• 해양환경안전학회지
• /
• 제30권1호
• /
• pp.32-42
• /
• 2024

본 연구에서는 해양공간 통합관리 수단의 지원책으로 활용되는 해양공간 정책 시뮬레이터 기술에 대한 한국, 중국, 일본, 미국, 유럽 등 주요 5개국에 대한 정량분석을 위한 유효특허 1,474건을 도출하고, 연도별, 국가별 특허출원 동향 및 워드 클라우드 분석을 통해 국내 기술 경쟁력 및 국내·외 기술 트렌드를 파악하였다. 분석 결과 해양공간 정책 시뮬레이터 기술의 경우 중국(1,254건, 85.1%) 주도의 특허출원이 활발하게 이루어지고 있으며, 세부 기술별로는 어업환경 변화예측 및 활용 시뮬레이터(AC)가 392건(26.6%)으로 가장 높은 것으로 나타난다. 핵심 키워드 변화를 통해 최근에는 다중 데이터의 수집과 데이터의 탐지, 예측, 평가 등으로 기술 트렌드가 이루어지고 있음을 확인하였으며, 중국 주도의 시장 독과점 및 선점에 대비하기 위해 주변 기술에 대한 특허출원 고려 및 표준화 선점 등의 연계 전략을 통한 대비와 정부 차원의 해양공간 정책 시뮬레이터 기술 연구개발에 대한 적극적인 정책적 지원이 필요함을 진단하였다.

• 한국항해항만학회지
• /
• 제35권5호
• /
• pp.401-406
• /
• 2011

경제적 여유와 함께 사람들의 요구가 다양화 되면서 해양 레저에 대한 관심이 증가하고 있다. 삼면이 바다인 우리나라는 바다를 이용한 해양 레저의 잠재력이 매우 높기 때문에 해양 리조트 개발이 증가할 것으로 예상된다. 그러나 이미 포화상태에 이르렀으며 또한 환경문제를 내포하고 있는 매립에 의한 개발은 상당한 어려움이 따를 것으로 예상된다. 이에 대한 대안으로 플로팅 건축에 의한 개발이 확대될 것으로 기대되지만 플로팅에 의한 해상호텔에 대한 연구는 아직 초보적인 단계에 있으며 이용객의 쾌적성에 직접적인 영향을 미치는 공조 설비 용량을 선정하기 위한 부하계산에 대한 연구는 전무하다고 할 수 있다. 본 연구에서는 육상의 일반적인 호텔과 선박의 공조부하 계산법을 비교 분석함으로써 해상호텔의 공조부하계산방법에 대해 검토한다.

• 수산해양기술연구
• /
• 제58권2호
• /
• pp.106-112
• /
• 2022

As a series of basic research to draw the pilot design measures for developing the habitat apparatus of Sulculus diversicolor supertexta inhabiting the coastal area of Jeju island, this study conducted a water tank experiment to understand the habitat marine environment of Sulculus diversicolor supertexta and the preference of habitat space focusing on the research fisheries performing the discharge of marine products. In the composition degree of marine algae in both fisheries, Donggwi-ri showed the highest gulfweed (79.3%) as brown algae and there were some coralline algae (17.2%) as red algae. Hansu-ri yielded the highest gulfweed (48.1%) as brown algae, which was followed by sea lettuce (10.4%) as green algae. In the preference of habitat space, the shelter angles 40° showed the highest adhesion as number of 82.9, which was followed by 60° and 70° as 69.2 and 68.2 respectively (P<0.05) by reviewing the environmental characteristics of habit of Salculus diversicolor supertexta in the coastal fishery of Jeju Island, when considering the adhesion rate in each of five shelters with different angles. In the future, there should be continuous research and monitoring for designing the fish shelters suitable for the coastal fisheries of Jeju island, and it would be also necessary to add the field-centered sustainable concrete research.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권4호
• /
• pp.472-484
• /
• 2002

To analyze the characteristics of air flow and $CO_2$ extinguishant transfer when extinguishant is injected into a closed space similar to marine engine room, a numerical simulation on a space was performed. Flow fields and $CO_2$ concentration fields are calculated according with the variation of the location & injection angle of nozzles. The results of simulation showed that the pattern of recirculation flow was affected greatly with the location & injection angle of nozzles and such a recirculation flow accelerated mass transfer of $CO_2$ and greatly affected the diffusion process of $CO_2$ extinguishant. It is considered that this result of this study can be useful to designing the arrangement of nozzles for the $CO_2$ fire fighting equipments in a marine engine room.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권3호
• /
• pp.328-336
• /
• 2002

decrease in efficiency due to cavity fluid fluctuation. The purpose of this study is to examine erosion aspect on the SS400 specimen by cavitation and the effect of impact pressure generated from the demolition of the cavity of ultrasonic vibrator horn in the marine sludge oil environment. The erosion damage of specimen was investigated mainly on weight loss, weight loss rate and maximum erosion rate with variation of the vibration amplitude of $50{\mu}m, 24{\mu}m$ as well as the change of space between transducer horn and specimen. The experimental results showed that as the space between ultrasonic vibrator horn and specimen disk increased, the weight loss and weight loss rate decreased and the values were larger in SFO than in SLO. These findings would help interpret the aspect of cavitation erosion damage in metallic materials of different operating environment and material characteristics.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권1호
• /
• pp.100-107
• /
• 1998

Ventilation of the marine engine room is very important for the health of the workers as well as the nomal operation of machines. To find proper ventilation conditions of this engine room, numerical simulation with standard k-.epsilon. model was carried out. In the present study, the marine engine room is considered as a closed space with a heat source and forced ventilation ducts. The injection angle of air supply is found to be important. Injection with downword angle depresses recirculation flow, causing a strong steam in the wider space of the room. Ventilation and removal of the released heat are promoted with this pattern. There is a possibility of local extreme heating at the upper surface of engine when supply and exhaust ports of air are in bilateral symmetry. The effect of the increase of exhaust port area on ventilation decreases as the number of supply port increases.

• 한국해양공학회지
• /
• 제16권3호
• /
• pp.28-33
• /
• 2002

Optimization of marine propellers of constant pitch is studied, with the help of the infinite dimensional optimization (Jang and Kinoshita, 2000a), which is based on the Hilbert space theory. As a numerical example, the MAU type propeller is considered and used as he initial guess for the optimization method. The numerical computations for an optimal marine propeller are performed for the constant pitch distribution. In addition, a new optimization is suggested with the constraint of constant pitch during optimization.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권2호
• /
• pp.351-356
• /
• 2001

In this paper, a general one-loop control system was assumed as a model system which has a time-delay element connected with a first order-lag element in series. After the corresponding parameter set causing stability limit condition for the model system was obtained by mathematical procedures, their loci on the parameter space was taken according of frequency change,. The parameter set loci of stability limit showed a specific pattern, and particularly the curves on the Kp-Ti parameter space were able to generalized in the form of an exponential formula. These properties were also compared with the results taken from experimental procedures by Nyquist response method and Ziegler & Nichols method on the time domain, and both results were confirmed to be nearly same.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.253-254
• /
• 2006

this paper suggest a new space vector PWM modulation method with short processing time which does not need idenfication of nearest three vectors(NTV) and duty calculation for each vector. The suggested PWM method makes mean value of phase voltage to be same as reference during every modulation period by use of a triangle in small hexagon on multi-level vector space. This paper described the suggested modulation method can be successfully applied to the space vector modulation use of multi-level inverter by computer simulations and experiments.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 추계학술대회 논문집(Proceeding of the KOSME 2000 Autumn Annual Meeting)
• /
• pp.135-142
• /
• 2000

The adjusting parameter set which enable control systems to locate on stability limit can be derived from theoretical or trial methods for an existing real system. The data from the results are much available to keep a system in the Proper stability condition even to site engineers who are inexperienced in the control system. In this paper, a general one loop control system was adopted for a model system the process of which was assumed to consist of a time-delay element and a first order-lag element in series. After obtaining the corresponding parameter set for the model system by mathematical procedures, their loci on the parameter space was taken according to frequency change. The parameter set loci of stability limit showed unique pattern, and particularity , the curves on the Kg-Ti parameter space were able to be generalized in the form of, an unique exponential formula. These properties were also compared with the results taken from experimental procedures by Nyquist response method and Ziegler & Nichols method on the time domain, and both results were confirmed to be nearly same.