• Journal of Adhesion and Interface
• /
• v.20 no.3
• /
• pp.102-109
• /
• 2019

The material constitution of multi-layered thin film coated on the PET base film was analyzed using ATR FT-IR and pyro GC/MS combination. The cross section of the film was acquired by cracking the film after dipping in liquid nitrogen and was observed using optical microscope. Total thickness of the coated film was $70{\mu}m$ and three layers were observed. Since each layers were too thin to analyze directly except the surface layer, analyzable area of each layers were exposed by using a proper solvent and were investigated using ATR FT-IR and pyro GC/MS. Results shows that three layers were commonly consisted of urethane-acrylate copolymers. Also, inorganic and/or metal inclusions detected by XPS and SEM-EDAX were exhibited by nano size $SiO_2$ particles in layer(1) and aluminum flakes in layer(2).

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.27 no.2
• /
• pp.55-62
• /
• 2021

This study aims to reduce the rancid odor generated during the fermentation process of kimchi by inserting zinc oxide (ZnO) into an inorganic porous material with a high surface area to decompose or adsorb the fermentation odor. ZnO activated by the presence of moisture exhibits decomposition of rancid odors. Mixed with Titanium dioxide (TiO₂), a photocatalyst. To manufacture the packaging liner used in this study, NaOH, ZnCl₂, and TiO₂ powder were placed in a tank with diatomite and water. The sludge obtained via a hydrothermal ultrasonication synthesis was sintered in an oven. After being pin-milled and melt-blended, the powders were mixed with linear low-density polyethylene (L-LDPE) to make a masterbatch (M/B), which was further used to manufacture liners. A gas detector (GasTiger 2000) was used to investigate the total amount of sulfur compounds during fermentation and determine the reduction rate of the odor-causing compounds. The packaging liner cross-section and surface were investigated using a scanning electron microscope-energy dispersive X-ray spectrometer (SEM-EDS) to observe the adsorption of sulfur compounds. A variety of sulfur compounds associated with the perceived unpleasant odor of kimchi were analyzed using gas chromatography-mass spectrometry (GC-MS). For the analyses, kimchi was homogenized at room temperature and divided into several sample dishes. The performance of the liner was evaluated by comparing the total area of the GC-MS signals of major off-flavor sulfur compounds during the five days of fermentation at 20℃. As a result, Nano-grade inorganic compound liners reduced the sulfur content by 67 % on average, compared to ordinary polyethylene (PE) foam liners. Afterwards SEM-EDS was used to analyze the sulfur content adsorbed by the liners. The findings of this study strongly suggest that decomposition and adsorption of the odor-generating compounds occur more effectively in the newly-developed inorganic nanocomposite liners.

• Composites Research
• /
• v.35 no.3
• /
• pp.182-187
• /
• 2022

In this paper, the thickness of a multilayer PCB was predicted through an empirical formulation based on the physical properties of the prepreg used in multilayer PCB. Since the thickness of prepreg reduction when manufacturing a PCB due to the physical properties and copper foil residual rate, it is necessary to accurately predict the thickness of the PCB through the thickness empirical formulation. To determine the density of the prepreg, the mass and thickness of the prepreg were measured. To manufacture the CCL, the prepreg and copper foil were laminated using a hot press machine, and the thickness was measured using a microscope and micrometer. An 8-layerd PCB was designed with different circuit densities to measure the change in the thickness with the copper foil residual ratio, and the proposed empirical formulation was verified by comparing the measured thickness with the value obtained using the empirical formulation. As a result, the errors for the CCL and multilayer PCB were 2.56% and 4.48%, respectively, which demonstrated the reliability of the empirical formulation.

• Restorative Dentistry and Endodontics
• /
• v.48 no.1
• /
• pp.8.1-8.8
• /
• 2023

Objectives: This study was designed to evaluate the parameters of bonding performance to root dentin, including push-out bond strength and dentinal tubular biomineralization, of a hydraulic bioceramic root-end filling material premixed with dimethyl sulfoxide (Endocem MTA Premixed) in comparison to a conventional powder-liquid-type cement (ProRoot MTA). Materials and Methods: The root canal of a single-rooted premolar was filled with either ProRoot MTA or Endocem MTA Premixed (n = 15). A slice of dentin was obtained from each root. Using the sliced specimen, the push-out bond strength was measured, and the failure pattern was observed under a stereomicroscope. The apical segment was divided into halves; the split surface was observed under a scanning electron microscope, and intratubular biomineralization was examined by observing the precipitates formed in the dentinal tubule. Then, the chemical characteristics of the precipitates were evaluated with energy-dispersive X-ray spectroscopic (EDS) analysis. The data were analyzed using the Student's t-test followed by the Mann-Whitney U test (p < 0.05). Results: No significant difference was found between the 2 tested groups in push-out bond strength, and cohesive failure was the predominant failure type. In both groups, flake-shaped precipitates were observed along dentinal tubules. The EDS analysis indicated that the mass percentage of calcium and phosphorus in the precipitate was similar to that found in hydroxyapatite. Conclusions: Regarding bonding to root dentin, Endocem MTA Premixed may have potential for use as an acceptable root-end filling material.

• Applied Microscopy
• /
• v.40 no.1
• /
• pp.9-14
• /
• 2010

Coreoleuciscus splendidus is a teleost belonging to Gobioninae, Cyprinidae. The oogenesis was investigated by light microscope. The ovary was located between intestine and air bladder, a grayish and ellipsoidal shape with the major axis 20 mm and the minor axis 5 mm. Cytoplasm of oogonia was basophilic and many nucleoli were located at inside of nuclear membrane. In primary oocytes, yolk vesicles were distributed only in the marginal area and egg envelope was not formed on the outside of an egg. In secondary oocytes, the egg envelope was formed and yolk vesicles in the cytoplasm were increased than the earlier stage. The basophilic substance of cytoplasm was changed to acidic. In case of matured egg, thickness of egg envelope and size of egg were increased. The yolk vesicles were changed to yolk mass in accordance with development. In conclusion, the oogenesis of C. splendidus was characterized by the increase in cell size, the formation and accumulation of yolk, and the decrease of basophilic substance in the cytoplasm. The oogenesis of C. splendidus is similar with other Cyprinidae fishes. But further study on ultrastructural study of fertilized egg envelope will be necessary to get the species specificity.

• Korean Journal of Acupuncture
• /
• v.26 no.1
• /
• pp.79-84
• /
• 2009

Objective : In 1960's Bonghan Kim's team found BongHan(BH) ducts which were presumed as acupuncture meridians and BH corpuscles. They asserted Bonghan theory and SanAl theory which was involved in cell division and cell restoration. However, many other experiments which had been operated to demonstrate and find the existence of BH ducts had failed because of the secret of blue stain drugs. During the last several years, BongHan theory has been revived through experimental researches to find the anatomical structures of BH ducts and corpuscles by Soh's Biomedical Physics Lab. Soh's research team used the staining with Janus Green B, Alcian blue, nanoparticles and Acridine Orange. We used DAPI staining to find the existence of BH ducts and the corpuscles and to observe nuclear arrangement. Methods : We used japan white rabbits as experimental animals. BH ducts and corpuscles were stained with DAPI. The nucleus configuration in BH ducts stained with DAPI were observed with microscope. Results : In this study, we found thread like structures in silver white color distinguished from the blood vessels, nerves and lymph vessels. These thread like vessels in the linear duct shape were connected to same colored mass in the ball shape. Thread like structures we found could be separated easily from the surrounding other organ mass. The nuclei of the thread like structure in DAPI staining, are about 10${\sim}$20${\mu}m$ length, in rod shape and linear arrangement. Conclusion : We concluded that the thread like structure we found was same vessel reported by Soh's research team, BongHan ducts and corpuscle.

• Journal of Energy Engineering
• /
• v.7 no.1
• /
• pp.146-156
• /
• 1998

Fly ash produced in coal combustion is a fine-grained material consisting mostly of spherical, glassy, and porous particles. A physical, morphological, and chemical characteristic of fly ash has been analyzed. This study may contribute to the data base of domestic fly ash, the improvement of combustion efficiency, ash recycling and ash collection in the electrostatic precipitator. The physical property of fly ash is determined using a particle counter for the measurement of ash size distribution and gravimeter. Morphological characteristic of fly ash is performed using a scanning electron micrograph and an optical microscope. The chemical components of fly ash are determined using an inductively coupled plasma emission spectrometry (ICP). The distribution of fly ash size was ranged from 15 to 25 $\mu$m in mass median diameter. Exposure conditions of flue gas temperature and duration within the combustion zone of the boiler played an important role on the morphological properties of the fly ash such as shape, relative opacity, coloration, cenosphere and plerosphere. The spherical fly ash might be generated at the condition of complete combustion. The size of fly ash was found to be increased the with particle-particle interaction of agglomeration and coagulation. Fly ash consisted of $SiO_2\;Al_2O_3\;and\;Fe_2O_3$ with 85% and carbon with 3~10% of total mass.

• Korean Journal of Microbiology
• /
• v.38 no.1
• /
• pp.26-30
• /
• 2002

A ubiquitous bacterium,Effects of Lead, Copper and Cadmium on Pseudomonas cepacia KH410 Isolated from Freshwater Plant Root was isolated from freshwater plant root and interactions of lead, copper and cadmium with this strain was studied. Mass production of dry cell weight 2.72 g-DCW/ι-medium was obtained by cultivation in a nutrient medium containing 1% yeast extract, 1% soytone and 0.5% NaCl, pH 7.0, at temperature of 28℃ for 24 hrs under aeration. The mass of dry cell produced after exposure with 100 mg/ι of heavy metal was 1.98 g/ι for lead, 1.58 g/ι for copper and 0.20 g/ι for cadmium, respectively. The minimal inhibitory concentrations (MIC) for each heavy metal was 1.3 mM for lead,0.8 mM for copper and 0.4 mM fur cadmium, respectively. Cell aggregation occurred by each heavy metal exposure was observed from 1 day to 4 days by an optical microscope. Entrapment, precipitation effects on cell by heavy metals between 10 min and two hours were examined by an electron microscopy. Cadmium appeared to be the most toxic on cells and the order of toxicity was cadmium>copper>lead.

• Applied Microscopy
• /
• v.41 no.3
• /
• pp.189-196
• /
• 2011

Histological study on egg envelope and oogenesis of Kichulchoia multifasciata (Pisces, Cobitidae) was carried out by light microscopes and scanning electron microscopes. Various developmental cells appeared in ovary of the specimen catched during November 2010. The cytoplasm of oogonia was acidic and many nucleoli were located at the inner side of nucleus membrane. The size of the oogonia was $103.9{\pm}24.7$ ${\mu}m$ with nucleus size $42.9{\pm}6.9$ (31.1~50.3) ${\mu}m$. Primary oocyte having $277.5{\pm}60.5$ (216.7~354.9) ${\mu}m$ in diameter began to accumulate yolk vesicles. As the developmental stages proceed, secondary oocyte grows larger to $617.6{\pm}85.1$ (503.4~723.6) ${\mu}m$, and eosinophilic yolk granules yolk granules appeared between the yolk vesicles occupying most cytoplasm, and there are some yolk mass formed already. There are some yolk mass formed already. Envelope of fertilized egg investigated by a scanning electron microscope had plenty of microvilli (2~3 ${\mu}m$ in length) over the entire egg surface and a micropyle. Especially, the microvilli surrounding the micropyle were longer than those of egg surface with $5.26{\pm}1.22$ ${\mu}m$.

• Applied Microscopy
• /
• v.41 no.3
• /
• pp.163-168
• /
• 2011

Tiger barb (Puntius tetrazona Bleeker, 1855) is a teleost belonging to Cyprinidae. The oogenesis of tiger barb was investigated by light microscope. The ovary was of white and ellipsoidal shape with the major axis 2 cm and the minor axis 1 cm. Cytoplasm of oogonia was basophilic and many nucleoli were located at inside of nuclear membrane. In early stage of primary oocyte, yolk vesicles were distributed only in the marginal area. In secondary oocyte, the egg envelope was formed and yolk vesicles was formed in the cytoplasm. The basophilic substance of cytoplasm was changed to acidic. In case of matured egg, thickness of egg envelope and size of egg were increased. The yolk vesicles were changed to yolk mass in accordance with development. Also, there is not the formation of oil droplets in cytoplasm. In conclusion, the oogenesis of tiger barb was characterized by the increase in cell size, the formation of yolk, the decrease of basophilic substance in the cytoplasm, and formation of yolk mass.