• 제목/요약/키워드: mass transfer coefficients

검색결과 360건 처리시간 0.03초

평판 표면에서 HFC32/HFC152a 혼합냉매의 풀 비등 열전달계수 (Pool Boiling Heat Transfer Coefficient of HFC32/HFC152a on a Plain Surface)

  • 강동규;이요한;정동수
    • 설비공학논문집
    • /
    • 제25권9호
    • /
    • pp.484-492
    • /
    • 2013
  • Nucleate pool boiling heat transfer coefficients (HTCs) are measured with HFC32/HFC152a mixture at several compositions. All data are taken at the liquid pool temperature of 7C, on a horizontal plain square surface of 9.53×9.53 mm, with heat fluxes of 10 kW/m2 to 100 kW/m2 with an interval of 10 kW/m2, in the increasing order of heat flux. Test results show that the HTCs of these mixtures are up to 45% lower than those of the ideal HTCs calculated by a linear mixing rule with pure fluids' HTCs, due to the mass transfer resistance associated with non-azeotropic refrigerant mixtures. Pool boiling data show the deduction in HTCs with an increase in GTD of the mixture. The present mixture data agree well with five well known correlations, within 20% deviation.

용매 추출법에 의한 분해경유중의 방향족 분리 -추출상중의 방향족의 역수출- (Separation of Aromatics in Light Cycle Oil by Solvent Extraction - Re-extraction of Aromatics in Extract Phase -)

  • 김수진;김덕현
    • 공업화학
    • /
    • 제8권6호
    • /
    • pp.967-972
    • /
    • 1997
  • 접촉분해경유(LCO)와 dimethylsulfoxide(DMSO)수용액의 평형추출로부터 얻어진 추출상을 원료로 사용한 역추출에 의해 추출상중의 방향족의 회수를 검토했다. 역추출 용매의 선정을 위해, Benzene, Toluene, m-Xylene(mX), n-Hexane(Hx)과 n-Octane(Ot)을 용매로 사용하여 추출상-용매간의 분배평형을 측정한 결과, 추출상중의 방향족의 회수면에서 Hx이 가장 적절한 용매이었다. 또, Hx을 용매로 사용하여 평형 역추출을 행해 방향족의 회수에 대한 조작인자의 영향을 검토했다. 방향족에 대한 분배계수는 용매/원료(추출상) 질량비(S/F)(S/F를 변화시켜 얻어진 추잔상 혹은 추출상중의 질량분율)에 관계없이 일정했으나 수율은 S/F가 증가함에 따라 증가했다. 조작온도는 방향족의 분배계수와 수율에 영향을 미치지 못했다. 나프탈렌류 성분(탄소수:10~12)간에는 탄소수가 많을수록 분배계수 및 수율이 컸다. 또한, 회분 교반조를 사용하여 역추출을 행해 방향족 성분의 물질이동 속도를 측정했다.

  • PDF

Condensation Heat Transfer and Pressure Drop of R-134a in the Oblong Shell and Plate Heat Exchanger

  • Park Jae-Hong;Kim Young-Soo
    • International Journal of Air-Conditioning and Refrigeration
    • /
    • 제12권3호
    • /
    • pp.158-167
    • /
    • 2004
  • Condensation heat transfer experiments were conducted with a oblong shell and plate heat exchanger without oil in a refrigerant loop using R-134a. An experimental refrigerant loop has been developed to measure the condensation heat transfer coefficient hr and frictional pressure drop Δpf of R-134a in a vertical oblong shell and plate heat exchanger. Four vertical counter flow channels were formed in the oblong shell and plate heat exchanger by four plates having a corrugated sinusoid shape of a 45 chevron angle. The effects of the refrigerant mass flux, average heat flux, refrigerant saturation temperature and vapor quality were explored in detail. Similar to the case of a plate heat exchanger, even at a very low Reynolds number, the flow in the oblong shell and plate heat exchanger remains turbulent. The results indicate that the condensation heat transfer coefficients and pressure drops increase with the vapor quality. A rise in the refrigerant mass flux causes an increase in the hrandΔpf. Also, a rise in the average heat flux causes an increase in the hr. But the effect of the average heat flux does not show significant effect on the Δpf. On the other hand, at a higher saturation temperature, both the hrandΔpf. found to be lower. Based on the present data, the empirical correlations are provided in terms of the Nusselt number and friction factor.

과냉각수조에서 증기응축 특성에 관한 실험적 연구 (Experimental Study on Characteristics of Steam Condensation in a Sub-cooled Water Pool)

  • 김환열;조석;송철화;정문기;최상민
    • 에너지공학
    • /
    • 제8권2호
    • /
    • pp.298-308
    • /
    • 1999
  • 과냉각수조로 분사되는 증기의 직접접촉 응축특성을 알아보기 위하여 다섯 개의 수평 노즐에 대해 증기 질량유량과 수조 온도를 여러 가지로 변화시키면서 실험적 연구를 수행하였다. 증기응축현상을 육안관찰과 고속 비디오 카메라를 사용한 방법으로 분석한 결과, 안정된 증기제트인 경우 증기 질량속과 수조온도가 변화함에 따라 타원형 및 원추형 증기제트 형상이 나타나는 것을 관찰하였다. 증기제트 팽창비, 증기제트 길이 및 응축연전달계수를 구하였고, 증기 질량속, 수조온도 및 노즐 내경이 미치는 영향을 분석하였다. 증기제트 길이와 응축열전달계수를 증기 질량속 및 응축추진 포텐셜의 함수로 나타낸 상관식을 구하였다. 증기제트 내부와 주위 수조온도 분포를 구했으며 증기 질량속, 수조온도 및 노즐 내경이 미치는 영향을 분석하였다. 처깅, 천이처깅, 응축진동, 안정응축, 방울응축진동 및 간헐진동응축 등 여섯 가지 영역으로 구분된 응축 영역도를 작성하였다. 그 외, 수조 벽면에서의 동압을 측정하였고, 증기 질량속과 수조온도에 따라 변화하는 증기 응축모드와 동압과는 밀접한 연관성이 있음을 확인하였다.

  • PDF

비분산 막-용매추출에 의한 유기오염물의 분리 (Separation of Organic Pollutants by Nondispersive Membrane-Solvent Extraction)

  • 유홍진;한성록
    • 한국산학기술학회논문지
    • /
    • 제5권2호
    • /
    • pp.174-185
    • /
    • 2004
  • 미세기공 중공사형 모듈을 이용한 비분산 막-용매 추출에 의하여 유기오염물을 페수로부터 분리하였다. 시스템은 향류 및 병류로 각각 진행되었으며, 분배계수의 비교로부터 MIBK가 분리용 용매로 선정되었다. 향류의 분리도가 병류보다 우수하였으며, 총괄물질전달계수도 구하였다.

  • PDF

고정화 세포에 의한 Fructo-oligosaccharides 생산 반응메카니즘에서 물질전달 영향에 대한 수학적 모델 (Modeling the effect of mass transfer on the kinetics of fructo-oligosaccharide production by immobilized cells)

  • 윤종원;전영중이민규송승구
    • KSBB Journal
    • /
    • 제8권3호
    • /
    • pp.266-271
    • /
    • 1993
  • Calcium Alginate gel에 고정화된 Aureobasidium pullulans cell을 이용한 fructo-이igosaccharides 생산 반응메카니즘에 있어서 포도당, sucrose 및 fructo-oligosaccharides의 유효확산계수를 구하고, 반응메카니즘에 대한 수학적 모벨을 제안하였다. 770g/, 860g/ 의 고농도 당용액에서 이들의 유효확산계수는 1.27.6×107cm2/s 범위로 매우 낮은 값을 보였고, 이 결과를 모댈식에서 적용하여 기질농도, bead 크기 및 첨가비율 등을 변화시키면서 실험적으로 검증해 본 결과 실험치와 모델식이 대체로 잘 일하였다.

  • PDF

수동적으로 냉각되는 하이브리드 휜들의 열성능에 대한 수치적 연구 (Numerical study on the thermal performance of passively cooled hybrid fins)

  • 전문수;김경준
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제37권8호
    • /
    • pp.816-821
    • /
    • 2013
  • 본 논문은 자연대류 상에서 수동적으로 냉각되는 다양한 하이브리드 휜들과 핀 휜의 열성능에 대한 수치연구결과를 보고한다. 연구된 하이브리드 휜들은 basic hybrid fin (BHF), hollow hybrid fin (HHF), solid hybrid fin (SHF) 이다. 다양한 방열율에 대한 HF들과 PF의 열성능을 조사하기 위해 CFD 휜 모델이 개발되었다. 휜들의 열성능은 각각의 휜에 대해 휜 베이스 면적에 대한 열전달계수, ha와 질량에 대한 열전달계수, hm 을 정량화하여 분석되었다. 연구결과는 SHF의 ha가 PF 보다 23% 더 큼을 보여주고, HHF의 hm은 PF 보다 무려 140% 더 크며, HHF의 질량기반 성능, 즉 hm은 BHF 보다 40% 더 우수함이 밝혀졌다.

겔 식품의 물질전달공정 중 확산량 예측모델 및 확산계수 (Diffused Quantity Prediction Model and Diffusion Coefficient of Gel Food in the Mass Transfer Process)

  • 이원영;최용희
    • 한국식품과학회지
    • /
    • 제23권2호
    • /
    • pp.217-223
    • /
    • 1991
  • Gel식품의 구조적 특성을 밝히는 일은 특수한 장치나 분석방법이 요구되어 왔으나 본 연구에서는 조작이 간편하고 확산식에 잘 맞는 농도의 해를 구할 수 있는 capillary method를 통해 확산량과 확산계수를 예측하였다. 확산량은 거리, 시간, agar% 농도를 독립변수로 하여 도시하고 추정된 몇 가지 함수식으로부터 SPSS 통계 package 중 regression program을 이용해 단순회귀시켜 R-square가 가장 높은 식을 채택하고 다시 각 독립변수에 대한 함수식을 이용해 다중회귀분석을 실시함으로써 최종 model식을 수립하였다. 기존의 확산계수 예측방법은 Fick의 제 2법칙의 해식으로부터 예측되는 것이 일반적이었으나 그 식이 난해하고 시간이 많이 걸려 본 연구에서는 좀 더 간편한 방법으로 확산계수를 구하고자 수치해석적 방법에 따라 확산계수를 예측하였으며 그 산술평균을 확산계수 D값으로 나타내었다.

  • PDF

회분식 제올라이트계에서 Cs 및 Sr의 이온교환속도 연구 (Ion Exchange Kinetics for Cs and Sr in a Batch Zeolite System)

  • 이일희;유재형;박현수
    • 공업화학
    • /
    • 제4권4호
    • /
    • pp.739-745
    • /
    • 1993
  • 본 연구에서는 제올라이트에 의하여 Cs 및 Sr을 분리하는 무기이온 교환계에 있어서 물질전달 특성을 규명하는데 중점을 두었다. Cs이온의 경우 선택도가 우수한 AW300 및 AW500 제올라이트, Sr이온의 경우는 4A, 13X 제올라이트를 각각 선정하여 물질전달실험을 수행하였다. 실험조건으로는 25C, 교반속도 300rpm, 제올라이트량 4g, Cs 및 Sr 용액의 농도, 부피는 각각 1000ppm, 2000ppm의 0.5에서 회분식의 이온교환 방식을 채택하였다. 물질전달속도는 경막내 확산에 의해 지배됨을 알았으며, 경막 내 물질 전달계수는 104103cm/sec, 입자내 겉보기 확산계수는 108cm2/sec의 차수를 나타내었다.

  • PDF

Development of a Mass Transfer Model and Its Application to the Behavior of the Cs, Sr, Ba, and Oxygen ions in an Electrolytic Reduction Process for SF

  • 박병흥;강대승;서중석;박성원
    • 방사성폐기물학회지
    • /
    • 제3권2호
    • /
    • pp.85-93
    • /
    • 2005
  • Isotopes of alkali and alkaline earth metals (AM and AEM) are the main contributors to the heat load and the radiotoxicity of spent fuel (SF) . These components are separated from the SF and dissolved in a molten LiCl in an electrolytic reduction process. A mass transfer model is developed to describe the diffusion behavior of Cs, Sr, and Ba in the SF into the molten salt. The model is an analytical solution of Fick's second law of diffusion for a cylinder which is the shape of a cathode in the electrolytic reduction process. And the model is also applied to depict the concentration profile of the oxygen ion which is produced by the electrolysis of Li2O. The regressed diffusion coefficients of the model correlating the experimentally measured data are evaluated to be greater in the order of Ba, Cs, and Sr for the metal ions and the diffusion of the oxygen ion is slower than the metal ions which implies that different mechanisms govern the diffusion of the metal ions and the oxygen ions in a molten LiCl.

  • PDF