• Journal of the Korean Vacuum Society
• /
• v.21 no.1
• /
• pp.22-28
• /
• 2012

Transparent dye-sensitized solar cells have been widely investigated for the application to building integrated photovoltaic system. Thin film Si-based solar cells are emerging as a substitute for the dye-sensitized solar cells because their merits of well-established manufacturing processes. Since the selective transmitting layer transmits visible light and reflects infrared light, the solar cell efficiency increases with the introduction of the selective transmitting layer. In this work, AlTiO thin films were grown as the selective transmitting layer by cost-effective sputter deposition and their transmittances were improved by controlling deposition parameters.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.5
• /
• pp.31-40
• /
• 2010

This paper describes a LDPC decoder for IEEE 802.11n wireless LAN standard. The designed processor supports parity check matrix for block length of 1,944 and code rate of 1/2 in IEEE 802.11n standard. To reduce hardware complexity, the min-sum algorithm and layered decoding architecture are adopted. A novel memory reduction technique suitable for min-sum algorithm was devised, and our design reduces memory size to 25% of conventional method. The LDPC decoder processor synthesized with a $0.35-{\mu}m$ CMOS cell library has 200,400 gates and memory of 19,400 bits, and the estimated throughput is about 135 Mbps at 80 MHz@2.5v. The designed processor is verified by FPGA implementation and BER evaluation to validate the usefulness as a LDPC decoder.

• Toxicological Research
• /
• v.32 no.4
• /
• pp.281-287
• /
• 2016

Earlier studies conducted on lead-exposed workers have determined the reticulocyte count (RC) (%), but the parameters of Absolute Reticulocyte Count (ARC), Reticulocyte Index (RI), and Reticulocyte Production Index (RPI) were not reported. This study assessed the effect of lead (Pb) exposure on the status of reticulocyte count indices in workers occupied in lead battery plants. The present cross-sectional study was carried out on 391 male lead battery workers. The blood lead levels (BLL) were determined by using an Atomic Absorption Spectrophotometer. The RC (%) was estimated by using the supravital staining method. The parameters, such as ARC, RI, and RPI, were calculated by using the RC (%) with the red cell indices (RBC count and hematocrit). The levels of RBC count and hematocrit were determined by using an ABX Micros ES-60 hematology analyzer. The levels of reticulocyte count indices - RC (%), ARC, RI, and RPI significantly increased with elevated BLL. The association between BLL and reticulocyte count indices was positive and significant. The results of linear multiple regression analysis showed that the reticulocyte count (${\beta}=0.212$, P < 0.001), ARC (${\beta}=0.217$, P < 0.001), RI (${\beta}=0.194$, P < 0.001), and RPI (${\beta}=0.208$, P < 0.001) were positively associated with BLL. The variable, smoking habits, showed a significant positive association with reticulocyte count indices: RC (%) (${\beta}=0.188$, P < 0.001), ARC (${\beta}=0.174$, P < 0.001), RI (${\beta}=0.200$, P < 0.001), and RPI (${\beta}=0.151$, P < 0.005). The study results revealed that lead exposure may cause reticulocytosis with an increase of reticulocyte count indices.

• Korean journal of food and cookery science
• /
• v.29 no.6
• /
• pp.777-784
• /
• 2013

With the development of economy and culture, Korean traditional rice wine, Makgeolli, has been widely consumed with increasing popularity in Korea, China and other Asian countries. In this study, we examined the quality characteristics of red bean Makgeolli: pH, total acidity, alcohol contents, sugar contents, reducing sugar, color, total flavonoid contents, DPPH, microbial properties, sensory evaluation of Makgeolli added with red bean (0, 5, 10 and 15% by rice weight) during fermentation for 7 days. There were no significant differences between samples in acidity, alcohol contents, reducing sugars and yeat cell counts, but total flavonoid contents increased with increasing ratio of red bean(p<0.05). Makgeolli added with 10% red bean showed the highest antioxidation activity, and was not significantly different with Makgeolli without red bean in flavor, sweetness, sourness, bitterness and overall acceptance in sensory evaluation. Therefore, Makgeolli added with 10% red bean was considered to be the most suitable for the manufacturing.

• The Korean Fashion and Textile Research Journal
• /
• v.13 no.5
• /
• pp.806-814
• /
• 2011

A solar jacket, which utilizes solar energy for generating electricity, is an example of clothing developed by the fusion of multiple technologies; such fusion of technologies can lead to further developments in the clothing industry and other industries in general. Many research institutes and garment manufacturing companies in Europe and America are developing solar garments; various solar-based products manufactured using solar cells, photovoltaic batteries, etc. are being sold at high prices. The purpose of this study was to investigate the development status of solar garments and their application for generating photovoltaic energy; the study also identified the type of design and upper body clothing preferred by Korean in their early 20s. The survey participants were 188 university students aged between 20 and 25. The design of the proposed six types of solar clothing was evaluated and rated; they were then ranked on the basis of the ratings. A survey on the management of solar garments was conducted, and ratings were assigned according to a 5-point Likert scale, with 5 indicating the strong affirmation. The survey results showed that among the six types of clothing, protective clothing (50%) and sportswear (22%) were more preferable than the others (working clothes (16%), casual clothes (3%), everyday wear(6%), and suits(1%)). Among the six proposed designs, the jumper design (22%) and jean jacket design (21%) were preferred over the others (casual jacket (19%), casual jacket I (15%), classic suit (14%), and climbing jacket (9%)). Factorial analysis of the management of solar garments revealed that the most important factors were the properties of the solar cell and time required for battery charging, and the second important factors were clothing weight and comfort.

• Polymer(Korea)
• /
• v.27 no.5
• /
• pp.436-442
• /
• 2003

Thermosetting elastomer such as EPDM (Ethylene Propylene Dien Rubber) has been applied to the sponge weatherstrip of a vehicle as a main material. However, the thermosetting elastomers have limited recycling and have brought about the environmental problems. Furthermore, many steps of the manufacturing process such as formulation, mastication and vulcanization make difficult to control uniformity of the endproducts. These problems of current EPDM weatherstrip necessitated development of a new recyclable material, Thermoplastic Vulcanizates (TPV). In this study the influence of the water contents, and the processing conditions. On the foam density and structure in water blowing process was carried out. We found that TPV also can be foamed with water, maintaining the uniformity form this study. Therefore, many inevitable problems of EPDM weatherstrip can be solved, and this new technique is expected to take a roll of making a breakthrough in the rubber industry.

• Journal of Dairy Science and Biotechnology
• /
• v.30 no.2
• /
• pp.119-129
• /
• 2012

Lactic acid bacteria (LAB) have been used as starter cultures in the manufacturing processes of fermented dairy products such as cheese and yogurt. LAB have a proteolytic system to use the nitrogen source from milk for their growth. The proteolytic system involved in casein utilization provides cells with essential amino acids during growth in milk and is also of industrial importance, because of its contribution to the development of the organoleptic properties such as flavor of fermented milk products. In the most extensively studied LAB, Lactococcus lactis, the main features of the proteolytic system comprise 3 groups. The first is proteinase, which initially cleaves the milk protein to peptides. The second group consists of transport systems for the internalization of oligopeptides, which are involved in the cellular uptake of small peptides and amino acids. The third group, peptidases in the cell, cleaves peptides into smaller peptides and amino acids. This review is to provide the information about the proteolytic system of LAB.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.1
• /
• pp.8-14
• /
• 2018

We investigated the levels of microbial contaminants and microbial hazards during dried-laver processing. We analyzed 321 samples obtained from 18 dried-laver Pyropia spp. manufacturing facilities, including water, swab-, and processing samples as well as final products. The levels of microbial contaminants, including viable cell counts (VCC) and coliform bacteria, increased as processing progressed. The sanitary indicator bacterium, Escherichia coli, was not detected in the final products although VCC levels were high, generally exceeding 5 log CFU/g. We also investigated changes in microbial contaminants at each processing step. Both VCC and total coliform dramatically increased after 4 days of continuous processing, indicating that microbial contaminants originated, mainly, from cross contamination during processing.

• Applied Chemistry for Engineering
• /
• v.3 no.4
• /
• pp.701-709
• /
• 1992

Silver particles were impregnated on carbon black with colloidal method and used as catalyst for oxygen electrode in alkaline fuel cell. With the addition of sodium dodecylbenzenesulfonate in $AgNO_3$ and $NaBH_4$solution, colloidal solution was made and confirmed with electrophoresis test. Effects of particle size on electrode performance were studied and $200{\AA}$ of silver particle size shown the highest value of mass activity. The aggromeration of silver particle was Influenced with surfactant amount, stirring time and heat treatment. Considering the increase of particle size caused of operating temperature, recommendable particle size of silver catalyst for manufacturing the electrode was $100{\AA}$. Dispersity of carbon black was investigated and reagglomeration was appeared after homogenizing 30 sec.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.202-202
• /
• 2011

The research of 3-dimensional (3-D) scaffold for tissue engineering has been widely investigated as the importance of the 3-D scaffold increased. 3-D scaffold is needed to support for cells to proliferate and maintain their biological functions. Furthermore, its architecture defines the shape of the new bone and cartilage growth. Polycaprolactone (PCL) has been one of the most promising materials for fabricating 3-D scaffold owing to its excellent mechanical property and biocompatibility. However, there are practical problems for using it, in vitro and in vivo; extracellular matrix components and nutrients cannot penetrate into the inner space of scaffold, due to its hydrophobic property, and thus cell seeding and attachment onto the inner surface remain as a challenge. Thus, the surface modification strategy of 3-D PCL scaffold is prerequisite for successful tissue engineering. Herein, we utilized a mussel-inspired approach for surface modification of 3-D PCL scaffold. Modification of 3-D PCL scaffolds was carried out by simple immersion of scaffolds into the dopamine solution and stimulated body fluid, and as a result, hydroxyapatite-immobilized 3-D PCL scaffolds were obtained. After surface modification, the wettability of 3-D PCL scaffold was considerably changed, and infiltration of the pre-osteoblastic cells into the 3-D scaffold followed by the attachment onto the surface was successfully achieved.