 정적상태에서 가스와 접촉된 물의 표면에 생성되었다. 이는 육안으로 구분하기 어려운 매우 얇은 막이 수초 안에 물의 표면 전체를 덮는 선행과정과 이후 다시 육안관찰이 쉬운 필름층이 재생성되었다. 순수한 물에는 짧고 굵은 섬유 다발의 형태로 끝 부분이 둥글게 말려서 결정이 형성된 모습인 반면 촉진제를 넣은 경우 작은 섬유 다발 형태로 길게 생성되었고 다른 다발과 접촉되어 엉킨 결정 상상을 보였다.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1994년도 춘계학술대회 and 제3회 신약개발 연구발표회
• /
• pp.41-49
• /
• 1994

The most common conventional method of discovering a drug involves a massive screening of a large number of compounds in chemical libraries or in the extracts from natural sources such as plants or microbial broths followed by chemical modification of one or more active compounds to improve their properties as a drug. When the three-dimensional structure of the target molecule for which the drug is searched is known the drug discovery process can be significantly simplified, This is especially true when the three-dimensional structure of a complex between the target and a lead compound is known. In this lecture our experience on the structure-based drug design for human CDK2(cyclin-dependent protein kinase 2) will be discussed with special emphasis on the strength and weakness of this approach of drug discovery. The regulation of the activity of CDK2 plays an important role in the cell proliferation of normal and cancer cells.

• Journal of Biosystems Engineering
• /
• 제40권3호
• /
• pp.261-270
• /
• 2015

Purpose: Cold storage is the most popular method used to preserve highly perishable foods such as beef and fish. However, at refrigeration temperatures, the shelf life of these foods is limited, and spoilage leads to massive food waste. Moreover, freezing significantly affects the food's properties. Ice crystallization and growth during freezing can cause irreversible textural damage to foods through volumetric expansion, moisture migration induced by osmotic pressure gradients, and concentration of solutes,which can lead to protein denaturation. Methods: Although freezing can preserve perishable foods for months, these disruptive changes decrease the consumer's perception of the food's quality. Therefore, the development and testing of new and improved cold storage technologies is a worthwhile pursuit. Results: The process of maintaining a food product in an unfrozen state below its equilibrium freezing temperature is known as supercooling. As supercooling has been shown to offer a considerable improvement over refrigeration for extending a perishable product's shelf life, implementation of supercooling in households and commercial refrigeration units would help diminish food waste. Conclusions: A commercially viable supercooling unit for all perishable food items is currently being developed and fabricated. Buildup of this technology will provide a meaningful improvement in the cold storage of perishable foods, and will have a significant impact on the refrigeration market as a whole.

• Biomolecules & Therapeutics
• /
• 제29권5호
• /
• pp.527-535
• /
• 2021

Sclerostin (SOST), a regulator of bone formation in osteocytes, inhibits the canonical Wnt signaling by interacting with low-density lipoprotein receptor-related protein 5/6 (LRP5/6) to prevent Wnt binding. Loss-of-function mutations of the SOST gene caused massive bone outgrowth and SOST-null mouse exhibited a high bone density phenotype. Therefore, SOST has been suggested as a promising therapeutic target for osteoporosis. A few previous studies with X-ray crystallography identified the binding interfaces between LRP6 and SOST, but there are limitations in these studies as they used truncated SOST protein or SOST peptide. Here, we analyzed the conformational dynamics of SOST-LRP6 E1E2 complex using hydrogen/deuterium exchange mass spectrometry (HDX-MS). We examined the effect of the C-terminal tail of SOST on LRP6 conformation upon complex formation. HDX-MS analysis suggested a new potential binding interface for the C-terminal region of SOST that was missing from the previous crystal structure of the SOST-LRP6 E1E2 complex.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.842-848
• /
• 2013

Developments of Solid-State Gyroscopy during last decades are impressive and were based on thin-walled shell resonators like HRG or CRG made from fused quartz or leuko-sapphire. However, a number of design choices for inertial-grade gyroscopes, which can be used for high-g applications and for mass- or middle-scale production, is still very limited. So, considerations of fundamental physical effects in solids that can be used for development of a miniature, completely solid-state, and lower-cost sensor look urgent. There is a variety of different types of bulk acoustic (elastic) waves (BAW) in anisotropic solids. Shear waves with different variants of their polarization have to be studied especially carefully, because shear sounds in glasses and crystals are sensitive to a turn of the solid as a whole, and, so, they can be used for development of gyroscopic sensors. For an isotropic medium (for a glass or a fine polycrystalline body), classic Lame's theorem (so-called, a general solution of Elasticity Theory or Green-Lame's representation) has been modified for enough general case: an elastic medium rotated about an arbitrary set of axes. Travelling, standing, and mixed shear waves propagating in an infinite isotopic medium (or between a pair of parallel reflecting surfaces) have been considered too. An analogy with classic Foucault's pendulum has been underlined for the effect of a turn of a polarizational plane (i.e., an integration effect for an input angular rate) due to a medium's turn about the axis of the wave propagation. These cases demonstrate a whole-angle regime of gyroscopic operation. Single-crystals are anisotropic media, and, therefore, to reflect influence of the crystal's rotation, classic Christoffel-Green's tensors have been modified. Cases of acoustic axes corresponding to equal velocities for a pair of the pure-transverse (shear) waves have of an evident applied interest. For such a special direction in a crystal, different polarizations of waves are possible, and the gyroscopic effect of "polarizational precession" can be observed like for a glass. Naturally, formation of a wave pattern in a massive elastic body is much more complex due to reflections from its boundaries. Some of these complexities can be eliminated. However, a non-homogeneity has a fundamental nature for any amorphous medium due to its thermodynamically-unstable micro-structure, having fluctuations of the rapidly-frozen liquid. For single-crystalline structures, blockness (walls of dislocations) plays a similar role. Physical nature and kinematic particularities of several typical "drifts" in polarizational BAW gyros (P-BAW) have been considered briefly too. They include irregular precessions ("polarizational beats") due to: non-homogeneity of mass density and elastic moduli, dissymmetry of intrinsic losses, and an angular mismatch between propagation and acoustic axes.

• 자원리싸이클링
• /
• 제29권1호
• /
• pp.35-42
• /
• 2020

최근 인체 유해성이 높은 석면 함유 제품의 다량 폐기로 인해 석면 함유 폐기물(asbestos-containing waste: ACW)이 계속해서 발생하고 있으며, 매립지 부족 등의 이유로 석면 무해화 및 재활용 기술 개발이 요구되고 있다. 마이크로웨이브를 이용한 열처리는 석면 함유 폐기물 무해화에 가장 효율적인 방법이나 석면이 상온에서 마이크로웨이브를 흡수하지 않는 한계점을 가지고 있다. 본 연구에서는 상온에서 마이크로웨이브를 흡수하여 발열하는 무기 발열체인 SiC 플레이트 사이에 석면 함유 폐기물를 위치시킨 상태에서 마이크로웨이브 열처리를 진행하는 방법으로 석면 함유 폐기물를 무해화 하였다. 효율적인 열처리를 위하여 석면 함유 폐기물를 파쇄 및 분쇄 공정을 통해 분말화하여 무해화 열처리 실험을 진행 하였으며, 열처리 조건에 따른 무해화 특성을 파악하기 위하여 마이크로웨이브 열처리 온도와 시간 변수를 조절하였다. 열처리 후 석면 함유 폐기물는 XRD와 SEM을 이용한 결정구조 및 미세구조 분석을 통하여 무해화 특성을 분석 하였다. SiC 플레이트를 적용한 마이크로웨이브 열처리 방법은 단시간 내에 목표 온도까지 가열이 가능하며 최종적으로 1,200℃에서는 60분 이상, 1,300℃에서는 10 분 이상의 마이크로웨이브 열처리를 진행하였을 때 결정구조와 미세구조상에서 석면이 완전히 제거되는 것을 확인하였다.