• Korean Journal of Agricultural Science
• /
• v.35 no.2
• /
• pp.155-165
• /
• 2008

A seasoned squid Jeotkal, Korean traditional fermented seafood, and its ingredients for manufacturing, including red hot pepper powder, ground garlic, sesame seeds, were irradiated with 0, 0.5, 1, 2, and 5 kGy by electron beam and stored at $4^{\circ}C$ for 4 weeks to determine the changes in microbiological and sensory characteristics. The initial contamination of squid Jeotkal such as total aerobic bacteria, yeast & mold, and coliform bacteria were at the levels of 2.88, 3.04, and 4.20 log CFU/g, respectively. However, electron beam irradiation with does at 5 kGy reduced the total aerobic bacteria to about 1 log CFU/g. Yeast & mold and coliform bacteria were reduced to 1-2 log CFU/g after 2 kGy of irradiation and reached to undetected level when the sample was irradiated at 5 kGy and following storage at $4^{\circ}C$ for 4 weeks. Sensory characteristics showed that electron beam irradiation of up to 5 kGy did not adversely affect overall acceptability of squid Jeotkal and its ingredients during cold storage. Therefore, electron beam irradiation is one of the possible means to improve storage stability of seasoned squid jeotkal, which has limited alternative sterilization methods due to the temperature characteristics of the products.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.119-124
• /
• 2009

Statement of problem: The increasing demand for esthetic restorations has been required developing new materials for tooth colored restoration. Ceromer(Ceramic Optimized Polymer) has some advantages over porcelain, and has gained increasing popularity in restorative dentistry. However, there is little information on the dimensional changes in a clinical restoration in moist conditions. Purpose: This study examined the dimensional changes in Ceromer restorations with a clinical crown shape that were fabricated in a clinical manner. Material and methods: The crowns for the maxillary central incisor were fabricated with two Ceromers($BelleGlass^{(R)}$ and $Targis^{(R)}$) using a similar clinical restoration manufacturing technique. A total of twenty specimens were prepared and immersed in distilled water at room temperature to allow for water absorption. The weight, height and width were measured at 24, 72 and 168 hours. The accumulated ratios of the changes were calculated and evaluated using a paired t-test and an independent independent t-test. Results: The dimensions and weight increased with increasing soaking time. $Targis^{(R)}$ showed significant differences in height and weight between 24 hours and the other times(P<.05). $BelleGlass^{(R)}$ showed significant differences in width and weight between 24 hours and the other times. The two materials showed different changing patterns of the dimensions but there were no statistically significant differences between them. Conclusion: The dimensions and weight of the Ceromer restorations were changed by water absorption. The clinical crown shaped specimen showed more complicated dimensional changes than the simplified specimens.

• Weed & Turfgrass Science
• /
• v.5 no.1
• /
• pp.10-16
• /
• 2016

Proper actions such as discard, return or manufacturing should be taken to imported plants contaminated with quarantine weeds. Heat-treatment has been used as a processing method in many countries such as U.S., Australia, Canada as well as Korea. This study was carried to find appropriate heat-treatment methods for devitalizing dodder seeds mixed with plant seeds. Two species of dodder seeds and six imported seeds were treated for 1, 5, 10, 15, 30, 45 minutes or 1, 2, 4, 5, 6, 8 hours at the temperatures of $75^{\circ}C$, $80^{\circ}C$, $85^{\circ}C$, $90^{\circ}C$, $95^{\circ}C$, $100^{\circ}C$ and $120^{\circ}C$. According to the study, dodder seeds were devitalized at the conditions of $85^{\circ}C$ for 2 hours, $90^{\circ}C$ for 30 minutes, $95^{\circ}C$ and $100^{\circ}C$ for 15 minutes, $110^{\circ}C$ for 10 minutes and $120^{\circ}C$ for 5 minutes. Meanwhile, seed vigours of Cosmos bipinnatus and Callistephus chinensis had no difference when compared with untreated control at the heat-treatment conditions of $85^{\circ}C$ for 2 hours, $90^{\circ}C$ for 30 minutes.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.6
• /
• pp.101-111
• /
• 2015

The modular construction method has been getting more attention followed by global eco-friendly trend as the domestic construction industry has focused more on remodeling and extension work. The modular construction method is an industrialized construction system which is not likely as the existing construction method it manufactures more than 70% modules at the factory then assembling can be completed in a short amount of time on site. The modular construction method has various strengths; shortening of construction period by on-site work decrease, weight pressure reduction by usage of light steel frames and cost saving by repetitive manufacturing. However, it is currently not expanded due to the existing commercialized construction method. Therefore, this research is in order to help the related authorities make decisions to select the construction method and motivate expansion of modular construction method which can be utilized effectively in the extension works. The intention of this research is to stress differentiation from other construction methods in construction period, construction expenses, labor and forces by comparing and analyzing actual cases, to inform competitiveness of modular construction method by concrete effect analysis and to support adoption of the modular construction method into the domestic industry.

• Journal of Technologic Dentistry
• /
• v.34 no.3
• /
• pp.291-302
• /
• 2012

Purpose: It is to survey old men's utilization status of dental clinic and temporary-binding dentures and then to provide basic data to make a program for manufacturing old men's dentures and their teeth health education. Methods: Random selection was made on old men living in Daejeon and Chungnam, and a survey was conducted from April 15 to May 20, 2011. 500 questionnaires were distributed and 420 questionnaires were collected. Using spss 18.0 program, final analysis was made on 363 questionnaires except for 57 questionnaires which had missing value or showed some doubts about the unreliability. Results: 1. With respect to number of natural teeth as per the age, the upper/lower jaws had meaningful differences (P<.001), which means that the older the person is, the smaller number of natural teeth is. In the meantime, there was no meaningful difference according to sex. 2. With respect to kind of prosthetics installed in a mouth as per the age, there was meaningful difference in the upper jaws (P<.05) but there was no meaningful difference in the lower jaws. It was found out that the older the persons are, the more they use removable dentures while the younger the persons are, the more they use fixed partial dentures. 3. With respect to mouth health condition recognized by oneself, it showed bad (44.4%) and good (10.3%),which means recognition as bad is greater, and the age when prosthetics were first used is dispersed variously from below 40 to over 70. 4. Dental care institutions which they mainly used are hospital and clinics (91.5%), and 66.4% of them visited dental clinics lately. Preferential treatment if they go to dentists is as follows in the order of prosthetics (33.9%), gum treatment (24.2%) and pain treatment (14.9%). 5. 68.4% of them revisited dentists after installation of dentures and the reason for revisit is as follows in the order of poorly fitted dentures (35.1%), painful gum 25.9%, regular check-up 25.4% and difficult chewing 9.6%. Conclusion: As our country enters into an aging society, mouth health problem of old men has come to a serious issue, and therefore, a survey was conducted on some old men with respect to their utilization status of dental clinic and removable dentures in order to provide basic data for improvement of quality of their life, maintenance and enhancement of their mouth health. The study result shows that the older they are, the higher the loss rate of teeth as well as needs for prosthetics are, and thus it is thought the study will help to develop mouth health education program which may improve quality of old men's life by recovery of mouth functions declined due to loss of teeth and by regular check-up, education for mouth health control and following-up control of dentures.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.2
• /
• pp.250-263
• /
• 2006

Statement of problem: Ti-alloy has been used widely since it was produced in the United States in 1947 because it has high biocompatibility and anticorrosive characteristics. Purpose: The pure titanium, however, was used limitedly due to insufficient mechanical charateristics and difficult manufacturing process. Our previous study was focused on the development of a new titanium alloy. In the previous study we found that the Ti-Ta-Nb alloy had better mechanical characteristics and similar anticorrosive characteristics to Ti-6Al-4V Material and methods: In this study, the cytotoxicity of the Ti-Ta-Nb alloy was evaluated by MTT assay using MSCs(Mesenchaimal stem cells) and L929 cells(fibroblast cell line). The biocompatibility of the Ti-Ta-Nb alloy was performed by inserting the alloy into the femur of the rabbits and observing the radiological and histological changes surrounding the alloy implant. Results: 1. In the cytotoxicity test using MSCs, the 60% survival rate was observed in pure titanium, 84% in Ti-6Al-4V alloy and 95% in Ti-10Ta-10Nb alloy. 2. In the animal study, the serial follow-up of the radiographs showed no separation or migration revealing gradual bone ingrowth surrounding the implants. Similar radiographic results were obtained among three implant groups pure titanium, Ti-6Al-4V alloy and Ti-10Ta-10Nb alloy. 3. In the histologic examination of the bone block containing the implants. the bone ingrowth was prominent around the implants with the lapse of time. There was no signs of any tissue rejection, degeneration, or inflammation. Active bone ingrowth was observed around the implants. In the comparison of the three groups, the rate of bone ingrowth was better in the Ti-10Ta-10Nb alloy group than those in pure titanium group or Ti-6Al-4V alloy group. In conclusion, Ti-10Ta-10Nb alloy revealed better biocompatibility in survival rate of the cells and bone ingrowth around the implants. Therefore we believe a newly developed Ti-10Ta-10Nb alloy can replace currently used Ti-6Al-4V alloy to increase biocompatibility and to decrease side effects. Conclusion: In conclusion, Ti-10Ta-10Nb alloy revealed better biocompatibility in survival rate of the cells and bone ingrowth around the implants. Therefore we believe a newly developed Ti-10Ta-10Nb alloy can replace currently used Ti-6Al-4V alloy to increase biocompatibility and to decrease side effects.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.1
• /
• pp.20-28
• /
• 2006

Statement of problem: The titanium has advantages of a high biocompatibility, a corrosion resistence, low density, and cheep price, so it is focused as a substituted alloy But it is quite difficult to cast with the tranditional method due to the high melting point, reacivity with element at, elevated temperature. By using the CAD-CAM system for the crown construction, it is possible to reduce the errors while proceeding the wax-up, investing, and casting procedure Purpose: The purposes of this study were to measure the marginal adaptation of the casting titanium coping and machine-milled titanium coping according to the casting methods and the marginal configurations. Material and method: The marginal configurations were used chamfer shoulder, and beveled shoulder. The total 30 copings were used, and these are divided into 6 groups according to the manufacturing method and marginal configuration. The gap between margin of the model and the restoration was measured with 3-dimensional measuring microscope. Results: The following results were obtained; 1. casting gold coping demonstrated the best marginal seal, followed by casting titanium coping finally machine-milled titanium copings. 2. In casting titanium coping, chamfer demonstrated the best marginal seal, followed by shoulder and beveled shoulder. There was no significantly difference in shoulder and beveled shoulder. But all margin form has clinically acceptable 3. In machine-milled titanium copings, chamfer demonstrated the best marginal seal, followed by shoulder and beveled shoulder. Beveled shoulder show large and uneven marginal gap Conclusions: Above result revealed that marginal adaptation of the titanim coping is avail able in the clinical range, it can be used as an alternative metal and it is prefered especially in chamfer or shoulder margin during implant superstructure fabrication. But there should be more research on machine-milled titanium in order to use it in the clinics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1754-1759
• /
• 2008

To produce plastic parts that have fine pattern through conventional injection molding, a lot of difficulties follow. Therefore, rapid heating and cooling methods are good candidates for manufacturing injection-molded parts with micro/nano patterns. In this study, we adopted the E-Mold patent technology. The mold for E-Mold technology has a separate heated core with micro heaters. It is very important to optimize the lay-out of the heaters in heated core because it influences both control and distribution of mold temperature. We developed a optimization method of heating line lay-out by using commercial softwares and compared the output with the experimental results. We used Pro-Engineer Wildfire 2.0 for the mold design, ICEMCFD for mesh generation, and FLUENT for heat transfer simulation. The simulation results showed the temperature profile from $60^{\circ}C$ to $120^{\circ}C$ or $180^{\circ}C$ during heating and cooling process which were compared with the injection molding experiments. We concluded that the simulation could well explain the experimental results. It was shown that the E-Mold optimization design for heater lay-out could be available through the simulation.

• Journal of the Korean association of regional geographers
• /
• v.3 no.1
• /
• pp.35-50
• /
• 1997

The purpose of this research seeks to analyze the spatial variations in the sex age structure which have been shown to exist within the study atrea, the Kyonggi province in Korea. In this study it is desired to use the Age Structure Index developed by Coulson in order to describe thi sex age structure of each of 186 tracts that comprise the tracted portion of the Kyonggi province. The mechanics of computing the Age Structure Index are found in the equation describing a linear least squares trend line: y=a+bx. For each census tract, the percentage of the population in each age group(y) was plotted against the middle age of each age group(x). The a is a constant representing the value of y, when x equals zero. The b is the regression coefficient and is a measure of the angle of the slope of the least squares trend line. Thus the value of b is the Age Structure Index for each census tract. The major results of this investigation can be summarized as follows: The spatial distributions of sex age structures in the Kyonggi province are far from random. They have exhibited great regularity with the yonger sex age structures near Seoul and a sharp decline to the older sex age structures out in all derections towards rural region. The results of this investigation should have important general significance for the study of the Kyonggi province Age Structure Index is a flexible, operational definition shich allows sex age structure to be measured, mapped, and incorporated in a wide variety of methods of statistical analysis. Futurer, it has been demonstrated that sex age structure varies spatially within Seoul metropolitan finge and that this variation is relagfed to many other attributes of the population. Especially, Age Structure Index is strongly related to the variables-rate of population growth rate. density, rate of numbers of manufacturing, land price. At the same time, considerably more research is needed before a genmeral body of knowlege concerning sex age structure can be developed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5622-5632
• /
• 2011

This paper presents the simulation design and analysis of Integrated Logistics System(ILS) which is operated by using the AGV(Automated Guided Vehicle). To maximize the operation performances of ILS with AGV, many parameters should be considered such as the number, velocity, and dispatching rule of AGV, part types, scheduling, and buffer sizes. We established the design of experiment in a way of Orthogonal Array in order to consider (1)maximizing the throughput; (2)maximizing the vehicle utilization; (3)minimizing the congestion; and (4)maximizing the Automated Storage and Retrieval System(AS/RS) utilization among various critical factors. Furthermore, we performed the optimization by using the simulation-based analysis and Evolution Strategy(ES). As a result, Orthogonal Array which is conducted far fewer than ES significantly saved not only the time but the same outcome when compared after validation test on the result from the two methods. Therefore, this approach ensures the confidence and provides better process for quick analysis by specifying exact experiment outcome even though it provides small number of experiment.