• 제목/요약/키워드: manufacturing uncertainty

검색결과 192건 처리시간 0.026초

MEMS 가속도계의 성능분포 및 제조수율 예측 (Prediction of the Performance Distributions and Manufacturing Yields of a MEMS Accelerometer)

  • 김용일;유홍희
    • 대한기계학회논문집A
    • /
    • 제35권7호
    • /
    • pp.791-798
    • /
    • 2011
  • 모든 기계 시스템의 변수는 불확실성을 가지고 이는 시스템 성능에 직접적인 영향을 미칠 뿐 아니라 생산성 감소를 야기한다. 특히 MEMS 시스템의 크기는 매우 작으므로 일반적인 기계 시스템에 비해 제조 공차는 상대적으로 커질 수 밖에 없다. 이 제조 공차에 의한 시스템 변수 불확실성은 MEMS 시스템의 성능과 제조 수율에 영향을 미친다. 본 연구에서는 두 가지의 불확실성 해석법을 이용하여 MEMS 가속도계의 시스템 변수 불확실성에 의한 성능의 불확실성 해석을 수행하고 성능분포 및 제조수율을 예측하였다.

글로벌 정치 경제적 불확실성에 따른 제조 기업의 R&D 전략 분석 (Analysis of the Manufacturing Firms' R&D Strategy According to Global Political and Economic Uncertainty)

  • 오건택;정의범
    • 한국산업정보학회논문지
    • /
    • 제29권2호
    • /
    • pp.191-204
    • /
    • 2024
  • 본 연구는 글로벌 정치 경제적 불확실성 따라 제조 기업의 R&D 투자가 매출액에 미치는 영향을 분석하였다. 본 연구의 변수로는 기업의 R&D 투자, 기업의 성과 지표인 매출액, 글로벌 정치 경제적 불확실성을 반영한 Global Economic Policy Uncertainty (GEPU) 수치가 사용되었다. 패널데이터 분석에 있어서 Wharton Research Data Services의 Compustat Database에 있는 제조 기업을 바탕으로 2000년부터 2023년까지 24년간 총 96분기 데이터를 사용하였다. 선행 연구에서 상대적으로 부족했던 Global Economic Policy Uncertainty 수치를 조절변수로 사용하여 기업의 R&D 투자가 매출액에 미치는 영향에 연구하였으며, 시간 지연 효과(Time lag effect)에 대해 분석함으로써 새로운 연구의 방향을 제시하였고, 기업의 효과적인 R&D 투자 전략을 실행해야 함을 시사하였다.

가공 기계부품 고유진동수 해석과 측정에 관한 연구 (A Study on the Uncertainty of Estimation in Vibration Test for the Machine Parts)

  • 황재덕;김재실;조성진
    • 한국기계가공학회지
    • /
    • 제13권1호
    • /
    • pp.16-22
    • /
    • 2014
  • Resonance refers to the magnification of a structural response which occurs when a linear lightly damped system is driven with a sinusoidal input at its natural frequency. An exploratory vibration test (a natural frequency measurement test) is very important for the vibration testing of machine parts, as the value measured in an actual laboratory affects test results. For this reason, it is necessary to estimate the measurement uncertainty to verify the reliability of this type of test. In this study, measurement uncertainty is estimated based on three uncertainty factors. The uncertain factors are the measured points in the machine parts, the resolution of the vibration equipment, and uncertainty of the calibration certificate.

고정밀 공작기계 이송장치의 정밀도 측정방법 및 불확도 요인에 관한 연구 (A Study on the Measurement Method and Uncertainty Factors for Precision Inspection to Feed Unit of High Precision Machine Tool)

  • 김상화;김병하;최우각
    • 한국기계가공학회지
    • /
    • 제11권4호
    • /
    • pp.55-61
    • /
    • 2012
  • Very important content in performance evaluation of machine tool is positioning accuracy and repeatability precision measurements of feed mechanism. A study analyses the measurement method and uncertainty factors by ISO-based test method. Reliable results can't be derived without the notion of measurement uncertainty. The reason is that the measured value includes a lot of uncertain factors. Finding the factor that affects the measurement of parameter is important for estimation of measurement precision. In this paper, the evaluation of uncertainty analysis about positioning accuracy and repeatability precision measurements of high precision feed mechanism is presented to evaluate the important factors of uncertainty.

Uncertainty and Manufacturing Stock Market in Korea

  • Jeon, Ji-Hong
    • 산경연구논집
    • /
    • 제10권1호
    • /
    • pp.29-37
    • /
    • 2019
  • Purpose - We study the dynamic linkages of the economic policy uncertainty (EPU) in the US on the manufacturing stock market returns in Korea. In detail, we examine the casual link between EPU index in the US and the manufacturing stock indexes in Korea. Research design, data, and methodology - We measure mainly the distribution effect of the US EPU on the manufacturing stock market in Korea of 1990-2017 by the vector error correction model (VECM). Result - In result, we estimate the impact of the US EPU index has significantly a negative response to the manufacturing stock market in Korea such as non-metal stock index, chemical stock index, food stock index, textile·clothes stock index, automobile·shipbuilding stock index, machinery stock index, steel·metal stock index. Also the remaining variables such as electric·electronics stock index, S&P 500, and producer price index in Korea have a negative relationship with US EPU index. Conclusions - We find out that the relationship between EPU index of the US and the manufacturing stock market in Korea has the negative relationships. We determine the EPU of the US has the spillover effect on the industry stock markets in Korea.

Factors Influencing Environmental Disclosure: A Case Study of Manufacturing Companies in Indonesia

  • FUADAH, Luk Luk;SAFTIANA, Yulia;KALSUM, Umi;ARISMAN, Anton
    • The Journal of Asian Finance, Economics and Business
    • /
    • 제8권9호
    • /
    • pp.23-33
    • /
    • 2021
  • The main objective of this research is to examine the effect of organizational culture, environmental uncertainty, and manager's personnel value on environmental disclosure through the environmental organizational structure of manufacturing companies on the Indonesia Stock Exchange. This research uses the structuration and contingency theory. The sample in this study focused on the level of heads or managers or directors of manufacturing companies listed on the Indonesia Stock Exchange. The research data was obtained through an online questionnaire distributed to heads or managers. The total sample of this study is 161 manufacturing companies. The data comprising of 64 respondents was completed and can be processed. Empirical testing used Structural Equation Modeling (SEM) through Partial Least Square (PLS). The result shows that environmental uncertainty and management personnel value have a positive effect on the environmental organizational structure, as well as the environmental organizational structure has a positive effect on the environmental disclosure. However, organizational culture has no effect on the environmental organizational structure. This research can provide benefits for manufacturing companies. The limitation include the low level of response from the respondents. Also the results cannot be generalized due to its specific focus on the manufacturing companies.

고정밀 공작기계의 열적효과 측정 및 불확도 추정에 관한 연구 (A Study on the Thermal Effects Measurement and Uncertainty Estimation for High Precision Machine Tools)

  • 손덕수;김상화;박일환
    • 한국기계가공학회지
    • /
    • 제12권2호
    • /
    • pp.107-113
    • /
    • 2013
  • When the main spindle of high precision machine tools are run many hours, heat is generated in bearing parts of the inside of the spindle. Also, headstock is appeared distortion by inside and outside temperature difference of a machine. This paper studies method to measure behavior of machine tool about these thermal effects. In addition, it estimates measurement uncertainty factors which can be appeared in thermal effects measurement. Finding the factor of thermal affect measurement is important for estimation of measurement uncertainty. This paper measures thermal effects of high precision machine tools and evaluates the important factors of uncertainty.

대면적/고정밀 3차원 표면형상의 5자유도 정합법 개발 및 평가 (Development and Evaluation of Stitching Algorithm With five Degrees of Freedom for Three-dimensional High-precision Texture of Large Surface)

  • 이동혁;안정화;조남규
    • 한국생산제조학회지
    • /
    • 제23권2호
    • /
    • pp.118-126
    • /
    • 2014
  • In this paper, a new method is proposed for the five-degree-of-freedom precision alignment and stitching of three-dimensional surface-profile data sets. The control parameters for correcting thealignment error are calculated from the surface profile data for overlapped areas among the adjacent measuring areas by using the "least squares method" and "maximum lag position of cross correlation function." To ensure the alignment and stitching reliability, the relationships betweenthe alignment uncertainty, overlapped area, and signal-to-noise level of the measured profile data are investigated. Based on the results of this uncertainty analysis, an appropriate size is proposed for the overlapped area according to the specimen's surface texture and noise level.

동력식 조립공구의 측정불확도 산출방법 개발 (Calibration Methods for Measurement Uncertainty of Power Assembly Tools)

  • 오세헌;강기영;홍민성
    • 한국생산제조학회지
    • /
    • 제24권5호
    • /
    • pp.496-501
    • /
    • 2015
  • In this study, calibration procedure of power assembly tools is suggested and methods are developed for calculating measurement uncertainty. Fist of all, the calibration of joint simulator bench (JSB) was carried out for maintaining traceability and the uncertainty components of JSB were analyzed. The influences of tool speed, tolerance, temperature and length of the adapter were examined by the torque measurement values through experiments. From this research, credibility for calibration results could be enhanced. This experimental results, being used as an effective tool for calibration of power assembly tools, will provide and improve the accuracy of the use of the power assembly tools.

Measurement uncertainty evaluation in FaroArm-machine using the bootstrap method

  • Horinov, Sherzod;Shaymardanov, Khurshid;Tadjiyev, Zafar
    • Journal of Multimedia Information System
    • /
    • 제2권3호
    • /
    • pp.255-262
    • /
    • 2015
  • The modern manufacturing systems and technologies produce products that are more accurate day by day. This can be reached mainly by improvement the manufacturing process with at the same time restricting more and more the quality specifications and reducing the uncertainty in part. The main objective an industry becomes to lower the part's variability, since the less variability - the better is product. One of the part of this task is measuring the object's uncertainty. The main purpose of this study is to understand the application of bootstrap method for uncertainty evaluation. Bootstrap method is a collection of sample re-use techniques designed to estimate standard errors and confidence intervals. In the case study a surface of an automobile engine block - (Top view side) is measured by Coordinate Measuring Machine (CMM) and analyzed for uncertainty using Geometric Least Squares in complex with bootstrap method. The designed experiment is composed by three similar measurements (the same features in unique reference system), but with different points (5, 10, 20) concentration at each level. Then each cloud of points was independently analyzed by means of non-linear Least Squares, after estimated results have been reported. A MatLAB software tool used to generate new samples using bootstrap function. The results of the designed experiment are summarized and show that the bootstrap method provides the possibility to evaluate the uncertainty without repeating the Coordinate Measuring Machine (CMM) measurements many times, i.e. potentially can reduce the measuring time.