• 한국수소및신에너지학회논문집
• /
• 제19권4호
• /
• pp.266-275
• /
• 2008

The performance improvement of each part for durability, safety and cost of high pressure storage system for fuel cell vehicle has been focused so far. However, for the mass production of fuel cell vehicle, it is necessary to evaluate durability and safety in system module and vehicle level. The test procedure to evaluate vibration and collision safety of high pressure hydrogen storage system for the fuel cell vehicle is established and its reliability is verified.

• 한국건축시공학회지
• /
• 제11권6호
• /
• pp.530-537
• /
• 2011

연구는 SHCC의 건축시공 현장적용을 목적으로 현장 제조설비인 배치플랜트 2-Shaft 믹서를 이용하여 SHCC 제조 및 타설을 통해 실부재 실험을 실시하고, 이를 실내실험 결과와 비교 검토함으로서 향후 SHCC의 현장적용을 위한 기초자료로 제시하고자 하였다. 그 결과, 실내 Omni 믹서와 2-Shaft 믹서에서 SHCC 제조시 인장강도는 유사하였지만, 변형률에서 Omni 믹서가 2.5 % 이상 우수하였다. 배치플랜트 3500 L 2-Shaft 믹서에서 제조된 SHCC의 경우, 실내 100 L 2-Shaft 믹서에서 제조한 SHCC에서 인장 성능이 보다 높게 나타났다. SHCC의 현장적용 확대를 위해서는 배치플랜트 현장 제조시 건비빔, 모르타르 비빔시간을 충분히하여 매트릭스를 균질성을 확보하고, 비빔단계에서 적절한 점성 및 유동성을 확보할 수 있는 다양한 방법을 고려해야 한다.

• 한국정밀공학회지
• /
• 제31권10호
• /
• pp.905-911
• /
• 2014

A Loss-in-Weight (LIW) feeder, a type of automated measuring device, is a continuous feeder used in many mass production industries. Due to its versatility, there have been constant demands of LIW feeders in food production supply lines as well as chemical and pharmaceutical industries. In this paper, the process of designing a LIW feeder system with better performance will be examined and compared with commercial products. This system is characterized by low pass Butterworth filter and feed forward PI control. The filter is for noise disposal caused by dynamic condition of a LIW feeder. The feed forward PI control, based on linearity feature of feeders, is adequate for stable driving of the system. At the end, a possible evaluation method of LIW system will be proposed to verify the specific achievement of this paper.

• 전기학회논문지
• /
• 제61권9호
• /
• pp.1242-1248
• /
• 2012

Electric vehicle usage is currently very low, but it will be increase with development of electric vehicle technology and a good government policy. Moreover in 2020, advanced electric vehicle manufacturing system will give high performance for its price and mass production. Electric vehicle will become widespread in Korea. From an operational and a planned viewpoint, the electric power demand should be considered in relation to diffusion of electric vehicles. This paper presents the impact of the various battery charge systems. A comparison is performed for electric vehicle charging methods such as, normal charging, fast charging, and battery swapping. In addition, economic evaluation for the replaceable battery system and the quick battery charging system is performed through basic information about charging Infrastructure installation cost. The results of the evaluation show that replaceable battery system is more economical and reliable in side of electric power demand than quick battery charging system.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권12호
• /
• pp.1749-1754
• /
• 2014

The current experiment was designed to evaluate the efficacy of adding the multi-enzyme mixture (Natuzyme) into layers' diets with different levels of energy and available phosphorus in relation to laying performance, egg qualities, blood cholesterol level, microflora and intestinal viscosity. Two hundred and fifty 43-wk-old Hy-Line commercial layers were divided into five groups with five replicates per group (10 birds per replicate) and fed one of five experimental diets. A corn and soybean meal-based control diet was formulated and used as a control diet. Two experimental control diets were formulated to reduce energy and crude protein contents (rE) or energy, crude protein and phosphorus contents (rEP). In addition, Natuzyme was added into either rE (rE-Natu500) or rEP (rEP-Natu500) diet to reach a concentration of 500 mg per kg of diet. The experiment lasted 8 weeks. There were no significant differences in feed intake, egg production, egg weight, egg qualities such as eggshell color or Haugh unit, total cholesterol, relative organ weights and cecal microflora profiles between any dietary treatments. Natu500 supplementation into the rE diet, but not rEP diet significantly increased egg mass and eggshell qualities such as strength and thickness, but it decreased cecal ammonia concentration and intestinal viscosity in laying hens. In conclusion, the present study shows that adding multiple enzyme preparation could improve performance of laying hens fed energy and protein restricted diets.

• Composites Research
• /
• 제19권3호
• /
• pp.7-14
• /
• 2006

본 논문에서는 내압 하중을 받는 복합재 압력 용기의 신뢰도를 구하기 위해 확률적 강도 해석이 수행되었다. 이때 확률적 강도 해석은 점진적 파손 모델과 몬테카를로 시뮬레이션으로 구성된 확률 연속 파손 모델과 상용 유한 요소 해석 코드인 ABAQUS가 연계한 형태로서 복잡한 형상 및 경계 조건을 갖는 복합재 구조물의 확률적 파손 해석을 수행하게 된다. 설계확률 변수로서 복합재 층의 각 방향 별 강도가 고려되었다. 최종적으로, 확률 강도 해석을 통해 복합재 압력 용기의 파열 압력 분산 현상이 설명되었고, 복합재 압력 용기의 각 부위별 신뢰도 값이 제시되었다. 양산 중인 복합재 구조물인 경우, 재료 및 제작 공정의 불확실성이 구조물 성능에 미치는 영향이 더욱 커지게 되어 확률 강도 해석을 이용한 구조 설계가 필수적이다.

• 한국산학기술학회논문지
• /
• 제20권5호
• /
• pp.56-65
• /
• 2019

최근 자동차는 안전성, 편리성, 친환경 등의 목적으로 개발되고 있다. 특히, 자동차 안전성에 대한 인식이 중요하게 바뀌고 있다. 이에 따라, ADAS 개발로 인한 안전 시스템들이 등장하였다. 그러나 ADAS의 개발과 시험 평가를 통해 양산 되는 기간은 상당히 오래 걸린다. 따라서 본 논문에서는 ADAS 개발과 시험 평가에 필요한 기간을 단축시키기 위해 브레이크 다이나모미터를 개발 하였다. 또한 개발한 브레이크 다이나모미터는 국제 표준인 JIS D-0210을 만족하며, ADAS의 모드별로 사용자가 시험 조건과 시험 방법을 선택 하여 제동력을 평가할 수 있다. 그리고 개발하는 브레이크 다이나모미터의 신뢰성 검증을 위해 선행 연구에서 제안한 ACC, LKAS, AEB의 시나리오를 사용하였다. 개발한 브레이크 다이나모미터는 시험값과 선행 연구를 통해 제안된 ADAS 모드별 이론식에 의한 계산값을 비교하여 신뢰성을 검증하였다. 또한, 향후에는 ADAS의 실차시험이 불가능한 환경에서 ADAS 모드별 브레이크 부품의 성능 평가가 가능할 것으로 기대 된다.

• Journal of Information Display
• /
• 제6권3호
• /
• pp.18-21
• /
• 2005

A new technology for reducing photolithography process from a four step to a three step process in the fabrication of TFT LCD is introduced. The core technology for 3-mask-TFT processes is the lift-off process [1], by which the PAS and PXL layers can be formed simultaneously. A different method of the lift-off process was developed in order to enhance the performance of efficiency with conventional positive and not negative PR which is the generally used in other lift-off process. In addition, the removal capacity of the ITO/PR in lift-off process was evaluated. The evaluation results showed that the new process can be run in conventional TFT production condition. In order to apply this new process in existing TFT process, several tests were conducted to ensure stability of the TFT process. It was found that the outgases from PR on the substrate in ITO sputtering chamber do not raise any problem, and the deposited ITO film beside the PR has conventional ITO qualities. Furthemore, the particles that were produced due to the ITO chips in PR strip bath could be reduced by the existing filtering system of stripper. With the development of total process and design of the structure for TFT using this technology, 3-mask-panels were achieved in TN and IPS modes, which showed the same display performances as those with the conventional 4mask process. The applicability and usefulness of the 3-mask process has already verified in the mass production line and in fact it currently being used for the production of some products.

• 한국정밀공학회지
• /
• 제21권9호
• /
• pp.135-141
• /
• 2004

Anti-shock performance is one of the most important design specifications of TFT-LCD modules. Since they are adopted fur major display units of many mobile applications such as lap-top PCs, cellular phones, and palm pilots, they are able to accommodate and endure high level transient mechanical energy inputs. For the reasons, not only the LCD unit manufacturers but their customers like PC makers perform a series of strict impact/drop test on the units. Currently, designers are mostly relying on their own trial-error based experience for the anti-shock design. Thus those designs depending on only experience may result in disqualification from the drop/impact test during final product evaluation. Those shock failures of any new designs are prohibitive for both LCD and PC manufacturers. In order to avoid this problem, many designers are focusing on the development of computer-aided design tools that is directly connected to shock simulation capabilities and then shock-proof design cycle time could be significantly reduced. Development of an integrated CAE system for the shock-proof design is presented in this article. At every stages of the development of present work, practical industrial applicability and mass production feasibility are seriously considered and tested so that the system is to be used in the LCD design engineering field.

• 연구윤리
• /
• 제2권1호
• /
• pp.1-6
• /
• 2021

The aims of this study were to examine the causes and types of the most common and serious fraudulent authors among research misconduct, and to examine ways to reduce the mass production of unjust authors. In scientific research, it is universal and efficient to have multiple authors participate. This is because each author group consisting of a team has its own expertise, and most of them participate in research in a complementary way to maximize the research effect. However, the competition for achievements between researchers, the quantitative evaluation system of universities, and the social atmosphere of performance-oriented are tempting researchers to abandon research ethics. In this study, in relation to the research ethics of existing researchers, the contents of research ethics by a few countries such as United States, United Kingdom, Germany, Canada, Australia etc. and the situation in Korea was examined as well. In addition, the types and causes of domestic unfair authors in Korea were investigated intensively. In conclusion, in order to no longer produce unfair authors such as compulsory authors, honorary authors, mutually supported authors, and duplicate authors, which researchers unknowingly recognize as co-authors, reinforcement of research ethics education and national organization and system should be supported.