• Weed & Turfgrass Science
• /
• v.7 no.2
• /
• pp.130-139
• /
• 2018

The colors of packaging of herbicides and non-selective herbicides on the market in Korea are defined as brown and red, respectively, according to the notification of RDA. The present study aimed to understand consumer's electroencephalographic (EEG) response when looking at brown and red colors of herbicide and non-selective herbicide packaging papers. The EEG cap was placed on the scalp of each participant (men and women, 10 to 20 years old) and white (control) - brown - white - red colors were sequentially displayed for 5 seconds using the computer monitor. The EEG was measured and statistical analysis was performed using SPSS. For the brown color of the herbicide, men showed a decrease in concentration and a distracting response due to a decrease in the ratio of mid beta to theta (RMT) and the spectral edge of frequency (SEF90). In women, an increase in the ratio of SMR to theta (RSMT) and the spectral edge frequency 50% of the alpha (ASEF) was observed in different brain regions and these EEG changes may enhance the relaxation, stabilization and awakening states of the brain. For the red color of the non-selective herbicide, ASEF increased psychological stability in men. In women, a decrease in absolute high beta (AHB) may associate with a decrease in attention state of the brain. Overall data of the present study clearly revealed that the colors of two herbicides showed significantly different EEG response and gender difference.

• Journal of the Korean Geosynthetics Society
• /
• v.11 no.1
• /
• pp.65-75
• /
• 2012

Since the modem reinforced soil wall technology was introduced in domestic civil engineering society in the year 1980, the reinforced soil walls have been extensively used because these technologies have advantages such as economical efficiency, graceful appearance, and easy construction. This paper describes the application of reinforced soil wall, design criteria, and construction problems. Many cases of troubles, which include a severe deformation of facing, cracks of facing block, overall sliding failure and so on, have been reported. Inappropriate design and construction management mainly induce these problems. The technological level of design and quantity control for reinforced soil wall is not sufficiently supported to cope with the growth quantity of reinforced soil wall construction market and the increasing number of construction companies. The unified standard design and construction criteria of reinforced soil wall should be established with the detail consideration of overall performance and stability. The quality control of design and construction, and cost of construction must be seriously executed to construct a high quality of reinforced soil wall.

• Fashion & Textile Research Journal
• /
• v.8 no.6
• /
• pp.713-720
• /
• 2006

Heat conductivity, height, size, elasticity of pillow, stability of shape, hygroscopicity, ventilation, temperature and easy movability, and so on, are considered to be some of major conditions that affect the comfortable sleep. Considering those factors together, the thermal properties, height, shape and feeling of touch, etc, of pillow must be taken into account. Though studies have been conducted to figure out the physical properties of mattress or pillows from the perspective of factors related to the environment of sleep, they are not enough to be used as an index to evaluate the qualitative aspect of sleep. This study tries to consider the effect of pillow filling materials on the comfortable sleep, for which EEG, ECG, EOG, EMG, RT, etc, are to be measured in an attempt to provide the basic data required in proposing the condition that may lead to a sound and comfortable sleep. Three types of pillows that are sold in the market were used for this research in order to evaluate the quality of sleep depending on the filling materials of pillow. All data were statistically processed and the following conclusions were drawn. It was found that the pillow with feathers provided the best comfort as the pillow A turned out to have the shortest sleeping latency(SL) from the perspective of comfort. The pillow B which used the polyethylene is deemed to be suitable for fatigue relieving purpose as it turned out to have the highest slow wave sleep(SWS), but no statistically significant difference was validated. Moreover, the pillow C which used the natural wool was found to have the narrowest contacting area of the pillow and head and provide a great warm heat comfort that may led to a sound sleep because the temperature below the pillow took the longest time to rise.

• The Korea Journal of Herbology
• /
• v.26 no.1
• /
• pp.13-19
• /
• 2011

Objective : This study was to compare antioxidant activity and HPLC pattern analysis from 4 species of changpo(ch$\={a}$ngp$\'{u}$). Methods : To compare the antioxidant activity and HPLC pattern analysis from the 4 species of changpo, we performed the in vitro anti-oxidative activity assays and HPLC analysis from 70% ethanol extracts of Acorus gramineus Sol. (=AG), A. tatarinowii Schott (=AT), A. calamus L. (=AC) and Anemone altaica Fisch. ex C.A.Mey (=AA) taken in the herbal medicine market of Korea. Results : AG has the most effective anti-oxidative activity among 4 species of changpo. As the HPLC pattern analysis, AT was detected the unknown peak at retention time 14.9 min whereas AG was not showed any peak at the same retention time. These results suggest that AG could be used rather than AT when it need to be prescribed as anti-oxidative medicine. Conclusions : This result can be used as the basic data contributing to the stability of AG according to an appropriate clinical application.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.05a
• /
• pp.35-41
• /
• 2008

Qualitative enhancement of dwelling life has changing the recognition for the environment friendly wood which is being highlighted for its usage as an interior materials. This trend may prove the excellent performance of wood whose inherent characteristics has its comfortable, mild feeling of material, sound resistance and stabilities and the market of interior woods including floor, moulding and wooden panel as finishing interior materials is growing sustainably. However, since this materials is vulnerable to humidity and flame, waterproofing and flame retarding stability, an essential condition for interior materials, together with maintenance, are the main topics to be resolved. From the above-mentioned results, as a result of waterdrop contact angle, wood absorption volume and water content percentage test and the performance test of the processed materials after flame retardant, though there was some submerging time changes among types of woods for ensuring waterproofing performance improvement but as time passes, similar tendency was noticed to be formulated. As the submerging time is increased, so does the absorption volume and accordingly optimal level of range is judged to be drawn in order to ensure excellent performance, taking optimal economy into consideration. Therefore, it is considered that above-mentioned woods could be utilized for waterproof and flame retardant processed interior materials using uniform microwave and in order to put this technology into practical application, a research by way of diversified performance proving is required to be carried out.

• Journal of Biosystems Engineering
• /
• v.32 no.6
• /
• pp.448-454
• /
• 2007

This study was conducted to develop a 100 kPa soil tensiometer mainly consisted of a porous ceramic cup, water-holding tube, and a digital vacuum gauge, through theoretical design analysis and experimental performance evaluation. Major findings were as follows. 1. Theoretical analysis showed that air entry value of a porous media decreased as the maximum effective size of the pore increased, and the maximum diameter of the pores was $2.9\;{\mu}m$ for measuring up a 100 kPa of soil-water tension. 2. Property analysis of tensiometer porous cups supplied in Korean domestic market indicated that main components were $SiO_2$ and $Al_2O_3$ with a porosity range of $33.8{\sim}49.3%$. 3. The porous cup selected through sample fabrication and air-permeability tests showed weight ratios of 87% and 11% for $Al_2O_3$ and $SiO_2$. The analysis of SEM (scanning electron microscope) images showed that the sample was sintered at temperatures of about $1150^{\circ}C$, which consisted of pores with sizes of up to 25% of those for commercial porous cups. 4. The prototype soil tensiometer was fabricated using the developed porous cup and a digital vacuum gauge that could measure water tension with a pressure of 85 kPa in air tests. 5. In-soil tests of the prototype conducted during a period of 25-day drying showed that soil-water tension values measured with the prototype and commercial units were not significantly different, and soil-water characteristic curves could be established for different soils, confirming accuracy and stability of the prototype.

• Environmental and Resource Economics Review
• /
• v.12 no.2
• /
• pp.275-298
• /
• 2003

This paper compares the economic effects of climate policy options in Korea. The impacts and implications of carbon and Btu tax schemes are analyzed using the META Net modeling system, which was developed at the Lawrence Livermore National Laboratory (LLNL). Findings indicate that carbon tax is more cost effective compared to Btu tax, but this does not necessarily mean the former is more desirable than the latter. Energy market stability and national energy security is equally important in choosing policy options. Moreover Btu tax is more effective in reducing energy consumption in general. It reduces not only carbon intensive energy sources, but non-fossil fuel like electricity. Korean economy consumes too much energy and energy efficiency is very low compared to other OECD countries. So the reduction of energy demand growth should be the first priority of the national energy policy in Korea.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47
• /
• pp.95-106
• /
• 2002

Soybean is one of the most important sources of protein and oil in the world. Recently, emphasis has been laid on the chemical composition of soybean seeds for the processing soybean foods. Improvement of soybean components has been expected to improve food-processing quality for the processed soybean products such as soymilk and various edible ingredients as well as fur the traditional soyfoods. In Korea, soybean breeding research programmes have been focused on the quality of the products derived from soybean with yield stability, and some new modified soybean varieties haying good food-processing quality were developed recently. So the efforts of establishing standard and standardization of products in soybean are important. Three main categories should be considered in view of soybean seed quality; the marketing value such as grain size, shape, and appearance; the eating and processing value such as dehulled ratio, water absorption rate, and benny flavor; the nutritional value such as protein, lipid, and carbohydrate contents. And the new frontiers in research are looking at the functional nutrients in soybeans and how to improve them. In case marketing value, mainly the appearance is evaluated, therefore, each country has an application of standard related to quality. Each determination of standard class, heat-damaged kernels, splits, and soybeans of other colors is made on the basis of the grain when free from foreign materials. But processing value and nutritional value for standardization were not studied in detail till now. In addition, soybean has potential roles in the prevention and treatment of chronic diseases, most notably cancer, osteoporosis, and heart disease. The functional nutrients include a protease inhibitor, phytic acid, saponins, and isoflavones, etc.. It is believed that standardization of soybean quality should perform to overcome the difficulties, relatively high price of domestic soybean products has weakened the competitive power, in the market related to WTO. So, we should focus on further research into the evaluation and establishment of quality-standard in soybean.

• Journal of Korea Port Economic Association
• /
• v.35 no.4
• /
• pp.31-50
• /
• 2019

The retail industry has been coping with changes in the retail market environment for the past decade or so. Using a total of 14 companies, this study aims to reveal the effect of differences in sales channels and retail business styles on the management performance of retail companies. The financial statements of these companies were used to analyze the five key indicators of their management performance. As research variables, sales channels, retail business style and business period were used as factors affecting their management performance. ANOVA or MANOVA was performed to test differences in management performance between groups according to the number of factors. The effect of three factors on the management performance of retail companies was found to be significant. The multi-comparison test revealed significant differences among retail business styles in terms of the five key indicators. TV home-shopping performed better than others in terms of stability and profitability. Internet and mobile shopping companies performed poorly in terms of profitability compared to others and performed higher than department stores in terms of growth, activity, and productivity.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.1
• /
• pp.161-170
• /
• 2013

The FX (Foreign Exchange) is a form of exchange for the global decentralized trading of international currencies. The simple sense of Forex is simultaneous purchase and sale of the currency or the exchange of one country's currency for other countries'. We can find the consistent rules of trading by comparing the gradient boosting method and the decision trees methods. Methods such as time series analysis used for the prediction of financial markets have advantage of the long-term forecasting model. On the other hand, it is difficult to reflect the rapidly changing price fluctuations in the short term. Therefore, in this study, gradient boosting method and decision tree method are applied to analyze the short-term data in order to make the rules for the revenue structure of the FX market and evaluated the stability and the prediction of the model.