• 치과방사선
• /
• 제20권2호
• /
• pp.265-276
• /
• 1990

가격 5마리의 하악에 치근단부위 병소 60례와 해면골내 병소 60례를 다양한 크기의 bur로 형성한 후 관전압을 변화시켜 촬영한 방사선 사진을 육안적으로 판독하고 농도계로 분석하여 다음과 같은 결론을 얻었다. 1 흑화도가 일정한 경우 65-85kVp범위내의 관전압 변화는 크기가 같은 골내병소의 판독에 영향을 미치지 않았다(P>0.05). 2 병소가 2번 bur이하의 작은 크기일 때 1번 bur병소에 대한 2번 bur병소의 판독은 치근단 병소는 80kVp 이상의 관전압에서 판독이 용이하였으며 (P<0.05), 해면골내 병소는 75kVp이하의 관전압에서 판독이 용이하였다.(p<0.05) 3. 해면골내 한정된 병소는 치밀골을 포함한 병소와 육안적 판독의 차이가 있었으나(p<0.05). 해면골과 치밀골간의 경계부를 포함한 병소와는 육안적 판독의 차이가 없었다. (p>0.05). 4. 농도계로 분석한 결과 육안적 판독점수가 같았던 경우에도 농도계 계측치는 차이가 있었으며, 0.15-1.66㎜정도의 aluminum등 가치차이가 있어야 육안적으로 병소판독이 가능하였다.

• Journal of Periodontal and Implant Science
• /
• 제46권5호
• /
• pp.303-319
• /
• 2016

Purpose: The purpose of this animal study was to perform a 3-dimensional micro-computed tomography (micro-CT) analysis in order to investigate the influence of root surface distance to the alveolar bone and the periodontal ligament on periodontal wound healing after a guided tissue regeneration (GTR) procedure. Methods: Three adult Sus scrofa domesticus specimens were used. The study sample included 6 teeth, corresponding to 2 third mandibular incisors from each animal. After coronectomy, a circumferential bone defect was created in each tooth by means of calibrated piezoelectric inserts. The experimental defects had depths of 3 mm, 5 mm, 7 mm, 9 mm, and 11 mm, with a constant width of 2 mm. One tooth with no defect was used as a control. The defects were covered with a bioresorbable membrane and protected with a flap. After 6 months, the animals were euthanised and tissue blocks were harvested and preserved for micro-CT analysis. Results: New alveolar bone was consistently present in all experimental defects. Signs of root resorption were observed in all samples, with the extent of resorption directly correlated to the vertical extent of the defect; the medial third of the root was the most commonly affected area. Signs of ankylosis were recorded in the defects that were 3 mm and 7 mm in depth. Density and other indicators of bone quality decreased with increasing defect depth. Conclusions: After a GTR procedure, the periodontal ligament and the alveolar bone appeared to compete in periodontal wound healing. Moreover, the observed decrease in bone quality indicators suggests that intrabony defects beyond a critical size cannot be regenerated. This finding may be relevant for the clinical application of periodontal regeneration, since it implies that GTR has a dimensional limit.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제30권2호
• /
• pp.158-164
• /
• 2008

Purpose : Recently, various materials were developed for enhancing bone formation capacity. Platelet rich plasma(PRP) is an autologous source with several growth factors and obtained by sequestering and concentrating platelets by gradient density centrifugation. This study was to evaluate the effect of PRP on healing of grafted bone. Materials and methods : Two blood samples were obtained and analysed for measuring platelet counts of normal blood and PRP. In experimental group, two defects of mandibular bone, 10mm in diameter and 4.0mm deep, were created in the mandible and immediately grafted with autogenous bone chips mixed with PRP. In control group, same bone defects were prepared and grafted with autogenous bone chips. Gelform was used for carrier of PRP. 2 weeks, 4 weeks, 8 weeks later, each group was evaluated with histologi-cal and histomorphometric analyses. Results : According to histological observation, experimental group was showed more anastomosing newly-formed woven bone having osteoblastic activation than control group. According to histomorphometric analysis, there were 9.11% more newly-formed bone volume in experimental group than control group at 2 weeks, 7.91% more at 4 weeks, 20.08% more at 8 weeks. Conclusion: Our results demonstrated PRP in autogenous bone graft could enhance the bone formation.

• Imaging Science in Dentistry
• /
• 제50권3호
• /
• pp.199-208
• /
• 2020

Purpose: This study was performed to introduce an in vivo hybrid multimodality technique involving the coregistration of micro-computed tomography (micro-CT) and high-resolution magnetic resonance imaging (HR-MRI) to concomitantly visualize and quantify mineralization and vascularization at follow-up in a rat model. Materials and Methods: Three adult female rats were randomly assigned as test subjects, with 1 rat serving as a control subject. For 20 weeks, the test rats received a weekly intravenous injection of 30 ㎍/kg zoledronic acid, and the control rat was administered a similar dose of normal saline. Bilateral extraction of the lower first and second molars was performed after 10 weeks. All rats were scanned once every 4 weeks with both micro-CT and HR-MRI. Micro-CT and HR-MRI images were registered and fused in the same 3-dimensional region to quantify blood flow velocity and trabecular bone thickness at T0 (baseline), T4 (4 weeks), T8 (8 weeks), T12 (12 weeks), T16 (16 weeks), and T20 (20 weeks). Histological assessment was the gold standard with which the findings were compared. Results: The histomorphometric images at T20 aligned with the HR-MRI findings, with both test and control rats demonstrating reduced trabecular bone vasculature and blood vessel density. The micro-CT findings were also consistent with the histomorphometric changes, which revealed that the test rats had thicker trabecular bone and smaller marrow spaces than the control rat. Conclusion: The combination of micro-CT and HR-MRI may be considered a powerful non-invasive novel technique for the longitudinal quantification of localized mineralization and vascularization.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제46권4호
• /
• pp.240-249
• /
• 2020

Objectives: Although the side effects of radiation therapy vary from mucositis to osteomyelitis depending on the dose of radiation therapy, to date, an experimental animal model has not yet been proposed. The aim of this study was to develop an animal model for assessing complications of irradiated bone, especially to quantify the dose of radiation needed to develop a rat model. Materials and Methods: Sixteen Sprague-Dawley rats aged seven weeks with a mean weight of 267.59 g were used. Atraumatic extraction of a right mandibular first molar was performed. At one week after the extraction, the rats were randomized into four groups and received a single dose of external radiation administered to the right lower jaw at a level of 14, 16, 18, or 20 Gy, respectively. Clinical alopecia with body weight changes were compared and bony volumetric analysis with micro-computed tomography (CT), histologic analysis with H&E were performed. Results: The progression of the skin alopecia was different depending on the irradiation dose. Micro-CT parameters including bone volume, bone volume/tissue volume, bone mineral density, and trabecular spaces, showed no significant differences. The progression of osteoradionecrosis (ORN) along with that of inflammation, fibrosis, and bone resorption, was found with increased osteoclast or fibrosis in the radiated group. As the radiation dose increases, osteoclast numbers begin to decrease and osteoclast tends to increase. Osteoclasts respond more sensitively to the radiation dose, and osteoblasts are degraded at doses above 18 Gy. Conclusion: A standardized animal model clinically comparable to ORN of the jaw is a valuable tool that can be used to examine the pathophysiology of the disease and trial any potential treatment modalities. We present a methodology for the use of an experimental rat model that incorporates a guideline regarding radiation dose.

• Journal of Periodontal and Implant Science
• /
• 제38권sup2호
• /
• pp.373-384
• /
• 2008

Purpose: The aim of this study is to compare the healing response of various Hydroxyapatite(HA) coated dental implants by Ion-Beam Assisted Deposition(IBAD) placed in the surgically created circumferential gap in dogs. Materials and methods: In four mongrel dogs, all mandibular premolars and the first molar were extracted. After an 8 weeks healing period, six submerged type implants were placed and the circumferential cylindrical 2mm coronal defects around the implants were made surgically with customized step drills. Groups were divided into six groups : anodized surface, anodized surface with 150nm HA and heat treatment, anodized surface with 300nm HA and heat treatment, anodized surface with 150nm HA and no heat treatment, and anodized surface with 150nm HA, heat treatment and bone graft, anodized surface with bone graft. The dogs were sacrificed following 12 weeks healing period. Specimens were analyzed histologically and histomorphometrically. Results: During the healing period, healing was uneventful and implants were well maintained. Anodized surface with HA coating and $430^{\circ}C$ heat treatment showed an improved regenerative characteristics. Most of the gaps were filled with newly regenerated bone. The implant surface was covered with bone layer as base for intensive bone formation and remodeling. In case that graft the alloplastic material to the gaps, most of the coronal gaps were filled with newly formed bone and remaining graft particles. The bone-implant contact and bone density parameters showed similar results with the histological findings. The bone graft group presented the best bone-implant contact value which had statistical significance. Conclusion: Within the scope of this study, nano-scale HA coated dental implants appeared to have significant effect on the development of new bone formation. And additional bone graft is an effective method in overcoming the gaps around the implants.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제46권3호
• /
• pp.191-196
• /
• 2020

Objectives: Beyond the original application approved by the U.S. Food and Drug Administration, recombinant human bone morphogenetic protein-2 (rhBMP-2) is used for medication-related osteonecrosis of the jaw (MRONJ) treatment because of its bone remodeling enhancement properties. The purpose of the study was to investigate the bone formation effect of rhBMP-2/absorbable collagen sponge (ACS) in patients with MRONJ. Materials and Methods: In this retrospective cohort study, 26 female patients diagnosed with MRONJ and who underwent mandibular sequestrectomy at Ajou University Dental Hospital from 2010 to 2018 were included. The experimental group was composed of 18 patients who received rhBMP-2/ACS after sequestrectomy, while the control group was composed of 8 patients who did not receive rhBMP-2/ACS after sequestrectomy. A total dose of 0.5 mg of rhBMP-2 was used in the experimental group at a concentration of 0.5 mg/mL. Follow-up panoramic X-rays were taken immediately after the surgery and more than 6 months after the surgery. Using those X-rays, a radiographic index of bone defect area was calculated using the modified Ihan Hren method, which measures radiographic density of the normal bone and the defect site. Results: This study suggests that rhBMP-2 contributes to new bone formation. The mean radiographic index immediately after surgery and more than 6 months after the surgery for the experimental group was 68.4% and 79.8%, respectively. The mean radiographic index immediately after surgery and more than 6 months after the surgery for the control group was 73.4% and 76.7%, respectively (Wilcoxon signed rank test, P>0.05). The mean radiographic index increased 11.4% in the experimental group and 3.27% in the control group (Mann-Whitney U-test, P<0.05). Conclusion: Based on the results, use of rhBMP-2/ACS on bone defect sites after sequestrectomy could be a successful strategy for treatment of MRONJ patients.

• 치위생과학회지
• /
• 제15권2호
• /
• pp.98-105
• /
• 2015

본 연구는 외과적으로 형성된 흰쥐 하악골 결손부에 S.mutan에서 분리 정제된 mutan을 주사하고, ${\mu}CT$로 촬영하여 골결손부의 치유에 미치는 영향을 3차원 골 미세구조 지표로 평가하기 위하여 실시하였다. 흰쥐 치조골에 임계 크기 결손부인 1.5 mm 지름의 원형 결손부를 형성하여 대조군에는 동일량의 saline을 투여하고, 실험군으로 LPS와, mutan을 주사하여 골치유에 미치는 영향을 관찰하였다. 수술 후 4주에 희생하고 치유 결과를 3차원 미세구조의 형태 계측학적 지표값을 비교 분석하여 다음과 같은 결론을 얻었다. 실험동물의 체중변화는 총 12회 투여 기간 동안 일정한 증가를 나타냈다. 8회차부터 mutan 처리군은 대조군과 비교하여 유의한 차이를 보였으며(p<0.05), 9회차에는 mutan 처리군이 대조군과 LPS 처리군과 비교하여(p<0.05), 10~12회차에는 LPS 처리군과 비교하여 유의한 체중증가를 나타냈다(p<0.01). Mutan이 생체 내에서 하악의 골치유 효과를 알아보기 위해 ${\mu}CT$를 통해 형태계측학적 지표 분석 결과, 대조군에 비해 LPS 처리군에서 뚜렷한 골결손부 치유 지연 및 골흡수 양상을 보였으며, mutan 처리군 은 LPS의 작용보다 미약하지만 골치유를 지연시키는 것으로 확인되었다. ${\mu}CT$를 통해 골밀도 분석 결과, 대조군과 비교하여 LPS와 muatn 처리군에서 낮은 골밀도치를 나타냈고, mutan은 LPS 처리군보다 유의하게 높은 골밀도치를 보였다(p<0.01).

• 대한소아치과학회지
• /
• 제48권1호
• /
• pp.50-63
• /
• 2021

소두증 골형성이상 원발성 왜소증 제 II 형(MOPD II)은 원발성 왜소증의 일종으로 pericentrin 유전자의 돌연변이에 의해 유발되며 상염색체 열성으로 유전된다. 이번 연구는 MOPD II의 임상적 및 방사선학적 소견과 더불어 치아의 물리화학적 특성 및 미세구조에 대한 분석을 목적으로 하였다. MOPD II 환자의 발치된 하악 제2대구치를 대상으로 하였으며 미세 전산화 단층 촬영, 주사형 전자 현미경과 에너지 분산형 분광분석법 및 비커스 미세경도 분석을 이용하여 분석하였다. MOPD II 치아는 정상 치아와 비교 시 치근 및 치수의 이형성을 보였으며 크기가 작았다. 치아의 무기질 밀도는 법랑질에서는 비슷한 값을 보였으며 상아질에서는 치근 1/2 및 치근단 부위에서 MOPD II 치아가 정상 치아보다 작게 나타났다. 미세경도의 비교 시 교두 법랑질과 치근 1/2 및 치근단 부위의 상아질에서 MOPD II 치아의 미세경도가 정상 치아보다 작게 나타났다. 이 연구에서는 MOPD II의 치과적인 특징 및 치아의 물리화학적 특성에 대하여 분석함으로써, 질환의 구강 내 소견에 대한 이해도를 높이고 치과 치료 시 주의점을 확인하여 적절한 치료를 하는데 도움이 되고자 하였다.

• Journal of Periodontal and Implant Science
• /
• 제52권4호
• /
• pp.338-350
• /
• 2022

Purpose: Various studies have investigated 3-dimensional (3D)-printed implants using Ti6Al-4V powder; however, multi-root 3D-printed implants have not been fully investigated. The purpose of this study was to explore the stability of multirooted 3D-printed implants with lattice and solid structures. The secondary outcomes were comparisons between the 2 types of 3D-printed implants in micro-computed tomographic and histological analyses. Methods: Lattice- and solid-type 3D-printed implants for the left and right mandibular third premolars in beagle dogs were fabricated. Four implants in each group were placed immediately following tooth extraction. Implant stability measurement and periapical X-rays were performed every 2 weeks for 12 weeks. Peri-implant bone volume/tissue volume (BV/TV) and bone mineral density (BMD) were measured by micro-computed tomography. Bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) were measured in histomorphometric analyses. Results: All 4 lattice-type 3D-printed implants survived. Three solid-type 3D-printed implants were removed before the planned sacrifice date due to implant mobility. A slight, gradual increase in implant stability values from implant surgery to 4 weeks after surgery was observed in the lattice-type 3D-printed implants. The marginal bone change of the surviving solid-type 3D-printed implant was approximately 5 mm, whereas the value was approximately 2 mm in the lattice-type 3D-printed implants. BV/TV and BMD in the lattice type 3D-printed implants were similar to those in the surviving solid-type implant. However, BIC and BAFO were lower in the surviving solid-type 3D-printed implant than in the lattice-type 3D-printed implants. Conclusions: Within the limits of this preclinical study, 3D-printed implants of double-rooted teeth showed high primary stability. However, 3D-printed implants with interlocking structures such as lattices might provide high secondary stability and successful osseointegration.