• Journal of Environmental Health Sciences
• /
• v.36 no.5
• /
• pp.343-350
• /
• 2010

This study was performed to investigate laboratory workers' exposures to airborne nanoparticles at a university laboratory where acid treatment experiments were conducted on the surfaces of engineered carbon nanotubes (CNTs). The surface area concentrations, number concentrations, and mass concentrations of airborne nanoparticles were measured at personal breathing zones (PBZs) for various tasks using direct reading instruments. For all three metrics, airborne nanoparticle concentrations during the experiments were higher than background levels measured before and after the experiments for all three metrics. Among the various tasks that were performed as part of these experiments, one task that involved filtering a mixture of acid and CNTs showed the highest concentrations in all three metrics, with concentrations of $116.6\;{\mu}m^2$/cc, 24320 pt/cc, and $9.0\;{\mu}g/m^3$, respectively. Nanoparticle surface area concentrations measured at a representative area fluctuated with those at the PBZs in the laboratory. This result indicates that nanoparticles generated during the experiments were not just limited to the PBZs of the workers but were also present throughout the room, potentially exposing co-located workers. CNTs were detected by a transmission electron microscope in an air sample collected while handling the CNTs. All the tasks were performed inside fume hoods, with the sliding sashes open to their required heights. It was noted that the capture velocities of the fume hoods were much lower than the American National Standards Institute (ANSI)'s recommendation level (0.4 to 0.6 m/s). In conclusion, this study showed that, due to inadequate control, laboratory researchers performing acid treatment experiments on surfaces of CNTs were exposed to airborne nanoparticles generated during the tasks.

• Restorative Dentistry and Endodontics
• /
• v.32 no.3
• /
• pp.236-247
• /
• 2007

The purpose of this study was to evaluate the effects of cyanate methacylate on the shear bond strengths to bovine dentin surfaces as a dentin primers. Seven experimental adhesives were made with different mass fraction of Isocyanatoetylme-thacrylate (IEM), 40wt% HEMA (Wako Pure Chemical Industries Osaka, Japan), 0.6% camphoroquinone, 0.4% amine and ethanol as balance dentin bonding agents (0, 2, 4, 6, 8, 10, 12%) were made and applied on the surface of bovine dentin specimens of 7 experimental groups. Shear bond strengths were measured using a universal testing machine (Instro 4466). To identify the ratio and modes of cohesive failures, microscopic examinationn was performed. The ultra-structure of resin tags were observed under scanning electron microscope. The results were as follows ; 1) A higher shear bond strengths (33.62 MPa) in group 8% of Cyanate methacrylate to dentin were found, but there were no statistically significancy between Groups (p > 0.05). 2) The higher ratio of cohesive failures mode in group 2, 6, an 10% could be seen than that in any other groups. 3) A shorter resin tags were observed in all experimental groups. This could be resulted that the preventing from the cyanate methacrylate penetrate into dentin owing to reacting it with dentin collagen. Therefore the resin tags were shorter in lengths. Whether the higher bonding strengths of dentin bonding agents can be affected was not been assured with statistic results. The results indicated that the relation between tensile strengths of the dentin adhesives to bovine dentin and resin tags formed into the dentin could not affected. The main reason of increasing the shear bond strength to bovine dentin in experimental groups could not be assured.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.2
• /
• pp.144-150
• /
• 2013

Hybrid ceramic membrane (HCM) processes that combined ozonation with a ceramic membrane (CM) or a reactive ceramic membrane (RM), an iron oxide nanoparticles (IONs) incorporated-CM were investigated for membrane fouling control. Alumina disc type microfiltration and ultrafiltration membranes doped with IONs by sintering method were tested under varying mass fraction of IONs. Scanning electron microscope (SEM) images showed that IONs were well-doped on the CM surface and doped IONs were approximately 50 nm in size. Change in the pure water permeability of RM was negligible compared to that of CM. These results indicate that IONs incorporation onto CM had little effect on CM performance in terms of the flux. Natural organic matter (NOM) fouling and fouling recovery patterns during HCM processes confirmed that the RM-ozonation process enhanced the destruction of NOM and reduced the extent of fouling more than the CM-ozonation process by hydroxyl radical formation in the presence of IONs on RM. In addition, analyses of NOM in the feed water and the permeate showed that the efficiency of membrane fouling control results from the NOM degradation during HCM processes; leading to removal and transformation of relatively high contents of aromatic, high molecular weight and hydrophobic NOM fractions.

• Journal of Animal Science and Technology
• /
• v.46 no.5
• /
• pp.763-772
• /
• 2004

The patterns of fungal growth and fiber digestion under the microscope, and tile productions of fibrolytic enzyme were studied in an in vitro culture with Neocallimastix frontalis SA when either filter paper or rice straw was provided as sole energy source. Under the microscopic observation, active zoospores attachment, sporangium development and complex rhizoidal system were founded on the surface and at the edge of filter paper. After 7 days of incubation, a reduced fiber mass, a decreased fiber cohesion and a weakened fiber structure by fungal digestion were clearly observed. Similar fungal development was observed with rice straw, but fungal growth and digestion took place mostly on the damaged and exposed portion of rice straw. Although there were some differences in absolute concentration and pattern, the concentration of both cellulase and xylanase increased with incubation time with the higher activity being obtained with filter paper. Their differences were large especially after 48 and 96hr of incubation(P< 0.05). The filter paper was more good inducer of cellulolytic and xylanolytic enzymes compared with complex substrate, rice straw. These findings suggest that the filter paper is the better energy source for N frontalis than the complex substrate, and structural disintegration by physical process is able to help rumen fungal growth on the lignified roughage although anaerobic rumen fungi have mechanical and enzymatic functions for fiber digestion.

• Archives of Plastic Surgery
• /
• v.38 no.4
• /
• pp.339-344
• /
• 2011

Purpose: The goal of cancer surgery is complete removal of cancer tissue and prevention of recurrence. Surgeons can change the surgical instruments after total resection of the cancer mass. The purpose of this procedure is to prevent dissemination of the cancer cells attached to the surgical instruments. Authors hypothesize the possibility of local recurrence caused by the cancer cells attached to the surgical instruments in the skin cancer cases. Methods: Skin cancers were induced by using DMBA-TPA two-stage carcinogenesis model in 10 of Balb/c mice. In 2-weeks, skin cancer was developed in all 10 mice. cancer cell attached surgical instruments were made by pinching the removed cancer tissue using Adson tissue forcep 10, 20, 30 times each. To count number of cancer cells in each forcep with different number of pinching was done, the forceps were washed in 30 mL of the normal saline and Cytospin preparation was done. To make recurrence models from cancer cell attached surgical instrument, three incisions were made in normal skin of each mouse, and local seeding was done by pinching subcutaneous tissue in 10, 20, 30 times each by using Adson teeth forceps mentioned above as cancer cell attached surgical instrument. Results: All skin cancers were squamous cell carcinoma. Local recurrences were developed in 7 mice (3 in 10 times forceping site, 2 in 20 times forceping and 3 in 30 times forceping). In the cytospin test, the mean number of squamous cells in 100 microscope was 28.6 in 10 times, 47.2 in 20 times, 93.6 in 30 times, respectively. P value was 0.002 in Wilcoxon-Sign test. Conclusion: The number of cell count was significantly increased as number of pinching was increased. And these cells are able to induce local recurrence by local seeding. Considering this result, authors are able to confirm that the minimal handling in cancer surgery is important factor to prevent local recurrence.

• Applied Chemistry for Engineering
• /
• v.31 no.6
• /
• pp.639-645
• /
• 2020

Among the components of redox flow battery (RFB), the electrode serves as a diffusion layer of an electrolyte and a path for electrons and also is a major component that directly affects the RFB performance. In this paper, chloric/sulfuric mixed acidwas used as a supporting electrolyte in RFB system with Fe2+/Fe3+ and V2+/V3+ as redox couple. The optimum electrode and activation temperature were suggested by comparing the capacity, coulombic efficiency and energy efficiency according to the electrode type and activation temperature. In the RFB single cell evaluation using 5 types of carbon electrodes used in the experiments, all of them showed close to the theoretical capacity to retain the reliability of the evaluation results. GFD4EA showed relatively excellent energy efficiency and charge/discharge capacity. In order to investigate the electrochemical performance according to the activation temperature, GFD4EA electrode was activated by heat treatment at different temperatures of 400, 450, 500, 600 and 700 ℃ under an air atmosphere. Changes in physical properties before and after the activation were observed using electrode mass retention, scanning electron microscope (SEM), XPS analysis, and electrochemical performance was compared by conducting RFB single evaluation using electrodes activated at each temperature given above.

• Clean Technology
• /
• v.27 no.2
• /
• pp.132-138
• /
• 2021

Research is being conducted on graphene to provide graphene having both excellent physical as well as electrical properties in addition to unique physical properties. In this study, Hummer's method, which is a representative method for chemical exfoliation, was applied in order to investigate the possibility of the mass production of high-quality graphene oxide. Three types of graphite (graphite, crystalline graphite, and expanded graphite) were used in the preparation of graphene oxide with variations in the amount of potassium permanganate added, reaction temperature, and reaction time. Then a Fourier transform infrared spectroscopy (FT-IR), a Raman spectrometer, and a transmission electron microscope (TEM) were used to measure the quality of the prepared graphene oxide. Of the three types of graphite used in this experiment, crystalline graphite showed the highest quality. The prepared graphene oxide was then purified with an organic solvent, and an analysis conducted using energy dispersive X-ray spectroscopy (EDS). From the results of the residual values, we were able to confirm that both acid wastewater and wastewater were best purified using cyclohexane. The method for manufacturing graphene oxide as well as the method of purification using organic solvents that are presented in this study are expected to have less of an environmental impact, making them environmentally friendly. This makes them suitable for use in various industrial fields such as the film industry and for heat dissipation and as coating agents.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.3
• /
• pp.293-299
• /
• 2022

Recently, various stakeholder are interested in microplastic to cause pollution of the marine's ecosystem and effort to conduct study of product's life cycle to reduce pollution of marine's ecosystem. The micorplastic refer to materials of the nano- to micro- sized units and it can be classified into primary and secondary. The primary microplastic mean the manufactured for use in the specific field such as the microbead of the cosmetic or cleanser. also, secondary mean the unintentionally generated during use of the product such as the textile crumb by the doing the laundry. Tire and Road Wear Particles(TRWPs) are also defined as secondary microplastic. Typically, TRWPs are created by friction between the tread compound's rubber of the tire and the surface of the road du ring the driving cars. Most of the generated TRWPs exist on the roadside and some of them were carried to marine by the rainwater. In this study, we perform the quantitative analysis of the TRWPs existed in fine dust at the roadside. So, we collected the dust from the roadside in Chungcheongnam-do's C site with a movement of 1,300 cars per the hour. The collected samples were separated according to size and density. And shape analysis was performed using the Scanning Electron Microscope(SEM). We were possible to discover a lot of TRWPs at the fine dust of the 100 ± 20 ㎛. And we analysis it u sing the Thermo Gravimetric Analysis(TGA) and Gas Chromatography/Mass Spectrometer(GC/MS) for the quantitative components from the tire. As a result, it was confirmed that TRWPs generated from the roadside fine dust were included the 0.21 %, and the tire and road components in the generated TRWPs consisted of the 3:7 ratio.

• Journal of Conservation Science
• /
• v.38 no.2
• /
• pp.124-132
• /
• 2022

Through scientific analysis, this study identified the material characteristics of metal foil decorating the border line and knotting of the National Folklore Cultural Heritage 'Pouch for the Sutra Embroidered with a Sun and Moon Design'. Through Scanning Electron Microscope-Energy Dispersive Spectroscopy results, it was estimated that silver (Ag) and sulfur (S) were present in the metal foil, and silver leaf was also attached to the medium. S may discolor Ag from yellow to black depending on its concsentration and contact time. Yellow color could not be identified in metal foil at present. But there existed an example of the preparation of a gold-colored flat silver thread; therefore, further research is needed to estimate the original color. The lamella was reddish brown on the back. Aluminum, silicon, and iron were also detected and were the main components found in red soil. This is believed to be the red adhesive in traditional flat gold thread and is considered to be an adhesive-related component of the metal foil. From the gas chromatography mass spectrometry results, the adhesive component was confirmed to be animal glue.

• Korean Journal of Ecology and Environment
• /
• v.38 no.1 s.110
• /
• pp.83-94
• /
• 2005

The objective of the study was to elucidate early life history of Rhinogobius brunneus, based on laboratory observations and field works, along with its courtship and spawning behaviors. The male and female fish matured were sampled for the lab experiments from Gap-Stream, which is one of the tributaries of Geum-River, Korea. The spawning behaviors and courtship of matured adults had a typical pattern; matured males of Rhinogobius brunneus built up spawning nests and had their own territory before the spawning, and the behavior then triggered the egg spawning of female with active courtship. The females attached elliptic egg mass as a single layer, on the stones below the spawning nest. After the spawning, the egg mass was guarded by males only until the hatching. The size of egg fertilized, measured by microscope was about 1.5${\pm}$0.1mm in length and 0.7${\pm}$0.1 mm in the egg's width. According to the lab experiments conducted under four temperature regime, the lapsed time for the hatching was shortened as temperatures increased in the treatments. On the contrary to the hatching time, the average length of newly hatched larvae showed a reverse relation with water temperature. The larvae, considered a final stage of the early life history was about 3.6 mm in total length for water temperature of $18^{\circ}C$, whereas they were between 3.1 mm and 3.2 mm for over $25^{\circ}C$. This indicates that higher water temperature may decrease the growth rate in the early life history. These results may provide valuable information for the population conservation and ecosystem protection under accelerated water pollution and habitat degradations in Korea.