• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1750-1751
• /
• 2007

이동하고자 하는 경로에 자석 마커를 설치하고 마커의 자계를 인식하여 경로를 추종하는 이동 로봇의 경로 제어시스템이다. 자석마커 간격 확장과 여러 환경에 따른 자계를 분석하기 위해 자동 자계 측정 장치를 제작하였고, 이를 이용한 실측을 통하여 지자기 제거를 확인하였다. 지자기가 제거된 마커 자기장 값의 정규화와 선형화를 통하여 이동 경로 상에서 위치 인식이 수월하도록 하였으며, 인식된 경로 정보로 이동 로봇의 경로 제어가 가능하도록 하였다.

• Annual Conference of KIPS
• /
• 2018.10a
• /
• pp.920-922
• /
• 2018

This paper describes a method to classify simple circular artificial markers on surfaces of a box on the back of hand to detect the pose of user's hand for VR/AR applications by using a Leap Motion camera and two IMU sensors. One IMU sensor is located in the box and the other IMU sensor is fixed with the camera. Multi-layer Perceptron (MLP) algorithm is adopted to classify artificial markers on each surface tracked by the camera using IMU sensor data. It is experimented successfully in real-time, 70Hz, under PC environments.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1752-1753
• /
• 2007

이동하고자 하는 경로에 자석 마커를 설치하고 마커의 자계를 인식하여 경로를 추종하는 이동 로봇의 경로 제어시스템이다. 마커설치 간격 확장에 따른 센서 배치를 제안하였다. 마커의 극성을 서로 약속된 방법으로 코드화 하여 설치하고, 경로 추적 중에도 마커의 자계 방향을 2진 코드로 인식하여 자계 경로로부터 경로 정보를 수신할 수 있도록 하였다. 소형 이동 로봇 실험 장치를 설계 제작하고 실험을 한 결과 제작된 이동 로봇은 마커로 만들어진 이동 경로를 중앙으로부터 오차 범위 이내에서 이동함을 확인하였고, 이동 경로의 일부 구간에서는 마커의 극배치를 이용한 코드를 주행 중에 정확히 인식함을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.507-510
• /
• 2003

In this paper, optical sensor system using PSD(Position Sensitive Detection) is proposed to obtain the three dimensional position of moving markers attached to human body. To find the coordinates of an moving marrer with stereo vision system, two different sight rays of an moving marker are required. Usually, those are acquired with two optical sensors synchronized at the same time. PSD sensor is used to measure the position of an incidence light in real-time. To get the three-dimension position of light source on moving markers, a conventional camera calibration method are used. In this research, we realized a low cost motion capture system. The proposed system shows high three-dimension measurement accuracy and fast sampling frequency.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.2
• /
• pp.181-187
• /
• 2014

In this study, a real-time evaluation system for quantitative dynamic fitting during pedaling was developed. The system is consisted of LED markers, a digital camera connected to a computer and a marker detecting program. LED markers are attached to hip, knee, ankle joint and fifth metatarsal in the sagittal plane. Playstation3 eye which is selected as a main digital camera in this paper has many merits for using motion capture, such as high FPS (Frame per second) about 180FPS, $320{\times}240$ resolution, and low-cost with easy to use. The maker detecting program was made by using Labview2010 with Vision builder. The program was made up of three parts, image acquisition & processing, marker detection & joint angle calculation, and output section. The digital camera's image was acquired in 95FPS, and the program was set-up to measure the lower-joint angle in real-time, providing the user as a graph, and allowing to save it as a test file. The system was verified by pedalling at three saddle heights (knee angle: 25, 35, $45^{\circ}$) and three cadences (30, 60, 90 rpm) at each saddle heights by using Holmes method, a method of measuring lower limbs angle, to determine the saddle height. The result has shown low average error and strong correlation of the system, respectively, $1.18{\pm}0.44^{\circ}$, $0.99{\pm}0.01^{\circ}$. There was little error due to the changes in the saddle height but absolute error occurred by cadence. Considering the average error is approximately $1^{\circ}$, it is a suitable system for quantitative dynamic fitting evaluation. It is necessary to decrease error by using two digital camera with frontal and sagittal plane in future study.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.11a
• /
• pp.1-1
• /
• 2009

In this presentation, I talk about various fluid simulation methods that have been developed for computer graphics special effects since 1996. They are all based on CFD but sacrifice physical reality for visual plausability and time. But as the speed of computer increases rapidly and the capability of GPU (graphics processing unit) improves, methods for more physical realism have been tried. In this talk, I will focus on four aspects of fluid simulation methods for computer graphics: (1) particle level-set methods, (2) particle-based simulation, (3) methods for exact satisfaction of incompressibility constraint, and (4) GPU-based simulation. (1) Particle level-set methods evolve the surface of fluid by means of the zero-level set and a band of massless marker particles on both sides of it. The evolution of the zero-level set captures the surface in an approximate manner and the evolution of marker particles captures the fine details of the surface, and the zero-level set is modified based on the particle positions in each step of evolution. (2) Recently the particle-based Lagrangian approach to fluid simulation gains some popularity, because it automatically respects mass conservation and the difficulty of tracking the surface geometry has been somewhat addressed. (3) Until recently fluid simulation algorithm was dominated by approximate fractional step methods. They split the Navier-Stoke equation into two, so that the first one solves the equation without considering the incompressibility constraint and the second finds the pressure which satisfies the constraint. In this approach, the first step introduces error inevitably, producing numerical diffusion in solution. But recently exact fractional step methods without error have been developed by fluid mechanics scholars), and another method was introduced which satisfies the incompressibility constraint by formulating fluid in terms of vorticity field rather than velocity field (by computer graphics scholars). (4) Finally, I want to mention GPU implementation of fluid simulation, which takes advantage of the fact that discrete fluid equations can be solved in parallel.

• Journal of Korea Multimedia Society
• /
• v.15 no.3
• /
• pp.323-335
• /
• 2012

In this paper, we propose an AR(augmented reality) system using user's bare hand based on computer vision. It is important for registering a virtual object on the real input image to detect and track correct feature points. The AR systems with markers are stable but they can not register the virtual object on an acquired image when the marker goes out of a range of the camera. There is a tendency to give users inconvenient environment which is limited to control a virtual object. On the other hand, our system detects fingertips as fiducial features using adaptive ellipse fitting method considering the geometric characteristics of hand. It registers the virtual object stably by getting movement of fingertips with determining the shortest distance from a palm center. We verified that the accuracy of fingertip detection over 82.0% and fingertip ordering and tracking have just 1.8% and 2.0% errors for each step. We proved that this system can replace the marker system by tacking a camera projection matrix effectively in the view of stable augmentation of virtual object.

• The Journal of the Korea Contents Association
• /
• v.11 no.1
• /
• pp.92-101
• /
• 2011

However, in order to create a stereoscopic 3D image, independently, it is required to spend expensive manufacturing costs and to have special techniques. As 3D display devices have been generalized, there is an increasing need for implementing a stereoscopic 3D image without a burden of expensive costs. This paper proposes some methods to implement stereoscopic 3D images easily by utilizing a marker tracking technology using a single camera. In addition, the study made it possible for the resolution of an image to be adjustable dynamically. This paper will be committed to the promotion of the field of UCC (User Created Contents) using stereoscopic 3D images by attracting the active participation of general users in the field of the implementation of stereoscopic 3D images.

• Computers and Concrete
• /
• v.31 no.5
• /
• pp.457-468
• /
• 2023

Buildings, bridges, and dams are examples of civil infrastructure that play an important role in public life. These structures are prone to structural variations over time as a result of external forces that might disrupt the operation of the structures, cause structural integrity issues, and raise safety concerns for the occupants. Therefore, monitoring the state of a structure, also known as structural health monitoring (SHM), is essential. Owing to the emergence of the fourth industrial revolution, next-generation sensors, such as wireless sensors, UAVs, and video cameras, have recently been utilized to improve the quality and efficiency of building forensics. This study presents a method that uses a target-based system to estimate the dynamic displacement and its corresponding dynamic properties of structures using UAV-based video. A laboratory experiment was performed to verify the tracking technique using a shaking table to excite an SDOF specimen and comparing the results between a laser distance sensor, accelerometer, and fixed camera. Then a field test was conducted to validate the proposed framework. One target marker is placed on the specimen, and another marker is attached to the ground, which serves as a stationary reference to account for the undesired UAV movement. The results from the UAV and stationary camera displayed a root mean square (RMS) error of 2.02% for the displacement, and after post-processing the displacement data using an OMA method, the identified natural frequency and damping ratio showed significant accuracy and similarities. The findings illustrate the capabilities and reliabilities of the methodology using UAV to evaluate the dynamic properties of structures.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.2
• /
• pp.325-332
• /
• 2022

In this study, real-time character navigation using AR lens developed by Nreal is developed. Real-time character navigation is not possible with general marker-based AR because NPC characters must guide while moving in an unspecified space. To replace this, a markerless AR system was developed using Digital Twin technology. Existing markerless AR is operated based on hardware such as GPS, gyroscope, and magnetic sensor, so location accuracy is low and processing time in the system is long, which results low reliability in real-time AR environment. In order to solve this problem, using the SLAM technique to construct a space into a 3D object and to construct a markerless AR based on point location, AR can be implemented without any hardware intervention in a real-time AR environment. This real-time AR environment configuration made it possible to implement a navigation system using characters in tourist attractions such as Suncheon Bay Garden and Suncheon Drama Filming Site.