• 한국전기화학회:학술대회논문집
• /
• 2003.07a
• /
• pp.89-95
• /
• 2003

Fuel processing is an enabling technology for faster commercialization under lack of hydrogen infrastructures. It has been reported that the development of novel catalysts that are active and selective for hydrocarbon reforming reactions. It has been realized, however, that with pellet or conventional honeycomb catalysts, the reforming process is mass transport limited. This paper reports the development of catalyst structures with microchannels that are able to reduce the diffusion resistance and thereby achieve the same production rate within a smaller reactor bed. These microchannel reforming catalysts were prepared and tested with natural gas and gasoline-type fuels in a microreactor (1-cm dia.) at space velocities of up to 250,000 per hour. These catalysts have also been used in engineering-scale reactors (10 kWe, 7-cm dia.) with similar product qualities. Compared to pellet catalysts. the microchannel catalysts enable a nearly 5-fold reduction in catalyst weight and volume.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.7 no.2
• /
• pp.33-41
• /
• 2007

This thesis aims at understanding Le Corbusier's architecture through study of proportion. Based on the analysis of these texts, four elements - geometry in the outline, diagonal regulation lines in the facade, arithmetic rhythm in the structure, composition in the inner space - were listed. Through these four proportional systems. ten houses of 1920's, designed by Le Corbusier were analysed. The Le Corbusier's proportional system can be classified by two different purposes ; aesthetics and utility standardization for the mass production was reflected. In the later period, the proportion system of 1920's has changed through the process of self-contradiction. But the concept of the golden section and the human scale was reflected on Modulor, which Le Corbusier created in 1940's. Therefore, Le Corbuiser's notion of proportion for harmony of architecture has consistent meaning throughout all of his works from the 1920's.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.3
• /
• pp.100-107
• /
• 2001

Miro propulsion device is a literally very small propulsion system The reason why such a small propulsion system is required is that micro satellites are considered as substitutions for conventional satellites to reduce cost; the fabrication of micro satellites enables us to produce mass production Microrockets have relatively high values of thrust/weight ratio due to the cube law; weight is proportional to volume and thrust is proportional to area. Accordingly, downsizing makes the ratio of thrust/weight ratio high However, conventionally ignorable facts are not negligible any more in small scale systems. for chemical micro rockets, downsizing causes lots of heat loss as surface to volume ratio increases, which results in the destruction of radical ions. For thrusters using plasma, the generation of strong magnetic field for plasma is very difficult. Also, in the aspect of flow dynamics, the effects of drag and viscosity are important parameters in low Re flows. When these problems are solved, micro propulsion systems can be commercialized and result in spin-off effects in many fields.

• Journal of Forest and Environmental Science
• /
• v.27 no.2
• /
• pp.61-72
• /
• 2011

Micropropagation is an alternative mean of propagation that can be employed in mass multiplication of plants in relatively shorter time. Recent modern techniques of propagation have been developed which could facilitate large scale production of true-to-type plants and for the improvement of the species using genetic engineering techniques in the next century. An overview on the in vitro propagation via meristem culture, regeneration via organogenesis and somatic embryogenesis is presented. The usefulness of the plants in commercial industry as well as propagation techniques, screening for various useful characteristics and the influence of different cultural conditions in the multiplication, rooting and acclimatization phases on the growth of tissue cultured plant discussed.

• Journal of Sensor Science and Technology
• /
• v.30 no.4
• /
• pp.210-217
• /
• 2021

Gas sensors based on semiconducting metal oxides have attracted considerable attention for various applications owing to their facile, cheap, and small-scale manufacturing processes. Hematite (α-Fe₂O₃) is widely considered as a promising candidate for a gas-sensing material owing to not only its abundance in the earth's crust and low price but also its chemical stability and suitable bandgap energy. However, only a few studies have been performed in this direction because of the low gas response and sluggish response of hematite-based gas sensors. Nanostructures present a representative solution to both overcome these disadvantages and exploit the desirable features to produce high-performance gas sensors. However, several challenges remain for adopting gas sensors based on metal oxide nanostructures, such as improving cost efficiency and facilitating mass production. This review summarizes the recent studies on gas sensors based on hematite nanostructures. It also provides useful insights into various strategies for enhancing the gas-sensing properties of gas sensors based on hematite nanostructures.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.18 no.5
• /
• pp.241-248
• /
• 2023

GAN (Generative Adversarial Networks) creates highly sophisticated counterfeit products by learning real images or text and inferring commonalities. Therefore, it can be useful in fields that require the creation of large-scale images or graphics. In this paper, we implement GAN-based game character creation AI that can dramatically reduce illustration design work costs by providing expansion and automation of game character image creation. This is very efficient in game development as it allows mass production of various character images at low cost.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.6
• /
• pp.447-447
• /
• 2023

This study aimed to convert underutilized moso bamboo into high-value added products such as fences, interior materials, lighting fixtures, and accessories. Green moso bamboo poles with a diameter of approximately 10 cm and a length of approximately 3.7 m were heat treated at 140℃ using a large-scale kiln. The processing time was meticulously adjusted through various stages, including pretreatment (6-8 hours at 60℃), cooking (8-10 hours at 100℃), steaming (26-30 hours at 120℃), heating (4-6 hours at 140℃), and finally, cooling (below 80℃). A meticulously designed heat treatment process has enabled efficient mass production of moso bamboo poles with improved qualities, including minimal splitting, moisture levels below 3%, and a specific gravity of 1.05. The focus of this study was to present the physical and drying properties, such as color, dimensional change, specific gravity, moisture content, and splitting, observed during the heat treatment process.

• Microbiology and Biotechnology Letters
• /
• v.42 no.2
• /
• pp.194-201
• /
• 2014

Clitocybin A is a novel anti-wrinkle cosmetic agent produced by the strain from a Korean native mushroom Clitocybe aurantiaca. In this study, fermentation, extraction, and purification conditions for a large scale production of clitocybin A were optimized, and its cytotoxicity and inhibition activity on the expression of matrix metalloproteinase-1 (MMP-1) were characterized. The mass production of anti-wrinkle agent was achieved according to the 300 L fermentation process with a fed-batch cultivation using the modified yeast-maltose (YM) broth, and a total of 12.5 kg of cell mass was obtained in a 120 L culture broth for 14 days. After extraction and purification, clitocybin A was identified by HPLC. The cytotoxicity of clitocybin A was examined by the MTT assay. When assayed at 100 and 200 ${\mu}g/ml$ concentrations, clitocybin A showed no cytotoxicity, demonstrating safety. The inhibition activity of clitocybin A on the expression of MMP-1 was examined against UV irradiation. Oleanolic acid (control group) showed a relatively low MMP-1 inhibiting activity (ca. 16.7%) at 10 ${\mu}g/ml$ and showed increased cytotoxicity at higher concentrations. In contrast, clitocybin A showed no cytotoxicity at 100 ${\mu}g/ml$, and exhibited a relatively high MMP-1-inhibiting activity (33.1%). These findings indicate that clitocybin A may be a safe and effective anti-wrinkle agent for use in functional cosmetics.

• Journal of Practical Engineering Education
• /
• v.14 no.1
• /
• pp.127-136
• /
• 2022

As manufacturing items have changed in various ways, changes in the mass production of small-scale small-scale production of multiple varieties have become commonplace. As a result, the method of the manufacturing site has also changed, and the "smart factory," which emphasizes the production efficiency aspect using automation lines and big data of factories, is in the spotlight according to the global market economy. The introduction performance of smart factories has a positive effect in terms of production efficiency and is drawing a steep upward curve. In addition to the positive aspects, the aspect that needs to be supplemented in the future is the support and cooperation of specialized smart equipment suppliers, but education on standardized smart factories and the relocation of existing manpower, education, evaluation, and creative production that robots cannot replace Various support measures are also needed for activities. In addition, continuous management and systematic education are required to enter the upper stage. Through the case of companies that have built smart factories, it is intended to emphasize the need for proper use of manpower and support management for settlement and maintenance after introduction and continuous on-the-job training through the comparison of productivity before and after introduction to ensure the effect continues.

• Resources Recycling
• /
• v.15 no.1 s.69
• /
• pp.12-19
• /
• 2006

Rice straw is one or the main renewable energy sources in Korea. Bio-oil is produced from rice straw with a lab-scale equipment mainly with a fluidized bed and a char removal system. It was investigated how the reaction temperature affected the production of bio-oil and the efficiency of a char removal system. To elucidate how the temperature depended on the production of bio-oil, experiments were conducted at $466^{\circ}C,\;504^{\circ}C\;and\;579^{\circ}C$, respectively. The mass balance was established in each experiment, and the produced gas and oil were analyzed with the aid of GCs and a GC-MS system. The char removal system is composed of a cyclone and a hot filter. Tn the experiments, we observed that the production of bio-oil was decreased with temperature, and the bio-oil contained very useful chemicals.