• Journal of Nutrition and Health
• /
• 제22권2호
• /
• pp.91-101
• /
• 1989

This study was performed to investigate the effects of different dietary magnesium levels on systolic blood pressure and mineral distribution in normotensive and spontaneously hypertensive rats. In experiment 1, Normotensive rats(NTR ; Sprague Dawley, Female) were given diets containing regular magnesium (0.05% Mg ; rMg), marginal magnesium (0.01% Mg ; mMg) or marginal magnesium with stress(0.01% Mg + stress ; mMg + Str). In experiment 2, spontaneously hypertensive rats (SHR ; Kyoto Wistar, Femal) were fed diets containing regular magnesium(0.05% Mg ; rMg) and high magnesium (0.2% Mg ; hMG). The following were found ; 1) NTR treated with marginal magnesium with stress showed significant increase in systolic blood pressure (SBP). Marginal magnesium diet without stress resulted in nonsignificant increase in SBP. Significant in crease of blood pressure showed in NTR treated with marginal magnesium and stress was associated with decreased magnesium and increased calcium content in femur, reticulocyte and plasma. 2) In experiment 2, magnesium supplementation to SHR showed significant attenuation of their systolic blood pressure with increasing age. The attenuation of SBP showed in SHR was associated with increased magnesium, lowered calcium content in cardiac muscle and reticulocyte and decreased plasma sodium and aldosterone level.

• Journal of Nutrition and Health
• /
• 제28권5호
• /
• pp.442-450
• /
• 1995

This study determined plasma glucose, free fatty acid(ffa), epinephrine, norepinephrine, creatine the phosphokinase(CPK), calcium (Ca), magnesium(Mg) and hydroxyproline, Ca and Mg in the heart muscle. Thirty six male Sprague Dawley rats average weighing 110g divided into two diet group : normal Mg group(0.05% Mg), Marginal Mg group(0.005% Mg). After the rats were on experimental diets for 2 weeks, rats for each group were randomly assigned to stress and no stress group and 30 minutes IMMB stress was administered to stress group every day for two weeks. The following were found : 1) Rats fed normal magnesium diet showed decreased plasma glucose and non signficant change in norepinephrine and CPK with IMMB stress, while magnesium deficient rats showed elevated plasma glucose, norepinephrine and CPK with stress. 2) Myocardial hydroxyproline and plasma epinephrine were not significantly different among groups. 3) In the rats fed adequate magnesium, stress increased plasma magnesium while rats on marginal magnesium diet did not show significant change with stress. 4) Plasma and myocardial calcium were increased in rats fed marginal Mg diet, but did not show any significant difference with stress.

• The Journal of Advanced Prosthodontics
• /
• 제14권4호
• /
• pp.250-261
• /
• 2022

PURPOSE. The purpose of this study was to analyze the marginal fit of three-unit resin prostheses printed with the stereolithography (SLA) method in two build orientations (45°, 60°) and two layer thicknesses (50 ㎛, 100 ㎛). MATERIALS AND METHODS. A master model for a three-unit resin prosthesis was designed with two implant abutments. Forty specimens were printed using an SLA 3D printer. The specimens were printed with two build orientations (45°, 60°), and each orientation was printed with two layer thicknesses (50 ㎛, 100 ㎛). The marginal fit was measured as the marginal gap (MG) and absolute marginal discrepancy (AMD), and MG and AMD measurements were performed at 8 points per abutment, for 16 points per specimen. All statistical analyses were performed using SPSS software. Two-way analysis of variance (ANOVA) was separately performed on the MG and AMD values of the build orientations and layer thicknesses. Moreover, one-way ANOVA was performed for each point within each group. RESULTS. The margins of the area adjacent to the pontic showed significantly high values, and the values were smaller when the build orientation was 45° than when it was 60°. However, the margin did not differ significantly according to the layer thicknesses. CONCLUSION. The marginal fit of the three-unit resin prosthesis fabricated by the SLA 3D method was affected by the pontic. Moreover, the marginal fit was affected by the build orientation. The 45° build orientation is recommended.

• 구강회복응용과학지
• /
• 제29권4호
• /
• pp.366-376
• /
• 2013

구강내 스캔(Group 1), 모델 광학 스캔(Group 2)과 모델 접촉식 스캔(Group 3)방식으로 각각 zirconia 코핑을 제작하여 광학 현미경으로 적합성을 관찰하였다. 측정항목은 변연오차(absolute marginal discrepancy;AMD), 변연간극(marginal gap; MG), 측방간격(gap of axial wall; GA), 선각간격(gap of line angle; GL)와 교합간격(gap of occusal surface; GO)이었으며, 결과는 아래와 같았다. 1. Group 1, Group 2, Group 3의 평균 AMD는 각 각 $141.21{\pm}42.94{\mu}m$, $140.63{\pm}31.64{\mu}m$, $109.37{\pm}28.42{\mu}m$이고, Group1, Group 2, Group 3의 MG는 각 각 $82.52{\pm}43.99{\mu}m$, $90.28{\pm}27.93{\mu}m$, $66.55{\pm}28.77{\mu}m$였다. AMD와 MG는 각 그룹에서 통계학적으로 유의한 차이를 보여주지 않았다(Anova test, P>0.05). 2. Group 2의 GA가 Group 1과 Group 3에 비해 통계학적으로 유의하게 적은 수치를 나타내었다(Anova test, P<0.05). 3. Group 1의 GL과 GO가 다른 그룹에 비해 통계학적으로 높은 수치를 나타내었다(Mann-whitney test(P<0.05). 세 가지 스캔 방식으로 제작된 zirconia 코핑은 세라믹 보철의 가장 중요한 평가 요소인 AMD와 MG에서 서로 통계학적 차이를 보이지 않았다.

• Journal of Ginseng Research
• /
• 제13권1호
• /
• pp.105-113
• /
• 1989

This study was conducted to determine the cause of the occurence of marginal leaf chlorosis in ginseng plants (Panax ginseng C.A. Meyer), and to determine its emersion in fields (practically) and in pots (experimentally). The following results were obtained. In the Present investigation, ginseng plants raised in acidic soil containing a high a moue t of Mn showed marginal leaf chlorosis. Henre it Ivas suggested that the shoot growth and root weights became grad gractually lower. The leaves having marginal leaf chlorosis contained low amounts of N, P,. Ca, Mg, and Na and the Fe/Mn ratios were low. There was a corresponding increase in Mn uptake. It was founrl that in soils where marginal leaf chlorisis occured the pH urar brlolv 4.2 to 4.9 and the Ca, Mg and Na content was decreased thus effectively increasing the available manganese in the soil. The Mn/Fe ratios in the yellow leaf margins of ginseng Plants affected by the Mn toxicity was over 2.0 compared to the general Mn/Fe ratio of 0.50 for healthily leaves, stems and roots. Typically when ginseng plants grow fields having soil with a pH below about 5.0, there tenor to be an uptake of excess Mn. When ginseng plants are grown in a nutrient sand culture solution It with an increased Mn concentration, they accumulate large amounts of Mn in the roots and in the shoots. In both casts marginal leaf chlorosis appeared in the emersions. In the Present investigation, ginseng plants raised in acidic soil and containing a high amount of Mn showed marginal leaf chlorosis.

• The Journal of Advanced Prosthodontics
• /
• 제12권4호
• /
• pp.225-232
• /
• 2020

PURPOSE. This study aimed to fabricate provisional crowns at varying build directions using the digital light processing (DLP)-based 3D printing and evaluate the marginal and internal fit of the provisional crowns using the silicone replica technique (SRT). MATERIALS AND METHODS. The prepared resin tooth was scanned and a single crown was designed using computer-aided design (CAD) software. Provisional crowns were printed using a DLP-based 3D printer at 6 directions (120°, 135°, 150°, 180°, 210°, 225°) with 10 crowns in each direction. In total, sixty crowns were printed. To measure the marginal and internal fit, a silicone replica was fabricated and the thickness of the silicone impression material was measured using a digital microscope. Sixteen reference points were set and divided into the following 4 groups: marginal gap (MG), cervical gap (CG), axial gap (AG), and occlusal gap (OG). The measurements were statistically analyzed using one-way ANOVA and Dunnett T3. RESULTS. MG, CG, and OG were significantly different by build angle groups (P<.05). The MG and CG were significantly larger in the 120° group than in other groups. OG was the smallest in the 150° and 180° and the largest in the 120° and 135° groups. CONCLUSION. The marginal and internal fit of the 3D-printed provisional crowns can vary depending on the build angle and the best fit was achieved with build angles of 150° and 180°.

• 한국산학기술학회논문지
• /
• 제16권10호
• /
• pp.6611-6617
• /
• 2015

본 연구는 수작업으로 제작된 metal coping과 CAD/CAM(Computer Aided Design/Computer Aided Manufacturing)으로 제작된 지르코니아 coping을 제작하여 변연과 내면 적합도를 비교 분석하고자 하였다. 모형은 우레탄 모형재를 사용하여 knife, chamfer변연 두 종류의 지대치를 제작하였다. 수작업과 CAD/CAM으로 제작된 보철물의 변연 적합도를 실리콘 리플리카 테크닉방법을 사용하여 측정하였다. 적합도 측정은 현미경의 CCD카메라로 캡쳐하였다. 이때 지대치와 보철물의 거리는 이미지분석 소프트웨어에서 거리 조정이 된 상태에서 실시하였다. 측정부위는 marginal opening을 MO, marginal gap을 MG, internal gap을 IG, Axial gap을 AG, occlusal gap을 OG로 하였다. 제작법과 변연 형태에 따른 비교분석을 위해 이원배치분산분석을 실시하였으며 서로 다른 평균값들의 비교 분석을 위해서 일원배치분산분석과 Scheffe's 사후 검정을 실시하였다. 그 결과 CAD/CAM의 OG와 knife 변연의 MO을 제외하고는 < $120{\mu}m$ 적합도를 나타냈다. CAD/CAM으로 제작된 coping은 chamfer 변연 MO에서 높은 적합도를 보였으나 MG에서는 knife변연이 chamfer변연 보다 더 좋은 적합도를 보였다. AG의 내면 적합도는 가장 좋은 값을 나타내었다(< $38{\mu}m$).

• 대한치과보철학회지
• /
• 제50권3호
• /
• pp.176-183
• /
• 2012

연구 목적: 부분 무치악 환자에서 Mg titanate implant (M Implant system, Shinhung, Korea)의보철 후 1년간의 방사선사진을 이용한 변연골 흡수량과 Osstell$^{(R)}$을 이용한 임플란트 안정성 평가 결과를 분석하여 임상적인 성공률에 대해 알아보고자 한다. 연구 재료 및 방법: 38명의 환자에 79개의 임플란트를 식립하여 보철 후 1년 동안 변연골 흡수량, 임플란트의 동요도, 임플란트 식립 위치에 따른 분포 및 성공률, 보철 전후에 따른 성공률을 분석했다. 결과: 변연골의 흡수량은 보철물 장착 후 1년간의 평가에서 상악에서는 평균 1.537 mm, 하악에서는 평균 1.172 mm의 변연골 흡수가 관찰되었으며, 전체적인 상하악의 평균 변연골 흡수량은 1.255 mm로 관찰되었다. 수술 후 시간이 경과함에 따라 ISQ값은 미약하게 감소하였다가 증가하는 경향을 보였으나, 상악과 하악 모두에서 식립 당일 이후 예비 인상일, 최종 보철물의 장착일과 주기적인 평가 기간 동안 ISQ값의 큰 증가나 감소를 나타내지는 않았다. 성공률은 상악에서의 94.12%였고, 하악에서의 98.39%였다. 결론: 본 실험의 결과로 미루어 Mg titanate implant는 임상적으로 양호한 결과를 보여주었다.

• Journal of Ginseng Research
• /
• 제14권1호
• /
• pp.44-49
• /
• 1990

Effect of liming material application on the prevention or cure of Mn toxicity symptoms including marginal leaf chlorosis in 3-year-old ginseng plants grown in acidic soils were investigated. It was found that the ratio of Fe to Mn was above about 0.5 and the ratio of Mn to Fe was below about 2.00 in 4-year old ginseng leaves when liming materials were applied in field experiments. It was apparent that the occurrence of marginal leaf chlorosis was decreasing affected by application of Ca, Mg and Fe. The appearance of marginal leaf chlorosis was decreased to about 78 percent in 4-year-old ginseng and to about 69 percent in 5-year-old ginseng, and then the fresh root weight was increased up to 66 percent in 4-year ginseng plants.

• Asian-Australasian Journal of Animal Sciences
• /
• 제10권5호
• /
• pp.471-477
• /
• 1997

A study detennined whether certain biochemical and physiological variables were altered during marginal Zn deficiency. Ten weaned crossbred Hereford Angus heifer calves, weighing $163{\pm}2kg$, were utilized. Five calves were fed a Zn - deficient (- Zn) brome-alfalfa hay diet containing 17 mg Zn/kg diet DM, and five calves were fed a Zn-adequate (+Zn) diet with 23 mg Zn/kg diet DM from $ZnSO_4$ added to the - Zn diet (total diet, 40 mg Zn/kg diet DM), for 32 d. At 21 d the - Zn calves had a reduction (p < .05) in feed efficiency. By 25 d, plasma Zn and alkaline phosphatase concentrations were reduced (p < .05) in the - Zn calves. Blood urea nitrogen, glucose, insulin, IGF-I, Cu plasma concentration and Zn and Cu concentrations of red blood cell (RBC) and liver were not altered (p > .05) by the - Zn diet through 25 d. In response to a single i. m. injection of dexamethasone (20 mg) on d 25, calves fed the two dietary Zn amounts showed no changes (p > .05) in plasma or RBC Zn and Cu concentrations, serum IGF-I, insulin, and glucose when measured at 6, 12, 24, 48, 72, and 96 h after injection. In response to an intradermal injection of phytohemagglutinin on d 30, cell mediated immune (CMI) response was reduced (p < .05) in the - Zn calves. These observations indicate that during a marginal Zn deficiency in calves, there was a decrease in feed efficiency, plasma Zn, serum alkaline phosphatase, and CMI response.