• Journal of Korea Water Resources Association
• /
• v.51 no.3
• /
• pp.195-205
• /
• 2018

Drought is a complex phenomenon caused by various factors which can be classified into natural and anthropogenic causes. In Korea, the natural drought typically occurs when the high pressure of the Pacific Ocean develops rapidly or becomes stronger than usual in summer, resulting in a short-lived monsoon season. Drought also can be classified into meteorological, agricultural, hydrological, and socioeconomic drought depending on the development process and consequences. Each type of droughts can influence the other drought types directly or indirectly. Drought propagation refers a phenomenon that changes from meteorological drought to agricultural or hydrological drought. In this study, the occurrence and patterns of drought propagation are evaluated. The relationship between meteorological and agricultural droughts was assessed using hydrometeorological data. We classified the types of drought into five categories to evaluate the occurrence and characteristics of drought propagation. As results, we found drought propagation did not occur or delayed until three months, depending on the type of drought. The further generalized relationship of drought propagation is expected to be used for predicting agricultural drought from the preceding meteorological drought.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3B
• /
• pp.205-209
• /
• 2011

The low carrying capacity caused by the deposition in a sewer line is one of the main reason of the urban flood. Therefore, an efficient maintenance and management of the storm water drainage system is very important to prevent urban flood. In this research, the sediment transport characteristics through a pressure pipeline were examined with laboratory experiments. Bed-forms in a pipeline, sediment rates, roughness due to sediments were examined. Experimental system consists of flow circulation system with a pump and a sediment feeder at the upstream of the pipeline. Sediments were supplied into a 60 mm-diameter and 8 m-long pipe. Maximum flow rate is $30m^3/hr$, and the sediment feeding rate range is 5 g/s~19 g/s. Governing parameters and estimation equation for sediment transport rate were developed. The mean velocity (U), coefficient of viscosity (${\mu}$), unit width bed load ($q_b$), mean diameter of particle ($d_{50}$), unit weight of sediment in water (${\gamma}^{\prime}_s$) were adopted as the most influencing factors of sediment transport patterns. The prediction equation for sediment transport rate were developed with two dimensionless terms. These two dimensionless terms showed a linear relationship with high correlation coefficient.

• Journal of Digital Convergence
• /
• v.15 no.8
• /
• pp.1-14
• /
• 2017

This study is a descriptive and exploratory one aiming to develop a systematic/diagnostic manual that is necessary for the improvement of the pedestrian safety of a neighborhood and show the practical application and usefulness of the manual through a case study. The diagnostic manual developed on the basis of the previous research review adopted a mixed research method including three investigation tools of map/data analysis using secondary data, field observation by investigators, and resident survey interview. In the case study applying the manual to Changsin-dong, Seoul, the author analyzed the results of the three investigations in integrative ways and showed the usefulness of the manual by systematically deriving the places prone to pedestrian-vehicle accidents and the influencing factors. This study contributes to the practical field in that it provides planners with a systematic tool to diagnose the pedestrian safety in the neighborhood environment while it contributes to the academic field in that it provides the concrete process that empirically compares the differences between different environmental investigative methods and deduce integrative implication from them. In a follow-up study, the author plan to apply the diagnostic manual presented in this study to more cases and improve them to work in various contexts.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.1
• /
• pp.76-87
• /
• 1998

The concentration of welding fume was measured by 221 welders themselves in chassis frame workplace of the manufactory from February, 1, 1996 to May, 31, 1997. Welding parameters were the welding current and the distance between helmet and arc. Those two optimum conditions were proposed by excess probability analysis using logistic regression, so the best position in the workplace was proposed considering two factors to control the welding fume. The results are as followings; 1) The excess proability of welding fume TLV was over 99% in above 260 Amperes of welding current and also in below 30cm of distanced between helmet and arc. 2) The equation from logistic regression analysis using SPSS/PC+5.02 had the welding current as a independent variable and the excess of welding fume TLV as a dependent variable (p<0.05). Logit(welding fume TLV) = 0.1296 ${\times}$ wlding currnet - 28.8750 3) The equation from logistic regression analysis using SPSS/PC+5.02 had the distance between helmet and arc as a independent variable and the excess of welding fume threshold limit value a, a dependent variable (p<0.05). Logit (welding fume TLV) = -0.6809 ${\times}$ distance between helmet and arc +25.1665 4) Considering both cases or 2) and 3). the result equation is following. (p<0.05). Logit (welding fume TLV) = 0.1346 ${\times}$ welding current -0.3859 ${\times}$ distance between helmet and arc -15.7382 5) The excess probability of welding fume threshold limit value was 100% in above 240 Ampere of welding current. Thus, below 220 Ampere can be suggested to reduce the 40% number of welders who have a excess welding fume threshold limit value. 6) The excess probability of welding fume TLV was 100% in below 34cm of distance between helmet and arc. Thus, over 38cm can be suggested to reduce the 33% number of welders who have a excess welding fume TLV. 7) Considering both 5) and 6) cases, first of all, the best welding current can be 200 Ampere to have a below 15% of welding fume excess probability for the welders who works in distance of 34-37cm. Secondly, to have a below 30% excess probability of welding fume TLV, the working distance must be over 38cm in 220 Ampere and 32cm in 200 Ampere. 8) To reduce the average exposure concentration of welding fume ($8.21{\pm}5.83mg/m^3$), the movable local exhaust system equipped with flexible hoods can be used.

• Journal of Environmental Policy
• /
• v.13 no.4
• /
• pp.135-159
• /
• 2014

Industrial insect is defined as the insect utilized in industries that creates added value. Most of the industrial insects used in Korea are exotic species that are introduced through artificial means. Despite the rapid expansion of market for industrial insects, the system for risk assessment of industrial insects is not being adequately conducted. Although Korea carries out a risk assessment for the species designated as disease and insect pest by Animal and Plant Quarantine Agency, far too little consideration is being given to overall ecosystem, as the control system is covered in the Plant Quarantine Law. To solve this problem, we analyzed the Korean risk assessment system and looked at systems in other countries. The results show that it is essential for stakeholders to reach an agreement to set up fundamental directions for the system. Unless the integration system of taxonomical and ecological information is prepared, the ecological risk assessment should be conservative to protect ecosystems and should also follow the precautionary principle. It also requires cooperation among the ministries. In addition, the results indicated that a differentiation between risk assessment and screening is urgent. Several solutions such as setting up clear objectives in both assessment and screening stages, target species, steering organization and assessment criteria assessment systems from were proposed as practical institutional strategies. Among many foreign countries the assessment system from Ireland equally considers various factors such as economical, ecological safety and management aspects, It is also based on precautionary principle to fulfil its original purpose. It was suggested that the Ireland system would be the best reference that can be modified and applied into the Korean system by considering distinct characteristics of the industrial insects.

• Women's Health Nursing
• /
• v.7 no.4
• /
• pp.447-460
• /
• 2001

The purpose of this study were to identify a relationship between symptom of health and fatigue-regulation behavior in middle-aged women. The subjects were 241 women living in Seoul and near the city, ranging in ages of 30-59(mean= 42.1 years) being interviewed during the month of Oct. to Dec., 2000. The following questionnaires were utilized in this study: a self reported symptom of health and a fatigue-regulation behavior scale originated from Kwon(1997). The analysis for the data was done by SAS program, t-test, ANOVA, and Pearson correlation. The results of this study were as follows 1. Total mean scores of health status were shown 29.1, physical symptom 17.9 and psychological symptom 11.2. According to symptom of body system were higher in muscular-skeletal sympom 5.5, neurologic symptom 3.5, and digestive symptom 2.7. 2. The mean scores of symptom of health were significantly different in duraion of marriage, status of menstruation, perceived fatigue, perceived cause of fatigue, perceived help of family, hours of sleep. Physical symptom was significantly different in years of educational, status of menstruation, perceived fatigue, perceived cause of fatigue, perceived help of family, hours of sleep. Psychological symptom was significantly different in parity, whether or not having past illness, perceived fatigue. 3. The neurologic symptom was significantly different in years of education, status of menstruation, perceived fatigue, time to rest The respiratory symptom was significantly different in years of education, status of menstruation and hours of physical exercise. The muscular-skeletal symptom was significantly different duration of marriage, status of menstruation, BMI. perceived fatigue, perceived cause of fatigue, perceived help of family. The cardiovascular symptom was significantly different in whether or not having religion, number of children, duration of marriage, number of pregnancy & abortion, parity, status of menstruation, BMI. The digestive symptom was significantly different in whether or not having religion and the number of children. The urologic symptom was significantly different in whether or not having job, type of family, status of menstruation, BMI, perceived fatigue, perceived cause of fatigue, perceived help of family. The score of fatigue was significantly different in number of pregnancy. 4. There were significantly positive relationships in the area of symptom on health, especially fatigue was significantly positive relationships in score of symptom of health, physical symptom and psychological symptom. 5. They choose fatigue-regulation behavior physical rest, method of diversion, management of stress, enough sleep, and psychological rest in order. In the near future, it is required that further studies investigate socio-environmental factors related to symptoms of health and develop programs motivating fatigue-regulation behaviors actively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.5
• /
• pp.1123-1133
• /
• 2015

This study proposed an evaluation method of mobile emissions reduction strategies for air quality management. The proposed method was considered Travel Demand Model (TDM) and Analytic Hierarchy Process (AHP), while an existing method was focused on quantitative factors. AHP of the evaluation indices of mobile emissions reduction strategies show that quantitative evaluation indices such as air pollutants and greenhouse gas reduction are more important than the political evaluation indices (Consistency with an upper plan, Policy applicability, Technical applicability and feasibility) and each weight of air pollutants and greenhouse gas reduction are found to be 0.373 and 0.218. The early scrapping policy of decrepit diesel vehicle is the best policy in the proposal method using TDM and AHP but this result differs from evaluated result by TDM or AHP respectively. These results are limited to the basic assumption and range of reduction scenarios but are expected to contribute to establish more reasonable and effective mobile emission reduction strategies.

• Journal of Korea Water Resources Association
• /
• v.51 no.11
• /
• pp.989-998
• /
• 2018

Connectivity between water source and demand node can be served as a critical system performance indicator of the degree of water distribution network (WDN)' failure severity under abnormal conditions. Graph theory-based approaches have been widely applied to quantify the connectivity due to WDN's graph-like topological feature. However, most previous studies used undirected-unweighted graph theory which is not proper to WDN. In this study, the directed-weighted graph theory was applied for WDN connectivity analyses. We also proposed novel connectivity indicators, Source-to-Node Shortest Pathway (SNSP) and SNSP-Degree (SNSP-D) which is an inverse of the SNSP value, that does not require complicate hydraulic simulation of a WDN of interest. The proposed SNSP-D index was demonstrated in total 42 networks in J City, South Korea in which Pearson Correlation Coefficient (PCC) between the proposed SNSP-D and four other system performance indicators was computed: three resilience indexes and an energy efficiency metric. It was confirmed that a system representative value of the SNSP-D has strong correlation with all resilience and energy efficiency indexes (PCC = 0.87 on average). Especially, PCC was higher than 0.93 with modified resilience index (MRI) and energy efficiency indicator. In addition, a multiple linear regression analysis was performed to identify the system hydraulic characteristic factors that affect the correlation between SNSP-D and other system performance indicators. The proposed SNSP is expected to be served as a useful surrogate measure of resilience and/or energy efficiency indexes in practice.

• Ocean and Polar Research
• /
• v.32 no.4
• /
• pp.449-462
• /
• 2010

Ongoing port baseline surveys are essential for developing ballast water management procedures in order to control unwanted or potentially risky species. Seasonal distributional patterns of marine dinoflagellate Noctiluca scintillans internationally recognized as harmful species and the related environmental factors were surveyed at Incheon, Gwangyang and Ulsan seaports in Korea from 2007 to 2009. The above three seaports were chosen because of their status as the busiest in Korea and characterized by their different bioregions. Average temperature ranged from $2.08^{\circ}C$ in winter to $26.39^{\circ}C$ in summer at Incheon, $7.22^{\circ}C$ in winter to $25.77^{\circ}C$ in summer at Gwangyang, and $11.59^{\circ}C$ in winter to $21.67^{\circ}C$ in summer at Ulsan during the study period. Average salinity varied from 26.88 in winter to 31.25 in summer at Incheon, 22.83 in winter to 33.41 in summer at Gwangyang, and 30.04 in winter to 33.90 in summer at Ulsan. Noctiluca scintillans appeared consistently at all ports during the study period, indicating its eurythermal and euryhaline nature. The highest abundances (21,813 to 41,753 $inds{\cdot}m^{-3}$) of N. scintillans were observed in May 2008 and 2009 at the outer stations of Incheon port. Abundances of between 10,000 and 30,000 $inds{\cdot}m^{-3}$ were only observed at the innermost station of Ulsan in May, while abundances of between 10,000 and 40,000 $inds{\cdot}m^{-3}$ were frequently observed throughout all stations at Gwangyang during the study period, coinciding with consistently high concentration of chlorophyll-a (hereafter chl-a) ($4.32-8.24\;{\mu}g\;l^{-1}$) compared to other ports. Spatio-temporal variation of chl-a concentration was not significantly correlated with abundances of N. scintillans (p>0.01). However, relatively high chl-a concentrations were consistently recorded along with high abundances of N. scintillans throughout all stations at Gwangyang compared to other ports. Abundances of N. scintillans observed at the three surveyed ports did not significantly (p>0.01) affect the concentration of dissolved oxygen in the surface mixed layer, indicating that the species abundances were not enough to cause reduction of dissolved oxygen during the study period. Presented results indicated that the Gwangyang seaport may provide the most suitable environment for a wide range of N. scintillans blooming compared to other ports.

• Journal of the Society of Disaster Information
• /
• v.16 no.1
• /
• pp.60-69
• /
• 2020

Purpose: Cavity growth process monitoring is to periodically monitor changes in common size and topography for general and observational grades to predict the rate of common growth. The purpose of this study is to establish a systematic cavity management plan by evaluating the general and observational class community in a non-destructive method. Method: Using GPR exploration equipment, the acquired surface image and the surrounding status image are analyzed in the GPR probe radargram in depth, profile, and cross section of the location. The exact location is selected using the distance and surrounding markings shown on the road surface of the initial detection cavity, and the test cavity is analyzed by calling the radar at the corresponding location. Result: As a result of monitoring tests conducted at a cavity 30 sites of general and observation grade, nine sites have been recovered. Changes in scale were seen in 21 cavity locations, and changes in size and grade occurred in 13 locations. Conclusion: The under road cavity is caused by various causes such as damage to the burial site, poor construction, soil leakage caused by groundwater leakage, waste and ground vibration. Among them, indirect factors could infer the effects of groundwater and localized rainfall.