• Journal of Marine Bioscience and Biotechnology
• /
• v.9 no.2
• /
• pp.30-34
• /
• 2017

Microorganisms are contained filtered sea water that is why we often observed co-existing copepod species in the large-scale rotifer culture tanks. In this study, we investigated about taxonomical study of co-existing copepods in Brachionus rotifer mass culture tanks of several seafarming centers at Jeju-do and Pusan, Korea by microscope. Also, we counted number of copeods and density in 10 mL of cultured sea water and distinguished growing patterns and sex. As results, we can identified 4 species copepods, 2 species of Tisbe, 1 species of Tigriopus and 1 species of Apocyclops.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.6
• /
• pp.565-572
• /
• 2000

To quantitatively estimate mass contribution of long-range transported yellow sand, their sources should be separated independently from various local soil sources having similar elemental compositions. While it is difficult to estimate total mass loadings of pure yellow sand by traditional bulk analysis, it can be clearly solved by an particle-by-particle analysis. To perform this study, two yellow sand samples and three local soil samples were collected by a mini-volume sampler. These samples were three analyzed using a scanning electron microscope(SEM) equipped with an energy dispersive x-ray analyser (EDX) was used to obtain basic chemical information of individual yellow san particles. A total of 19 elements in a single particle were measured to develop a source profile with newly created homogeneous particle classes (HPCs) as chemical variables. The present study showed that the yellow sand samples as well as three local soil samples were characterized with reasonably well created HPCs. Finally the mass fraction of each HPC in each sample was calculated and then compared each other.

• Korean Journal of Human Ecology
• /
• v.21 no.3
• /
• pp.539-550
• /
• 2012

In-depth knowledge of fabric microstructure is essential for understanding clothing comfort since it plays a significant role in heat and mass transfer between the human body and clothing. In this study, a novel method was employed for investigating 3D surfaces and solid construction characteristics of specific fabrics by using a reverse engineering technique. The surface construction data were obtained by a confocal laser scanning microscope and then manipulated by a 3D analysis program. Triangle mesh was used for connecting each 3D point, with clouds and fabric surface characteristics created by rendering techniques. For generating a 3D solid model, determinants of radius of curvature was used. According to the proposed method, actual surface expression of the real fabric was achieved successfully. The results from this methodology can be applied to the detailed analysis of clothing comfort that is highly influenced by the microstructure of the fabric.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.1
• /
• pp.57-65
• /
• 2000

In this paper, a model reference adaptive control for the atomic force microscope (AFM) of tapping mode is investigated. The dynamics between the AFM system and al sample is mathematically modeled as a second order spring-mass-damper system with oscillatory inputs. The attractive and repulsive forces between the tip of the AFM system and the sample are derived using the Lennard-Jones potential energy. By non-dimensionalizing the displacement of the tip and the input frequency, the chaotic behavior near a resonance frequency is better depicted through the non-dimensionalized equations. Four nonlinear analysis techniques, a phase portrait, sensitive dependence on initial conditions, a power spectral density function, and a Pomcare map are investigated. Because the equations of motion derived in this paper involve unknown parameter values such as the damping effect of the air and the interaction constants between materials, the standard model reference adaptive control is adopted. Two control objectives, the prevention of chaos and the tracking of reference signal, are pursued. Simulation results are included.

• Archives of Reconstructive Microsurgery
• /
• v.21 no.2
• /
• pp.86-91
• /
• 2012

Purpose: Mass can compress around tissue and cause deviation of normal anatomical structures. Often, mass grows toward neurovascular pedicle and encircles depending on the nature of mature mass. Neglecting neurovascular involvement of the mass is a serious problem not to be overlooked. Authors have performed microscopic approach regarding mass involving the neurovascular pedicle in the hand. Materials and Methods: From January 2007 through February 2012, retrospective analysis for nine cases of mass involving neurovascular pedicles was done. Patients were evaluated preoperatively by ultrasonography or MRI and checked intraoperative finding. Masses were evaluated by site, preoperative evaluation, involved neurovascular pedicle, histopathologic diagnosis, complication, and recurrence. Results: The site of mass involving neurovascular pedicles was 4 cases on the wrist, 2 cases on the palm, 2 cases on the finger, 1 case on the hand dorsum. Involved neurovascular pedicles were 3 radial arteries and nerves, 3 proper digital arteries and nerves, 1 radial artery, 1 superficial branch of radial nerve, 1 common digital artery and nerve. The histopathologic diagnosis of mass were 3 ganglions, 2 giant cell tumors, 2 epidermal cysts, 1 fibroma, and 1 benign spindle tumor. There were 2 cases of recurrence and secondary excisions were performed. Conclusion: Neurovascular pedicle injury can lead to serious complication like sensory and motor disorders, distal part ischemia, and so on. In case of mass suspected neurovascular invasion, accurate preoperative evaluation such as ultrasonography or MRI is necessary. To prevent any neurovascular related complication during mass excision, delicate surgical technique using a microscope becomes essential.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.05a
• /
• pp.45-52
• /
• 2002

The tribological role of mass transfer layer was studied with silver coatings under various ranges of load and sliding speed. Silver coating was performed with a functionally gradient coating method. Tests were performed in dry sliding conditions, using a ball-on-disk contact configuration, at the load of 0.0196-17.64 N and the sliding speed of 20-1,000 mm/s in ambient air. Optical microscope and EPMA analyses showed that contact surfaces were covered with the mass transfer layers of agglomerated wear particles depending upon the contact conditions, and they greatly influenced the tribological characteristics of the surfaces. However, the formation of mass transfer layer was suppressed as the sliding speed increased, and above a critical sliding speed, no mass transfer layer was able to form. For building up a general framework of tribological behavior of the coated silver films, all test data were summarized on a map whose axes are contact pressure and sliding speed.

• Journal of Sensor Science and Technology
• /
• v.14 no.1
• /
• pp.1-6
• /
• 2005

This paper describes a novel concept of a chemically sensitive scanning force microscope (CS-SFM). It consists of the conventional SFM and the time-of-flight mass spectrometer (TOF-MS). A switchable cantilever (SC) fabricated by the micromachining technology combines each advantage of two completely different systems, SFM and TOF-MS. The CS-SFM offers to produce both images of topography and chemical information simultaneously. First we employed a rotatable tip holder based on 4 piezotube actuators for demonstration of the possibility of the CS-SFM concept. Second the CS-SFM concept is optimized with the micromachining technology. The micromachined SC with an integrated bimorph actuator and a piezoresistive strain sensor provides a reasonable switching speed of ${\sim}10$ ms which is very attractive for the CS-SFM application. The SC is currently being integrated in an ultra-high-vacuum system to perform various experiments.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.100-100
• /
• 2003

An image processing algorithm has been developed in order to analyze the nanofiber web images obtained from a high magnification microscope. It has been known that precise pore detection on thick webs is extremely difficult mainly due to lack of light uniformity, difficulty of fine focusing and translucency of nanofiber web. The pore detection algorithm developed has been found to show excellent performance in characterizing the porous structure, thus being a promising tool for on-line quality control system under mass production. Since the images obtained from an optical microscope represent only web surface, a scale factor has been introduced to estimate the web structure as a whole. Resulting web structures have been compared to those by mercury porosimetry, especially in pore size distribution. It has been shown that those two structures have a strong correlation, indicating that scaling of a single layer web structure can be an effective way of estimating the structure of thick fiber webs.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.275-280
• /
• 2001

Recently, the trends of industrial products grow more miniaturization, variety and mass production. Micro drilling which take high precision in cutting work is requested more micro hole and high speed working. Especially, Micro deep hole drilling is becoming more important in a wide spectrum of precision production industries, ranging from the production of automotive fuel injection nozzle, watch and camera parts, medical needles, and thick multi-layered Printed Circuit Boards(PCB) that are demanded for very high density electric circuitry. This paper shows the tool monitoring results of micro drill with tool dynamometer. And additionally, microscope with built-in monitor inspection show the relationship between burr in workpiece and chip form of micro drill machining.

• Journal of Korea Foundry Society
• /
• v.17 no.5
• /
• pp.472-479
• /
• 1997

The effect of size and mass fraction of SiC particulate on the fatigue and wear have been investigated for semi-liquid formed SiCp/AZ91HP Mg composites. In the study, different particulate sizes of 7, 20, $50 {\mu}m$ were prepared with various mass fraction for sample preparation. By tension-tension fatigue tests, whose procedures are standardized in ASTM standard 647E-93, the da/dN vs. ${\Delta}K$ curves were obtained. Also, the crack propagation paths were observed by optical microscope. As a result of wear test, specific wear loss is decreased with increasing mass fraction and particulate size. Specific wear loss of 30 mass% $50 {\mu}m$ SiC reinforced Mg composite is compared to SKD11.