• Environmental and Resource Economics Review
• /
• v.22 no.3
• /
• pp.459-479
• /
• 2013

To assess the feasibility of 'low carbon, sustainable growth' policy pursued of the Chinese government, this paper first measures technical efficiency, $CO_2$ shadow prices, and indirect Morishima elasticity of substitution between capital and energy for 24 of manufacturing sectors in Beijing and Chongqing, in which China launched pilot carbon emissions trading scheme, by estimating the input distance function. Based on these results, then the potential for $CO_2$ reduction, cost savings from emissions trading, and the effectiveness of capital investment in reducing $CO_2$ are compared across industries and provinces. In 2010, manufacturing industries in Beijing and Chongqing could potentially reduce the largest $CO_2$ emissions, amounting 5.2 and 17 million tons, respectively, by achieving 100% technical efficiency. While, on average, Chongqing has a comparative advantage in the cost savings from carbon trading over Beijing, Beijing is more likely to reduce $CO_2$ by expanding capital investment.

• Journal of Korean Society of Transportation
• /
• v.25 no.2 s.95
• /
• pp.121-132
• /
• 2007

This paper addressed the issue of a generalized cost model for transit assignment. The model composed of walk time, waiting time (including transfer waiting time), line-haul time, transfer walk time, and fare. The weights of each component were supposed to be calculated using the stated preference (SP) data, which were collected prudently in order to reflect reality. The marginal rate of substitution and wage rate were applied to calculate the weights. The results showed that the weight of walking time per in-vehicle travel time (IVTT) was 1.507, the weight of waiting time (per IVTT) was 1.749, that of transfer time (per IVTT) was 1.474, and that of fare (per IVTT) was 1.476 for trips between inner-city areas in Seoul. Weights for each component were identified as 1.871, 1.967, 1.015, and 0.857, respectively, for trips between Seoul and Gyeonggi. Statistical significance existed between two cases and each variable was also statistically significant. Transit assignment using the relative weights estimated in this study was implemented to analyze the travel index in a macroscopic and quantitative basis. The results showed that average total travel times were 30.23 minutes and 63.29 minutes and average generalized costs were 2,510 won and 3,880 won for trips between inner-city areas in Seoul and between Seoul and Gyeonggi, respectively.

• Environmental and Resource Economics Review
• /
• v.14 no.4
• /
• pp.817-838
• /
• 2005

In this paper, the resource adequacy as well as the optimum fuel mix is obtained by the following procedures. First, the regulation body, the government agency, determine the reliability index as well as the optimum portfolio of the fuel mix during the planning horizon. Here, the resources with the characteristics of public goods such as demand-side management, renewable resources are assigned in advance. Also, the optimum portfolio is determined by reflecting the economics, environmental characteristics, public acceptance, regional supply and demand, etc. Second, the government announces the required amount of each fuel-type new resources during the planning horizon and the market participants bid to the government based on their own estimated fixed cost. Here, the government announces the winners of the each auction by plant type and the guaranteed fixed cost is determined by the marginal auction price by plant type. Third, the energy market is run and the surplus of each plant except their cost (guaranteed fixed cost and operating cost) is withdrew by the regulatory body. Here, to induce the generators to reduce their operating cost some incentives for each generator is given based on their performance. The performance is determined by the mechanism of the performance-based regulation (PBR). Here the free-riding performance should be subtracted to guarantee the transparent competition. Although the suggested mechanism looks like very regulated one, it provides two mechanism of the competition. That is, one is in the resource construction auction and the other is in the energy spot market. Also the advantages of the proposed method are it guarantee the proper resource adequacy as well as the desired fuel mix. However, this mechanism should be sustained during the transient period of the deregulation only. Therefore, generation resource planning procedure and market mechanisms are suggested to minimize possible stranded costs.

• Korean Journal of Agricultural Science
• /
• v.35 no.1
• /
• pp.85-100
• /
• 2008

The United States Department of Agriculture (USDA) funded collaborative project on The Economic Feasibility Analysis of Crop Cultivation Practice Project in Pirganj and Kurigram Districts in Bangladesh will started during 2008-2012, for 4 years with total project cost of US$ 571,270. The project will be implemented in 6 villages; has 1,097 hectares areas which is divided into 948 hectares of agricultural land, 52 hectares of forest land and 345 hectares of other land, covered 1,059 households equal to 5,305 persons in Pirganj and Kurigram districts The project has proposed to be implemented in joint collaboration by Bangladesh Agricultural Research Council (BARC), Bangladesh Agricultural Research Institute (BARI) and Rangpur Dinajpur Rural Service (RDRS) Bangladesh with full participation of the farmers' groups of respective project site. The specific objectives of the project are: (1) to estimate the productivity of paddy, wheat, maize, tobacco and sugarcane (2) to determine the cost of production and returns to the above mentioned crops (3) to study the interrelationship between inputs and output of the above mentioned crops and (4) to examine the resource utilization patterns at farm level. In this project analysis, the net incremental profit is US$33,028. The expected incremental project benefit and incremented production cost are estimated as US$ 219,959 and US$ 186,931 respectively. The financial decision making criteria would be followed in this crop cultivation practice project. After the project implementation, the expected project benefits are assumed to be continued for 15 years. The benefit cost ratio (B/C) of the project is estimated at 1.077 (table 11) when using discount rate of 10% as an opportunity cost of capital in Bangladesh. FIRR of project is estimated at 26.15% which is bigger than the opportunity cost by more than double. So this project is financially feasible and acceptable. Therefore, this project should be extended to other areas to increase the farm income and economic growth of marginal poor farmers in Bangladesh.

• Korean Journal of Organic Agriculture
• /
• v.18 no.2
• /
• pp.233-244
• /
• 2010

This experiment was conducted to evaluate two different types of feed additive as an alternative for antibiotics on growth performance and feed cost in growing and finishing pigs. One additive is an herb extract, with Fenugreek (Trigonella foenum graecum) as the main component, while the other feed additive contains aminolevulinic acid (ALA). In the first experiment, 128 grower pigs were allotted to 4 different treatment groups and replicated 4 times with 8 pigs per replicate; the trial lasted for 28 days. The positive control group (PC) which is the control group supplemented with antibiotics was significantly higher (p<0.05) in growth rate (580.6 g/d) followed by the ALA group (532.0 g/d), there was no significant differences in terms of feed intake and feed efficiency. There were marginal reductions in feed costs measured as feed cost per head in ALA and HE added diet. However, the feed cost per weight gain of ALA treatment was higher than the control group (PC) supplemented with antibiotics. In the second experiment, 80 finisher pigs were allotted to 4 treatment groups and replicated 4 times with 5 pigs per replicate; the trial lasted for 70 days. The treatment group supplemented with an herb extract (HE) had a significantly higher (p<0.05) feed intake (2,415.8 g/d) compared to the other treatment groups, but there was no significant differences in terms of growth rate and feed efficiency. Feed cost per head in HE and ALA treatments were higher than PC treatment, and feed cost per weight gain of HE was higher than PC treat (p<0.05). The results from these experiments suggests that these two types of feed additives can both be used as an alternative for antibiotics without having a negative effect on the performance of the animals. And aminolevulinic acid was good in performance and production cost of grower and finisher pigs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.1992-1998
• /
• 2014

This paper aims to understand the meaning of balanced development among regional economies and its importance in the s0-called knowledge-based economy. It is shown that the balanced allocation of human capital is necessary to achieve the efficient allocation of physical capital among regional economies, which makes the equality of marginal product of capital. And a simulation experiment is conducted to calculate the cost of unbalanced growth. It is shown that balanced growth among regional economies may increase the growth rate of whole national economy while unbalanced growth among them reduce it. The policy implication is that for an any economy to grow at a higher rate, the efficient allocation of physical and human capital both are necessary to have the balanced growth of regional economies in knowledge-based economy.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.5
• /
• pp.586-596
• /
• 1998

The relevance and importance of buffalo production under coconut plantations in the North Westen Province of Sri Lanka was studied in three districts (Bingiriya, Pannala, Kuliyapitiya). The objective of the study was to collect baseline information on socioeconomic and cultural aspects of buffalo production, with a view to promote and disseminate new technologies. The survey technique used consisted of a formal survey using a structured questionnaire (71 households) and rapid appraisal (55 households). The results indicate the existence of a wide stratification of dariy farmers which ranged from skilled dairy operators with high levels of production and management of efficiency to marginal subsistence farmers with low levels of productivity. The most frequent family size of households ranged from 4-5 members (58%), and the average family size was 4.7. The actual average land ownership accounts to 2.4 ha of upland and 0.5 ha of lowland, but when their accessibility to common property resources are taken into account, the land availability was assessed at 13 ha and 0.7 ha of upland and lowland, respectively. The highest average monthly income (Rs. 13,590) was received by farmers with off-farm employment (primary) who are also engaged in livestock production (secondary), and livestock contributed 43% of the total income. Livestock farmers who practised integrated crop farming as a secondary source of income received a monthly income of Rs. 10,843, and those involved in crop production as the primary source received the lowest average income (Rs. 7,295). The survey revealed a high investment cost on concentrate feeds (47%) for milk production. However some farmers obtained higher milk yields (11 litres/cow/day) at lower ration costs, and this could be attributed to the entrepreneurship skills and management efficiency. The study area had a well developed market infrastructure for fresh milk, principally due to the existence of the Nestle's company and the Coconut Triangle Milk Union. On an average the producer collected Rs. 10 per litre of milk marketed.

• Geomechanics and Engineering
• /
• v.13 no.1
• /
• pp.25-41
• /
• 2017

In recent years, the amount of sludge ash (SA) has considerably increased due to rapid urbanization and population growth. In addition, its storage in landfills induces environmental pollution and health problems. Therefore, its disposal in an environmentally friendly way has become more important. The main goal of this study is to investigate the reusability of sludge ash as an additive with polypropylene fiber (PF) to stabilize marginal sand based on the compressive strength performances from UCS tests. For this purpose, a series of UCS tests was conducted. Throughout the experimental study, the used inclusion rates were 10, 15, 20 and 30% for sludge ash and 0, 0.5 and 1% for polypropylene fiber by total dry weight of the sand+sludge ash mixture and the prepared samples were cured for 7 and 14 days prior to the testing. Freezing and thawing resistance of the mixture including 10% sludge ash and 0, 0.5 and 1% polypropylene fiber was also examined. On the basis of UCS testing results, it is said that sludge ash inclusion remarkably enhances UCS performance of sand. Moreover, the addition of polypropylene fiber to the admixtures including sand and sludge ash significantly improves their stress-strain characteristics and post-peak strength loss as well as UCS. As a result of this paper, it is suggested that sludge ash be successfully reused with polypropylene fiber for stabilizing sand in soil stabilization applications. It is also believed that the findings of this study will contribute to some environmental concerns such as the disposal problem of sludge ash, recycling, sustainability, environmental pollution, etc. as well as the cost of an engineering project.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.3
• /
• pp.186-199
• /
• 2012

Purpose: Single implants, of which screw loosening has been observed frequently, presents problems such as fixtures fractures, marginal bone loss, and inflammation of the soft tissue around the implant. However, the single implant is more conservative, cost effective, and predictable compared to the 3 unit bridge with respect to the long-term outcome. This study evaluated the survival rate as well as future methods aimed at increasing the survival rate in single implants in posterior teeth. Methods: Among the implants placed in the Dankook University Dental Hospital department of Oral & Maxillofacial surgery from January 2001 to June 2008, 599 implants placed in the maxillar and mandibular posterior were evaluated retrospectively. Survival rates were investigated according to implant location, cause of tooth loss, gender, age, general disease, fixture diameter and length, surface texture, implant type and shape, presence of bone graft, surgery stage, surgeons, bone quality and opposite teeth. Results: Out of 599 single implants in posterior teeth, 580 implants survived and the survival rate was 96.8%. The difference in survival rate was statistically significant according to the implant location. The survival rate was low (84.2%) in implants exhibiting a wide diameter (${\geq}5.1mm$) and the surface treated by the acid etching group demonstrated a significantly lower survival rate (91.1%). One stage surgical procedure, which implemented a relatively better bone quality survival rate (100%), was higher than the two stage surgical procedure (96.1%). The survival rate of type IV bone quality (75%) was significantly lower than the other bone quality. Conclusion: Single posterior teeth implant treatments should use an improved surface finishing fixture as well as careful and safe procedures when performing implant surgery in the maxilla premolar and molar regions since bone quality is poor.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.4
• /
• pp.860-877
• /
• 2013

Cloud computing has become one of the most important technologies for reducing cost and increasing productivity by efficiently using IT resources in various companies. The cloud computing system has mainly been built for private enterprise, but public institutions, such as governments and national institutes, also plans to introduce the system in Korea. Various researches have pointed to security problems as a critical factor to impede the vitalization of cloud computing services, but they only focus on the security threats and their correspondents for addressing the problems. There are no studies that analyze major security issues with regard to introducing the cloud computing system. Accordingly, it is necessary to research the security factors in the cloud computing given to public institutions when adopting cloud computing. This research focuses on the priority of security solutions for the stepwise adoption of cloud computing services in enterprise environments. The cloud computing security area is classified into managerial, physical and technical area in the research, and then derives the detailed factors in each security area. The research derives the influence of security priorities in each area on the importance of security issues according to the identification of workers in private enterprise and public institutions. Ordered probit models are used to analyze the influences and marginal effects of awareness for security importance in each area on the scale of security priority. The results show workers in public institutions regard the technical security as the highest importance, while physical and managerial security are considered as the critical security factors in private enterprise. In addition, the results show workers in public institutions and private enterprise have remarkable differences of awareness for cloud computing security. This research compared the difference in recognition for the security priority in three areas between workers in private enterprise, which use cloud computing services, and workers in public institutions that have never used the services. It contributes to the establishment of strategies, with respect to security, by providing guidelines to enterprise or institutions that want to introduce cloud computing systems.