• 제목/요약/키워드: manufacturing system operation

검색결과 801건 처리시간 0.031초

한국 차량공유사업의 성공요인 사례분석 (The Case Study on the Success Factors of Korean Car Sharing Business)

  • 김지예;한인구
    • 지식경영연구
    • /
    • 제21권3호
    • /
    • pp.1-25
    • /
    • 2020
  • 본 연구에서는 한국의 카셰어링 기업(쏘카, 그린카)의 핵심성공요인을 분석하고, 한국의 특수한 경제, 규제 환경 속에서 형성된 공유경제 서비스의 성장과 관련하여 자동차 제조사의 대응전략을 분석하였다. 본 연구의 결과는 다음과 같다. 쏘카와 그린카 모두 창업기에는 '적시의 시장 진입', 초기 성장기에는 '외부자원의 활용'이 핵심성공요인으로 파악되었다. 고도성장기의 핵심성공요인은 두 회사의 사업방향의 차이에 따라 각기 다르게 나타났다. 독립 벤처기업으로 B2C 사업으로 외형성장에 집중한 쏘카는 '고객밀착형 마케팅'과 '충분한 자본조달'이, 대기업 계열사로 편입되어 내부 자원활용에 집중한 그린카는 '진입전략(B2B시장 확대)'이 핵심성공요인으로 파악되었다. 고도성장기의 공통적 핵심성공요인으로 '외부자원의 활용'과 '대기업과의 공생'으로 분석되었다. 본 연구에서 분석한 현대자동차그룹의 카셰어링 대응 전략은 크게 협력, 투자 그리고 직접운영(딜카)의 형태로 나타났다. 대응전략의 목적은 단기적으로는 카셰어링 서비스 업체와의 협업을 통한 테스트베드 운영 등으로 나타났고, 중/장기적인 관점에서는 이용자 데이터 수집, 이를 통한 신규 모빌리티 서비스 기획 등과 함께 미래의 자율주행 모빌리티 서비스 시장 선점이 중요한 목적으로 파악되었다.

파랑 후측 모의 실험 기반 강릉항 폭풍파랑 분석 (Characteristics of Storm Waves at Gangneung port Based on the Wave Hindcasting)

  • 안경모;황순미;천후섭
    • 한국해안·해양공학회논문집
    • /
    • 제28권6호
    • /
    • pp.375-382
    • /
    • 2016
  • 본 연구에서는 동해 전역에 대해서 파랑 후측 모의 실험을 실시하고, 이 결과를 바탕으로 너울성 파랑에 의해 큰 피해가 발생한 바 있는 강릉항 지역에서의 폭풍파랑 특성을 조사하였다. 이를 위해 먼저 본 연구의 파랑 후측 모의 실험 결과를 강릉항, 일본 Niigata, Hamada 등의 지점에서의 파랑관측 결과와 비교하였다. 이에 따르면, 본 연구의 파랑 계산 결과는 비교적 잘 일치하였는데, 강릉항의 경우, 유의파고 및 첨두주기의 Pearson 상관 계수는 각각 0.92, 0.72에 달하는 것으로 나타났다. 이 후 강릉항 파랑 계산 결과에 대해 극치 분석을 실시하였는데, 본 연구에서는 POT 기법을 적용하고, 추출된 폭풍파랑을 GPD(Generalized Pareto) 함수에 적용하여 파랑 계산 결과 얻은 폭풍파랑의 재현주기를 산정하였다. 본 연구의 분석에 따르면, 2008년 2월 24일 발생한 폭풍 파랑의 재현 주기는 8.2 개월로 1년이 되지 않는 것으로 파악되었다. 그리고 재현주기가 1개월 이상되는 폭풍파랑에 대해 회귀분석을 실시해 유의파고 및 유의파 주기의 관계식을 구하였는데, $T_{1/3}=7H_s^{0.25}$인 것으로 파악되었다.

슬롯코팅에서 정상 및 비정상상태 컴퓨터해석을 통한 코팅의 균일성 분석 (Analysis of Coating Uniformity through Unsteady and Steady State Computer Simulation in Slot Coating)

  • 우정우;성달제;류민영
    • 폴리머
    • /
    • 제38권5호
    • /
    • pp.640-644
    • /
    • 2014
  • 평판 디스플레이 제조공정 중의 하나인 유리기판 위에 감광액을 도포하는 과정에 슬롯코팅 방법이 많이 쓰이고 있다. 도포공정에서는 균일한 코팅 두께를 얻는 것이 중요하며, 코팅의 균일성은 노즐방향과 운전방향의 균일성으로 나뉜다. 운전방향의 코팅 균일성은 코터의 운전조건에 영향을 받고, 노즐방향의 균일성은 다이 내부의 흐름의 균일성에 영향을 받게 된다. 이러한 영향 인자들로 인해 코팅두께가 불균일한 현상이 발생하는데, 코터 진행의 초기 구간에는 비정상상태 구간으로 운전방향과 노즐방향으로 코팅두께가 균일하지 않다. 본 연구에서는 이러한 현상이 나타나는 원인을 파악하기 위해 비정상상태와 정상상태를 구별하여 해석하고 이를 실험과 비교하였다. 그 결과 감광액이 다이 내부에서 균일한 압력분포에 도달하기까지 시간이 필요하고 이로 인해 코팅 초기구간에서 다이의 양가장자리 영역의 속도가 중앙 영역에 비해 속도가 낮게 나타났으며 코팅 두께도 얇게 나타났다. 그러나 정상상태에 도달한 후에는 가장자리 영역의 속도가 중앙 영역보다 높게 나타났고 코팅 두께 역시 두껍게 나타났다.

Kroll법에 의한 타이타늄의 제조기술 (Production Technology of Titanium by Kroll Process)

  • 손호상
    • 자원리싸이클링
    • /
    • 제29권4호
    • /
    • pp.3-14
    • /
    • 2020
  • 현재 타이타늄 스펀지는 Kroll법에 의해 만들어지고 있다. 타이타늄의 새로운 제련법과 리사이클링 기술의 중요성을 이해하기 위해서는 기존의 타이타늄 제조기술에 대한 검토가 필요하므로 본 논문에서는 기존의 Kroll법을 중심으로 한 타이타늄 제조기술에 대해 고찰하였다. Kroll법은 아래와 같이 크게 네 가지 공정으로 구분할 수 있다. (1) 유동 염화법이나 용융염 염화법에 의한 TiO2의 염화 공정 (2) 반응기 결합방법에 따른 역U자형이나 I자형을 이용한 TiCl4의 Mg에 의한 환원과 Mg와 MgCl2의 증류 (3) 단극형이나 복극형 전해조에 의한 반응 부산물인 MgCl2의 전해와 Mg과 Cl2의 생성 (4) 스펀지 타이타늄의 분쇄와 VAR이나 EBM에 의한 용해 및 잉곳 제조 지난 80년 동안 제련공정이 많이 개선되었지만, Kroll법은 TiCl4의 환원과 MgCl2의 분리를 위한 비용이 많이 들고 시간이 많이 걸리는 회분식 조업이라는 문제점을 가지고 있다.

고감도 보급형 방사선 측정센서 모듈 개발 (Development of High-Sensitivity and Entry-Level Radiation Measuring Sensor Module)

  • 오승진;이주현;이승호
    • 전기전자학회논문지
    • /
    • 제26권3호
    • /
    • pp.510-514
    • /
    • 2022
  • 본 논문에서는 고감도 보급형 방사선 측정센서 모듈 개발을 제안한다. 제안하는 측정센서 모듈은 섬광체+광증배소자(SiPM) 센서 최적화 구조설계, 센서 드라이버용 증폭과 필터 및 제어회로 설계, 근거리 통신을 포함한 제어회로 설계, 센서 기구설계 및 제작, 시제품에 적용되는 GUI 개발 등으로 구성된다. 섬광체+광증배소자(SiPM) 센서 최적화 구조 설계는 센서 구조 설계를 위한 섬광체와 광증배소자(SiPM)의 특성을 확인하여 설계한다. 센서 드라이버용 증폭과 필터 및 제어회로 설계는 SiPM을 이용하여 섬광체로 방사선에 의해 발생하는 미세 섬광신호를 처리하도록 설계한다. 근거리 통신을 포함한 제어회로 설계는 근거리 무선통신 기능을 지원하기 위한 MCU 설계 및 유선 통신 지원을 통해 데이터 전송이 가능하도록 설계를 수행한다. 센서 기구설계 및 제작은 플라스틱 섬광체에서 발생한 미세 섬광 신호를 광증배소자(SiPM)에 전달하기 위해 플라스틱 섬광체 외부에 반사지(미러링)를 감싸 발생한 섬광이 반사되어 효율을 높이도록 설계한다. 시제품에 적용되는 GUI 개발은 각 화면에 따라 상단에 날짜와 시간을 표현하며, 측정단위 및 시간, 초, 알람 레벨, 통신상태, 배터리 용량 등이 표현되도록 한다. 제안된 시스템의 성능을 평가하기 위하여 공인시험기관에서 실험한 결과는 방사선량 측정 범위가 30𝜇Sv/h ~ 10mSv/h로 측정되어서, 현재 국내외에서 상용으로 판매되는 제품들 중에서 최고수준 범위와 같은 결과가 산출되었다. 또한, ±7.4%의 측정 불확도가 측정되어서 국제 표준인 ±15% 이하에서 정상동작 됨이 확인되었다

한국 제조기업의 기술혁신, 고용, 기업성과 간 관계에 대한 3SLS 분석: 고용의 양적·질적 특성 관점에서 (3SLS Analysis of Technology Innovation, Employment, and Corporate Performance of South Korean Manufacturing Firms: A Quantity and Quality of Employment Perspective)

  • 임동근;정진화
    • 기술혁신연구
    • /
    • 제31권3호
    • /
    • pp.139-169
    • /
    • 2023
  • 본 연구는 기업의 기술혁신이 고용과 기업성과에 미치는 영향을 변수 간 양방향 인과관계를 고려하여 분석하였다. 기술혁신의 대리변수는 기업의 특허출원 수이며, 분석대상은 100인 이상 규모의 국내 제조업체이다. 실증분석의 경우 기술혁신(특허출원), 고용(근로자 수, 숙련 근로자 비중), 기업성과(근로자 1인당 매출액)가 종속변수인 연립방정식 모형을 3단계 최소자승추정법(3SLS)으로 추정하였다. 외생변수로 기업의 경영상 특성과 일반적 특성을 통제하였고, 각 방정식의 식별변수로 R&D집약도, 근로자 1인당 노동비용(또는 기업부설연구소 보유 여부), 교육훈련투자를 사용하였다. 분석자료는 인적자본기업패널(HCCP)의 1차년도(2005년)~7차년도(2017년) 자료이며, 이를 NICE신용평가정보(주)의 기업 재무자료 및 한국 특허청의 특허정보와 병합하여 사용하였다. 분석결과에 의하면, 기업의 특허출원이 활발할수록 근로자 수, 숙련 근로자 비중, 근로자 1인당 매출액이 모두 증가하였고, 반대 방향의 인과관계도 모두 유의하였다. 따라서 기업의 기술혁신은 고용의 확대 및 질적 제고뿐 아니라 기업의 지속적인 성장에도 기여하는 것으로 확인된다.

Progress of Composite Fabrication Technologies with the Use of Machinery

  • Choi, Byung-Keun;Kim, Yun-Hae;Ha, Jin-Cheol;Lee, Jin-Woo;Park, Jun-Mu;Park, Soo-Jeong;Moon, Kyung-Man;Chung, Won-Jee;Kim, Man-Soo
    • International Journal of Ocean System Engineering
    • /
    • 제2권3호
    • /
    • pp.185-194
    • /
    • 2012
  • A Macroscopic combination of two or more distinct materials is commonly referred to as a "Composite Material", having been designed mechanically and chemically superior in function and characteristic than its individual constituent materials. Composite materials are used not only for aerospace and military, but also heavily used in boat/ship building and general composite industries which we are seeing increasingly more. Regardless of the various applications for composite materials, the industry is still limited and requires better fabrication technology and methodology in order to expand and grow. An example of this is that the majority of fabrication facilities nearby still use an antiquated wet lay-up process where fabrication still requires manual hand labor in a 3D environment impeding productivity of composite product design advancement. As an expert in the advanced composites field, I have developed fabrication skills with the use of machinery based on my past composite experience. In autumn 2011, the Korea government confirmed to fund my project. It is the development of a composite sanding machine. I began development of this semi-robotic prototype beginning in 2009. It has possibilities of replacing or augmenting the exhaustive and difficult jobs performed by human hands, such as sanding, grinding, blasting, and polishing in most often, very awkward conditions, and is also will boost productivity, improve surface quality, cut abrasive costs, eliminate vibration injuries, and protect workers from exposure to dust and airborne contamination. Ease of control and operation of the equipment in or outside of the sanding room is a key benefit to end-users. It will prove to be much more economical than normal robotics and minimize errors that commonly occur in factories. The key components and their technologies are a 360 degree rotational shoulder and a wrist that is controlled under PLC controller and joystick manual mode. Development on both of the key modules is complete and are now operational. The Korean government fund boosted my development and I expect to complete full scale development no later than 3rd quarter 2012. Even with the advantages of composite materials, there is still the need to repair or to maintain composite products with a higher level of technology. I have learned many composite repair skills on composite airframe since many composite fabrication skills including repair, requires training for non aerospace applications. The wind energy market is now requiring much larger blades in order to generate more electrical energy for wind farms. One single blade is commonly 50 meters or longer now. When a wind blade becomes damaged from external forces, on-site repair is required on the columns even under strong wind and freezing temperature conditions. In order to correctly obtain polymerization, the repair must be performed on the damaged area within a very limited time. The use of pre-impregnated glass fabric and heating silicone pad and a hot bonder acting precise heating control are surely required.

실시간 헬스케어 모니터링의 독립 구동을 위한 접촉대전 발전과 전자기 발전 원리의 융합 (Stand-alone Real-time Healthcare Monitoring Driven by Integration of Both Triboelectric and Electro-magnetic Effects)

  • 조수민;정윤수;김현수;박민석;이동한;감동익;장순민;라윤상;차경제;김형우;서경덕;최동휘
    • Korean Chemical Engineering Research
    • /
    • 제60권1호
    • /
    • pp.86-92
    • /
    • 2022
  • 최근 COVID-19 팬데믹 등 다양한 이유로 인해 바이오 헬스케어 시장이 전세계적으로 활성화되고 있다. 그 중, 생체정보 측정 및 분석 기술은 앞으로의 기술적 혁신성과 사회경제적 파급효과를 불러일으킬 것으로 예측된다. 기존의 시스템은 생체 신호를 받아 신호 처리를 하는 과정에서 신호 송×수신부, 운영체제, 센서, 그리고 인터페이스를 구동하기 위한 대용량 배터리를 필수적으로 요구한다. 하지만, 배터리 용량의 한계가 인해 시×공간적인 기기 사용의 제한을 야기하며, 이는 사용자의 헬스케어 모니터링에 필요한 데이터의 단절에 대한 원인으로 작용할 수 있으므로 헬스케어 디바이스의 큰 걸림돌 중의 하나이다. 본 연구에서는 생체정보 측정 장치에 접촉대전 효과(Triboelectric effects)와 전자기유도 효과(Electro-magnetic effects)를 융합하여, 외부 전원을 요구하지 않는 독립 구동이 가능한 시스템을 구성하여 시×공간적으로 사용 제한이 없는 소형 생체정보 측정 모듈을 설계 및 검증했다. 특히, 다양한 헬스케어 모니터링 중 족압 계측을 통해 사용자의 보행 습관 등을 파악할 수 있는 무선 족압 계측 모니터링 시스템을 검증했다. 보행 시 발생하는 접촉×분리 움직임에서 접촉대전 효과를 이용한 효과적인 압력 센서와 압력에 따른 전기적 출력신호를 통해 족압 센서를 만들고, 축전기를 이용한 신호처리 회로를 통해 이의 동적 거동을 계측할 수 있다. 또한, 출력된 전기신호의 무선 송×수신용 전원으로 사용하기 위해 전자기 유도 효과를 이용하여 보행 시 생기는 생체역학적 에너지를 전기에너지로 수확했다. 따라서, 이번 연구는 사용자가 제한적인 배터리 용량 때문에 생기는 충전에 대한 불편함을 줄일 수 있고, 뿐만 아니라 데이터 단절에 대한 문제점을 극복할 수 있는 방법으로서 큰 잠재력을 보여줌을 시사한다.

삼국시대(三國時代) 병기체제(兵器體制)의 연구(硏究) (This Study of the Arms Used in the Three Kingdoms)

  • 김성태
    • 헤리티지:역사와 과학
    • /
    • 제34권
    • /
    • pp.20-58
    • /
    • 2001
  • In order to unravel the characteristics of arms used in the 'Three Kingdoms,' Kokuryo, Silla and Paikje. the classification and the developing procedures of the arms should be first discussed. At first, the basic arms of the soldiers of Three Kingdoms were iron swords, iron spearheads, and bows. During that period, swords attached a ring pommel were commonly used. But after 5A. D. a sword with a decoration pommel appeared. Infantry generally used iron spearheads. From the late 4A. D. the long spearheads were broadly used in cavalry battles. In the late 6A. D. infantry mainly used long spearheads, and this resulted in the foundation of long spearheads units. There were two kinds of bows: Short Bow whose arch is small and Long Bow whose arch is long. It is known that the Short Bow was widely used in Kokuryo and Paikje up to 5A. D. In the early era, infantry used Long Bow, yet it was vastly used after 6A. D. when a castle's strategical value was great and defending a castle was. significant. Above mentioned, as basic combat weapons, iron spearhead and bow were fundamental. In particular, the spearhead was the essential weapon to a soldier. Yet, arrow gun and hook-shape cutters were important weapons. Especially, after 6A.D., when a castle became strategically pivotal in military, the arrow gun became the important weapon. This resulted in the foundation of arrow gun units. Hook-shape cutters were used to snatch horsemen or to climb up to fall the castle. Yet, the cutter was not the Three Kingodoms' basic weapon. In addition, the three stages of arms development in the Three Kingdoms are formation stage, development stage, and settlement stage. The formation stage was the period when premitive military unit appeared in the Three Kingdoms. It ranged from 1B. C. to the mid 3A. D. At that time according to regions. there were two weapon systems operating: North area including Kokuryo and the northern part of Paikje and South area including Silla, Kaya and the southern part of Paikje. ln North area a sword with a ring attached at the end of the holder, iron spear with neck and mid-size flat holder and iron arrowhead with an extension to fix, were used. In this period, during a war calvary units were mostly used and their weapon systems seemed possibly to succeed in that of Kochosun. In the development stage, when LoLang's influence on surroundings became weak, Koguryo, Paikjae and Silla had directly contacted each other. In the late 3A.D. to the early 6A.D., Silla achieved a drastic improvement in weapon system. This was the period when Kokuryo played a leading role in arms race. Kokuryo's arms manufacturing techniques passed onto Silla, Kaya and Paikje. In combat strategy a joint operation between infantry and calvary prevailed even if their military tactics were different. In a calvary battle heavily armed horsemen played import roles at this period. The horsemen and even horses were heavily guarded with iron armors. After all, the appearance of fully armed horsemen implies the very need of powerful destructive forces in weapon system. At that time, basic weapons were a big sword with a ring attached at the end of the holder, swallow's tail-shape spear with neck, and iron spearhead with neck and an extension. The settlement stage began at the mid 6A.D., when it was the revolutionary period in the arms development history. Of course, actual proofs and picture documents were not sufficient enough to penetrate full scale of the weapon system. But, according to historical circumstances and historic records, it is very certain that this period was the peak in arms development. In this period special military units, such as infantry-calvary companies, Archery units and Long spear units, that executed particular duties with special weapons, were founded. This became the characteristics of the settlement stage.

환경 인쇄 기술의 발전과 인쇄물의 $CO_2$ 발생량에 관한 연구 (A Study about Development of Environment Printing Technology and $CO_2$)

  • 이문학
    • 한국인쇄학회지
    • /
    • 제30권3호
    • /
    • pp.89-114
    • /
    • 2012
  • For as to world, the concern about the environment problem is enhanced than any other time in the past because of being 21 century. And the environment problem is highlighted as the world-wide issue. The time of the environment problem intimidates the alive of the mankind and presence of an earth over the time. It becomes the essentiality not being selection in the personal living or the economical viewpoint now to prepare for the climatic modification. As to the company management, the green growth period which it excludes the environment management considering an environment, cannot carry on the company the continued management comes. That is, in the change center of the management paradigm, there is the environment management. Nearly, the greenhouse gas which the publication industry is the environmental toxic material like all industries is generated. The greenhouse gas is ejected in the process of running the manufacturing process and print shop of the various kinds material used as the raw material of the book. Particularly, the tree felling for getting the material of the paper is known to reach the direct influence on the global warming. This study does according to an object it considers and organizes the environment parameter based on this kind of fact as to the publication industry. And it is determined as the reference which is used as the basic materials preparing the case that carbon exhaust right transaction(CAP and TRADE) drawing are enforced in all industries and is sustainable the management of the publication industry and reduces the environmental risk among the company many risk management elements and plans and enforces the publication related policy that there is a value. In the printing publication industry, this study tried to inquire into elements discharging the environmental pollutant or the greenhouse gas. Additionally, in the printed publication production process, it tried to inquire into the effort for an environment-friendly and necessity at the printing paper and the printers ink, regarded as the element discharging the greenhouse gas all kinds of the printing materials, operation of the print shop and all kinds of the machines and recycle process, and etc. These considerations make these industrial field employees aware of the significance about a conservation and environmental protection. They try to give a help in the subsequent study producing quantitatively each environmental parameter emission of green house gas. This makes the calculation of the relative $CO_2$ output reproached ultimately possible. Meanwhile, in a sense, many research protects and improving an environment in connection with the contents of research at the printing publication industrial field is in progress. There will be the voluntary human face that it has to protect an environment but this can not do by the outside factor according to all kinds of environment related law and regulation. Anyway, because of acting on company management as the factor of oppression, the increase of this environment-related correspondence cost could know that the research that the environment loading relates with a procurement and development, environment management system introduction, quality control standard, including, normalizing including a material, and etc. through the part of the effort to reduce the cost low was actively in progress. As to the green growth era, as follows, this paper prescribed the subject and alternative of the print publication industry. It is surrounded by the firstly new digital environment and the generation of the subject. And secondly the printing industry is caused by the point of time when the green growth leaves by the topic which is largest in the global industry and it increases. The printing publication industry has to prepare the bridgehead for the environment-friendly green growth as the alternative for this resolution with first. The support blown in each industry becomes the obligation not being selection. Prestek in which the print publishing was exposed to spend many energies and which is known as the practice of the sustainable print publishing insisted that it mentioned importance of the green printing through the white pages in 2008 and a company had to be the green growth comprised through the environment-friendly activity. The core management for the sustainable printing publication industry presented from Presstack white pages is compacted to 4 words that it is a remove, reduce, recover, and recycle. Second, positively the digital printing(POD) system should be utilized. In the worldwide print out market, the digital printing area stops at the level of 10% or so but the change over and growth of the market of an analog-to-digital will increase rapidly in the future. As to the CEO Jeff Hayes of the Infoland, the offset print referred to that it of the traditional method got old and infirm with the minor phase of the new printing application like the customer to be wanted publication and the print of the digital method led the market. In conclusion, print publishers have to grasp well the market flow in the situation where a digitalization cannot be generalized and a support cannot avoid. And it keeps pace with the flow of the digital age and the recognition about the effort for the development and environment problem have to be raised. Particularly, the active green strategy is employed for the active green strategy.