• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.154-154
• /
• 2017

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.1
• /
• pp.1-8
• /
• 2015

We investigated the effect of monochromatic light emitting diode (LED) on the growth of diatoms Nitzschia sp., Phaeodactylum tricornutum, Skeletonema sp. and green algae Chlorella vulgaris. The four microalgae species were cultured under blue LED (450 nm), yellow LED (590 nm), red LED (650 nm) and fluorescent lamp (mixed wavelengths). The maximum growth rates and cell densities of Nitzschia sp., P. tricornutum and Skeletonema sp. were highest under blue LED, followed by fluorescent lamp, red LED and then yellow LED, however those of C. vulgaris were highest under red LED. This result indicates that blue LED is favorable for the growth of diatoms. Thus, the growth of microalgae under monochromatic light might be species-specific or taxon-specific. Also, these results could be used as an important information in future for remediation of heavy metal contamination in the sediments using LED and microalgae.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.6
• /
• pp.654-658
• /
• 2010

The purpose of this study is to establish methods for enhancing the survival and growth of cold-water fish and crustacean larvae based on the nutritional components of zoo and phyto live foods. Rotifers, Brachionus rotundiformis, were cultured with a supplement of freshwater condensed Chlorella vulgaris at $28^{\circ}C$ and enriched with Algamac $2000^{(R)}$ at 16, 20 and $26^{\circ}C$, respectively. Isochrysis galbana, Chaetoceros calcitrans and Chlorella ellipsoidea were centrifuged for component analysis after being cultured for approximately one week with conway medium at $20^{\circ}C$. The crude protein and lipid contents of the rotifers were 58.4% and 10.9%, respectively, before enrichment. After enrichment at each temperature, total protein and essential amino acid contents were increased by reducing the enrichment temperature. However, unsaturated fatty acids and multiple fatty acid index (UI) showed their highest values at $20^{\circ}C$. Mono-unsaturated fatty acid content was highest (72.6%) at $16^{\circ}C$. The total protein contents of C. calcitrans and C. ellipsoidea were higher, 33.0% and 35.2%, respectively, than that of I. galbana, 27.8%. Methionin, leusine and histidine, essential amino acids of C. ellipsoidea, had considerably higher values, 50.2, 287.2 and 68.1 mg/g dry matter, respectively, compared to other microalgae. Total lipids, UI, DHA and n-3 PUFA of I. galbana had higher values, 23.6, 272.0, 12.9% and 45.2%, respectively, than other microalgae. Therefore, for cold-water fish and crustacean larvae that require high n-3 PUFA and DHA contents, enrichment of rotifers is desirable at $20^{\circ}C$. Fish larvae would also need more I. galbana than other microalgae.

• Journal of Marine Bioscience and Biotechnology
• /
• v.6 no.2
• /
• pp.131-137
• /
• 2014

Ultraviolet-B radiation (UV-B) in sunlight causes biological damages such as erythema and blister on skin. Microalgae have been in the limelight as an attractive feedstock for manufacturing functional materials. This study focused on screening microalga with protection ability against UV-B. The microalgae were isolated from local areas on April to June 2013 as well as June 2014. The cells were grown under continuous illumination from fluorescent lamps at $136.3{\pm}2.2{\mu}E/m^2/s$ in BG-11 medium at $15^{\circ}C$ for 12-14 days. The selected cells were spread on BG-11 agar and were exposed to UV-B (312 nm) for 20 and 25 minutes. The 13 strains among selected algae were classified. Among these, 9 strains were Scenedesmus sp. and the remains were Chlorella sp. Based on this study, it seems that Scenedesmus sp. and Chlorella sp. have resistibility against ultraviolet. These results will help to study on UV protection using microalgae.

• ALGAE
• /
• v.39 no.2
• /
• pp.109-127
• /
• 2024

High production and efficient harvesting of microalgae containing high omega-3 levels are critical concerns for industrial use. Aeration can elevate production of some microalgae by providing CO₂ and O₂. However, it may lower the production of others by generating shear stress, causing severe cell damage. The mixotrophic dinoflagellate Gymnodinium smaydae is a new, promising microalga for omega-3 fatty acid production owing to its high docosahexaenoic acid content, and determining optimal conditions and methods for high omega-3 fatty acid production and efficient harvest using G. smaydae is crucial for its commercial utilization. Therefore, to determine whether continuous aeration is required, we measured densities of G. smaydae and the dinoflagellate prey Heterocapsa rotundata in a 100-L semi-continuous cultivation system under no aeration and continuous aeration conditions daily for 9 days. Furthermore, to determine the optimal conditions for harvesting through centrifugation, different rotational speeds of the continuous centrifuge and different flow rates of the pump injecting G. smaydae + H. rotundata cells into the centrifuge were tested. Under continuous aeration, G. smaydae production gradually decreased; however, without aeration, the production remained stable. Harvesting efficiency and the dry weights of omega-3 fatty acids of G. smaydae + H. rotundata cells at a rotational speed of 16,000 rpm were significantly higher than those at 2,000-8,000 rpm. However, these parameters did not significantly differ at injection pump flow rates of 1.0-4.0 L min^-1. The results of the present study provide a basis for optimized production and harvest conditions for G. smaydae and other microalgae.

• Journal of Marine Bioscience and Biotechnology
• /
• v.9 no.2
• /
• pp.35-42
• /
• 2017

Hydrothermal liquefaction of lipid-extracted Tetraselmis sp. feedstock containing 80 wt.% water was conducted in a batch reactor at different temperatures (300, 325, and $350^{\circ}C$) and reaction times (5, 10, 20, 40, and 60 min). The biocrude yield, elemental composition and higher heating value obtained at various reaction conditions were used to predict the optimum conditions for maximizing energy recovery of biocrude with good quality. A maximum energy recovery of 67.6% was obtained at $325^{\circ}C$ and 40 min with a high energy density of 31.8 MJ/kg and lower contents of nitrogen and oxygen. Results showed that reaction conditions of $325^{\circ}C$, 40 min was most suitable for maximizing energy recovery while at the same time achieving improved quality of biocrude.

• Journal of Marine Bioscience and Biotechnology
• /
• v.11 no.1
• /
• pp.23-28
• /
• 2019

For successful microalgal biodiesel production, the strain should be selected carefully. Fast growth rate and high fatty acid contents are desired traits for algal biodiesel production. In ocean cultivation of microalgae, seawater temperature slowly changes over seasons, and rotating algal strains in accordance with their optimal temperature could improve overall productivity. Additionally, use of indigenous strain is preferred to alleviate potential impacts on the environment. In this study, five strains of Tetraselmis sp. from nearshore of Youngheung Island, Incheon, Korea, were isolated during winter and characterized for their growth patterns and fatty acid compositions in the low temperatures ($5-15^{\circ}C$). The five strains showed various characteristics in optimal growth temperature, fatty acid contents, and compositions. Compared with a strain of Tetraselmis sp., isolated from Ganghwa island in a previous study, a rapid-growing strain with 237% higher biomass productivity and an oleaginous strain with twice higher fatty acid contents at $10^{\circ}C$ were isolated. The oleaginous Tetraselmis strain showed the highest fatty acid productivity among the strains, having 438% higher productivity than the previous strain. Using the new isolates in the seasons with low seawater temperature would improve microalgal fatty acid productivity in ocean cultivation.

• KSBB Journal
• /
• v.26 no.5
• /
• pp.443-452
• /
• 2011

In this study, inorganic flocculant with biodegradable polymer flocculant was usedfor microalgae harvest. The aim of this study was to optimize the concentration of inorganic flocculant, the concentration of biodegradable polymer flocculant and reaction volume for decreasing the amounts of flocculant and obtaining the suitable pH range for seawater by response surface methodology. The flocculation of three marine microalgae, Chlorella ellipsoidea, Dunaliella bardawil, and Dunaliella tertiolecta, using inorganic flocculants and biodegradable polymer flocculants was investigated. The results indicated that the optimal flocculant quantity showed 0.1 g/L of ferric chloride, 7.5 g/L of chitosan on Chlorella ellipsoidea. In the case of Dunaliella bardawil, the optimal flocculant quantity showed amount of ferric sulfate more than 0.12 g/L and chitosan more than 0.75 g/L. In the case of Dunaliella tertiolecta, the optimal flocculant quantity showed 1.0 g/L of sodium aluminate, 0.75 g/L of chitosan.

• ALGAE
• /
• v.28 no.2
• /
• pp.131-147
• /
• 2013

Major progress has been made in the past decade towards understanding of the biosynthesis of red carotenoid astaxanthin and its roles in stress response while exploiting microalgae-based astaxanthin as a potent antioxidant for human health and as a coloring agent for aquaculture applications. In this review, astaxanthin-producing green microalgae are briefly summarized with Haematococcus pluvialis and Chlorella zofingiensis recognized to be the most popular astaxanthin-producers. Two distinct pathways for astaxanthin synthesis along with associated cellular, physiological, and biochemical changes are elucidated using H. pluvialis and C. zofingiensis as the model systems. Interactions between astaxanthin biosynthesis and photosynthesis, fatty acid biosynthesis and enzymatic defense systems are described in the context of multiple lines of defense mechanisms working in concert against photooxidative stress. Major pros and cons of mass cultivation of H. pluvialis and C. zofingiensis in phototrophic, heterotrophic, and mixotrophic culture modes are analyzed. Recent progress in genetic engineering of plants and microalgae for astaxanthin production is presented. Future advancement in microalgal astaxanthin research will depend largely on genome sequencing of H. pluvialis and C. zofingiensis and genetic toolbox development. Continuous effort along the heterotrophic-phototrophic culture mode could lead to major expansion of the microalgal astaxanthin industry.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.2
• /
• pp.130-137
• /
• 2011

To improve sediment quality in eutrophic coastal areas using benthic microalgae, we examined the effects of temperature and salinity on the growth of benthic microalgae Achnanthes sp., Amphora sp., Navicula sp. and Nitzschia sp. isolated from Sujeong Bay, Korea, using batch cultures. The maximum growth rates were obtained under the combined temperature and salinity conditions of $25^{\circ}C$ and 25 psu for Achnanthes sp. (0.60 /day), $15^{\circ}C$ and 25 psu for Amphora sp. (0.56 /day), $20^{\circ}C$ and 30 psu for Navicula sp. (0.53 /day), $20^{\circ}C$ and 25 psu for Nitzschia sp. (0.48 /day). Considering these results of temperature and salinity conditions required for optimum growth (${\geq}$ 70% of maximum specific growth rate), Amphora sp. Navicula sp. and Nitzschia sp. were characterized as eurythermal and euryhaline species, while Achnanthes sp., which exhibited extremely low survival at low temperature. In conclusion, Amphora sp., Navicula sp. and Nitzschia sp. may be useful species for phytoremediation, to control eutrophication and hypoxic water and thus improve environmental conditions of polluted coastal areas.