• Journal of the Korea Society of Computer and Information
• /
• v.3 no.3
• /
• pp.139-150
• /
• 1998

Due to development of science and telecommunication with wide-spread computer supply, it could be done through computer automatically instead of manpower-work for paper transportation & paper approval. It is developed to so-called Factory Automation. Further, it is developed to Office Automation. Trading companies & concerned trade authorities are interested in Trade Automation that such technique is applied to trade work. Generally, Trade Automation means to realize paperless trade by exchanging electronic papers through inter-computers after concerned trade operators transformed various papers to electronic papers that computer could read. In case Trade Automation fix in the trade business, it is expected one of innovations among traditional paper work of trade business, namely without going import-export authorities, Customs office, Banks. Shipping companies, Marine insurance companies on hand-carrying papers, it could be fast, simple, correct to finish every trade procedures such as commercial business, foreign currency, customs clearance, transportations, insurance. terms of payment, etc., with Electronic Data Interchange through computer facilities. Especially, telecommunication for trade form could be helpful to proceed trade paper with one-run-method Further we can anticipate 6 effects for Trade Automation as belows : First, as explained just above articles, with completion for Trade Automation, every trade procedures can be done by computer. so, time to work can be diminished. namely. logistics cost including accessory costs for trade procedures can be saved much. Second, viewing to private enterprise, effect of Office Automation can be maximized and rapid, correct exchange for various trade informations could raise efficiency of enterprise management establishing rational production, storage, transportation and could raise competition improving standard for consumers's service. Third, establishing Trade Automation systems makes it easier piling-up of harbor cargo by pre-transmission of electronic paper & trade informations make it possible to finish customs clearance in advance and can be dispatched upon cargo arrival. Fourth, most of concerned trade authorities such as import-export approval office. financial authorities, transport & insurance companies concentrated in Metropolitan area(Seoul, In -Cheon, Kyung-Ki). Therefore, in case Trade Automation could be realized. it is possible to proceed trade business instantly in every country area by computer facilities. Also. it contribute well-balanced development for suburb. region area by suburb dispersion of trading companies. Fifth, on the way to Trade Automation establishment & its enlargement process. producing enormous demand for over-all telecommunication such as hardware. software. network makes opportunity to progress telecommunication industry & concerned industries. Finally. Trade Automation accelerate change of employment structure leading unnecessary labors on the industries of office & logistics to manufacturing area.

• Journal of the Korean Geographical Society
• /
• v.28 no.3
• /
• pp.227-246
• /
• 1993

Gender differences in the seperation of emplo-yment from home and commuting patterns of the Seoul Area are examined in this paper. Throughout the analysis, it is found that there exist a substantial gender variation in comm-uting rates. Even though the regional variation of commuting rates of male workers is very small, the female workers' regional variation of commuting rates is substantial. Especially, the area around the traditional central place of Kangbuk, the area near the Youngdungpo and Kuro where manufacturing and retailing activities are concentrated, and the area where low-income families are concentrated show high rate of female commuting. In contrast, the traditional residential area, especially the high-income area of Kangnam, shows lower rate of female commuting. Generally, female workers tend to work closer to home than male workers. Accordingly, the job search range of female workers is smaller than that of mle workers. But the areal unit of job search range of female workers is wider at least than Dong. The fact that female workers' job search area is smaller than male workers' implies that the job opportunity around the home location could have more impacts on female workers' job search process than male workers' job search process. There is a substantial difference in commuting behavior between male and female workers. In general, male workers commute longer, use more expensive transportation mode, and pay higher transportation cost in comparision with female workers. These gender differences in commuting behavior could be resulted not only form the gender difference in the seperation of employment form work, but also form the gender difference in the social status in both work place and home.

• Journal of the Korean Geographical Society
• /
• v.50 no.3
• /
• pp.355-373
• /
• 2015

In this study the factors of fire damage are analyzed through previous research reviews. Local environmental factors as well as those factors attributed to fire damage (number of fire events, number of injured, number of death, economic loss) were selected to compose mutual relationship model. In order to verify this relationship model, official statistics concerning fire damage were collected from 228 local governments and compared with results from previous research. As a result of this comparison four dependent variables and 22 independent variables that affect fire damage were analyzed. Independent variables are divided into human vulnerability factors, physical vulnerability factors, economic vulnerability factors, mitigating factors and local characteristics. To analyze a relationship between selected dependent variables and independent variables, we applied a semi-logarithm model and performed regression analysis. Among the 22 independent variables, the number of the weak to disaster, social welfare service workers, workers in manufacturing industry, and the number of workers in restaurants and bars per 10,000 people show the significant correlation with the number of fire incidence. The number of death from fire is significantly related to two variables which are the number of social welfare service workers per 10,000 and the ratio of commercial area. Damage cost is significantly dependent on the property taxes per 10,000 people. These factors were included in the research model as vulnerability factors (human, physical, economic) and mitigating factors and local characteristics, and the validity of research model was verified. The result could contribute to fire-fighting resource allocation in Korea or they can be utilized in establishing fire prevention policy, which will enhance the national level of fire safety.

• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.316-329
• /
• 2008

Recently the increased attention pays on the processing of multiple, relatively low quantity, high value-added products resulted in adoption of batch process in the chemical process industry such as pharmaceuticals, polymers, bio-chemicals and foods. As there are more possibilities of the improvement of operations in batch process than continuous processes, a lot of effort has been made to enhance the productivity and operability of batch processes. But the chemical process industry faces a range of uncertainties factors such as demands for products, prices of product, lead time for the supply of raw materials and in the production, and the distribution of product. And global competition has made it imperative for the process industries to manage their supply chains optimally. Supply chain management aims to integrate plants with their supplier and customers so that they can be managed as a single entity and coordinate all input/output flows (of materials, information) so that products are produced and distributed in the right quantities, to the right locations, and at the right time.The objective of this study is to solve the purchase, distribution, production planning and scheduling problem, which minimizes the total costs of production, inventory, and transportation under uncertainty. And development of SCM model in chemical industry including batch mode operations. Through that, the enterprise can respond to uncertainty. Also integrated process optimal planning and scheduling model for manufacturing supply chain. The result shows that, the advantage of supply chain integration are quality matters seen by customers and suppliers, order schedules, flexibility, cost reduction, and increase in sales and profits. Also, an integration of supply chain (production and distribution system) generates significant savings by trading off the costs associated with the whole, rather than minimizing supply chain costs separately.

• Korean Chemical Engineering Research
• /
• v.47 no.2
• /
• pp.150-156
• /
• 2009

Plasma Display Panels(PDPs) require to have improved luminous efficiency, low manufacturing cost, and high image quality to compete with other flat display devices such as Liquid Crystal Displays(LCDs) and organic light-emitting diodes(OLEDs). In addition, the diversity of product line-up may be needed for high market share. In this paper, the optical characteristics of typical green phosphor for PDP application are reviewed and the problem-based solution will be proposed. We also shortly describe the principle of 3D-PDPs which are promising. Then, the requirement of green phosphor for 3D-PDP application is summarized and research achievement, as of now, is described. The typical problems of $Zn_2SiO_4:Mn$ phosphor, which is the most well-known, are the negatively charged surface property and the long decay time, which leads to unstable discharge in green cell and afterimage. These problems were solved by coating the phosphor surface with metallic oxide. It was found that $Al_2O_3$ would be the best material for $Zn_2SiO_4:Mn$ phosphor. It gives longevity as well as low operating voltage due to the charging effect in green cells. Also, new phosphors, $(Y,\;Gd)Al_3(BO_3)_4:Tb$ and $(Mg,\;Zn)Al_2O_4:Mn$ phosphor are proposed for increasing the luminance and reducing the decay time, which are capable to apply for 3D-PDP application.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.4
• /
• pp.342-348
• /
• 2009

Zn/Air secondary batteries are high energy density type and environment-friendly. Also, they have safer properties than batteries of other type by low manufacturing cost and using the electrolyte solution. But, they have a weak concerning large output discharge. Oxygen evolution reaction(OER) and oxgen reduction reaction(ORR) in aqueous solution make a result of a decrease of cell efficiency and life span. Therefore, to minimize the voltage drop from between OCV and charge/discharge voltage is key point. The problem should be solved through developing catalysts of high efficiency. In this study, we synthesized $Pr_{1-x}(Sr,\;Ca)_x\;CoO_3$ powders by citric method and then measured physical characteristics of each powder by XRD, SEM, TGA etc. We examined its electrochemical properties by the cathodic polarization, anodic polarization and cyclic voltammogram. We achieved results that new catalysts showed better performances than existing $La_{1-x}Sr_xCoO_3$, $La_{1-x}Ca_xCoO_3$, ect. catalysts prepared in our lab.

• International Commerce and Information Review
• /
• v.16 no.5
• /
• pp.151-178
• /
• 2014

The objective of the present case study is to analysis how effectively Hilti, which is a former family firm owned and managed by a family in Liechtenstein as a tiny european country, a land sandwiched between Switzerland and Austria, has made a global market success. Liechtenstein has $160km^2$ land and about 36,000 residents. Despite its small size of country, however, Hilti Corporation doesn't view its location as a liability in its business strategy. Hilti is a global leading provider of professional power tools in building, mining, civil engineering etc. Also, Hilti is a firm with a clear vision to become the leading industry partner for construction professionals and building installations through customer focus, high quality equipment, and tools and systems specially designed for specific jobs. This study considered Hilti as a good case, which verifies that born-conditions, endogenous factors according to Michael Porters diamond model does not decisive role more for international competitiveness of firms. Lessons from Hilti are that in order to obtain and sustain the global competitiveness of small and medium-sized firms in Korean manufacturing sector under high production cost, they have to do actively innovative. Also they can give to customers newer and higher customer-values than competitors in abroad give. The case summarizes that the strategy of Hilti for the global market success is comprised of several factors: Technological and organizational innovation, and a clear customer-value oriented business strategy and its implementation. Innovation and its integration into marketing for the customers value creation is central to Hilti's Success. The present case study is expected to provide insights and implication for many firms in Korea that are seeking to secure global presence and market success.

• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.347-354
• /
• 2014

Economic evaluation of the manufacturing technology of high-value chemicals through the carbonation reaction of carbon dioxide contained in the flue gas was performed, and analysis of the IRR (Internal Rate of Return) and whole profit along the production plan of the final product was conducted. Through a carbonation reaction with sodium hydroxide that is generated from electrolysis and by using carbon dioxide in the combustion gas that is generated in the power plant, it is possible to get a high value products such as sodium bicarbonate compound and also to reduce the carbon dioxide emission simultaneously. The IRR (Internal Rate of Return) and NPV (Net Present Value) methods were used for the economic evaluation of the process which could handle carbon dioxide of 100 tons per day in the period of the 20 years of plant operation. The results of economic evaluation showed that the IRR of baseline case of technology was 67.2% and the profit that obtained during the whole operation period (20 years) was 346,922 million won based on NPV value. When considering ETS due to the emissions trading enforcement that will be activated in 2015, the NPV was improved to a 6,000 million won. Based on this results, it could be concluded that this $CO_2$ carbonation technology is an cost-effective technology option for the reduction of greenhouse gas.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.1
• /
• pp.31-39
• /
• 2014

For mobile application, semiconductor packages are increasingly moving toward high density, miniaturization, lighter and multi-functions. Typical wafer level packages (WLP) is fan-in design, it can not meet high I/O requirement. The fan-out wafer level packages (FOWLPs) with reconfiguration technology have recently emerged as a new WLP technology. In FOWLP, warpage is one of the most critical issues since the thickness of FOWLP is thinner than traditional IC package and warpage of WLP is much larger than the die level package. Warpage affects the throughput and yield of the next manufacturing process as well as wafer handling and fabrication processability. In this study, we investigated the characteristics of warpage and main parameters which affect the warpage deformation of FOWLP using the finite element numerical simulation. In order to minimize the warpage, the characteristics of warpage for various epoxy mold compounds (EMCs) and carrier materials are investigated, and DOE optimization is also performed. In particular, warpage after EMC molding and after carrier detachment process were analyzed respectively. The simulation results indicate that the most influential factor on warpage is CTE of EMC after molding process. EMC material of low CTE and high Tg (glass transition temperature) will reduce the warpage. For carrier material, Alloy42 shows the lowest warpage. Therefore, considering the cost, oxidation and thermal conductivity, Alloy42 or SUS304 is recommend for a carrier material.

• Composites Research
• /
• v.31 no.5
• /
• pp.209-214
• /
• 2018

This paper explain about the development of environmental friendly, low cost and stable supply material i.e., rice husk and shell were used as micro incorporating bio waste filler. Those were processed by ball mill and analyzed through micro observation by FE-SEM, EDS and particle size distribution. The obtained filler was mixed with epoxy resin for the manufacturing of CFRP composite and study tensile properties. In EDS analysis main contents of rice husk and rice husk ash are C, O and Si. When rice husk was burned C and Si ration were increased. Shell powder has C, O and Ca. It caused $CaCO_3$ from shell. Surface weighted mean of rice husk powder is $6.19{\mu}m$ and volume weighted mean is $14.77{\mu}m$. And it has rod type particles which caused hair and husk structure parts. Surface weighted mean of rice husk ash powder is $1.55{\mu}m$ and volume weighted means is $8.20{\mu}m$. Surface weighted mean of shell powder is $2.53{\mu}m$ and volume weighted mean is $5.79{\mu}m$. The tensile decreased with increasing the content of micro filler in CFRP composites. In case of rice husk, the significant decrement of tensile strength was observed. and in case of shell powder, there is no effect of changes take place in tensile strength.