• Journal of the Korean Home Economics Association
• /
• v.44 no.1 s.215
• /
• pp.151-157
• /
• 2006

Ten types of male headgear-Kwonwoonkwan, crown-like headgear, hats with a square flap, hats with feathers, crowns with plumes, Ballip, hats with flat crowns, Somo, turban, and fur hats-were described in Jip-Sah, which was published in the 14th century. Mongolian people used summer headgear, winter hats, and crown ornaments, which had been used until the Ch'ing dynasty of China. From the late 12th century to 1304, the headgear styles remained the same, suggesting that the Mongolian people kept their tradition. Kwonwoonkwan, crown-like headgear, and Somo, presented in Jip-Sah, were also described in U. Yadamsuren's album, a pictorial depiction of the 20th century Mongolian headgear.

• The Research Journal of the Costume Culture
• /
• v.9 no.2
• /
• pp.295-307
• /
• 2001

This study was investigated to a effect of sociocultural environment on the vicissitudes of headgear in Europe on 19th Century. Form of headgear was increasingly more functional and simple. It was needed various items with various usage. Since Industrial Revolution the french Revolution. A diffusion of sport and increase of leisure time gave rise to entrance of mass headgear with reasonability and simplicity. But female headgear was more decorative than males. Until late 19th century when female has participated in social performance, female headgear was not functional and simple form. More often female took male headgear(fedora, straw boater, cap, tc.) than bonnet when female role-awareness was changed and sport is diffused.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.8 s.145
• /
• pp.1079-1091
• /
• 2005

The purpose of this study was to point out the unification of the size of swimming headgear by measuring detailed measurement of head ferm and systematizes the head form. A total of 300 male and female Korean adults aged from 18 years old to 35 years old were measured through the direct measurement method. This study attempted to identify the head form of male and female adults using measurement data and the head form was classified through factor analysis and cluster analysis. (1) Based on the fact that this study especially focuses on the size of swimming headgear, factor analysis was performed far both direct measurements with hair and without hair. For the measurements with hair, seven factors were extracted. They were head thickness factor, head width factor, width of side head factor, height of back head factor, length of front head factor, circumference of front head factor, thickness of front head factor and head height factor. They explained the $70.95\%$ of the measurements. (2) The cluster analysis was executed to classify the somatotype of the korean head form on the basis of similarity. According to the cluster analysis result, the measurements with hair categorized types, 'Woman's long-hair type', 'Small type', 'Long and flat type', 'Large type'. (3) Head circumference B and Left tragion - Vertex - Right tragion circumference which are generally length and width in choosing swimming headgear size were selected as measurement items far size of swimming headgear. Direct measurements and sizes of four swimming headgear with different materials taking into account their elongation rate were also compared.

• Journal of the Korean Society of Costume
• /
• v.60 no.10
• /
• pp.163-179
• /
• 2010

False sleeves are 'the sleeves that are attached to clothes but exist just as a part without any function to put arms in them.' They are different from sleeves to put arms in them and are to follow the trend or a way of wearing clothes. They are mostly found in medieval Europe's decorative sleeves named 'Hanging sleeves', but they are also found in Eastern region, too. They are found in sleeves that attached women's headgear in East and Middle Asia, and also in high-class male caftan in Ottoman Turk in the 16th and 17th century. False sleeves can be divided into two kinds by shapes. The first ones are the decorative sleeves of which trunk-shaped sleeves hang around the whole or part of the arm hole but have no function to put arms in them; this is called as 'sleeve-shaped False sleeves'. These sleeves are found in women's headgear in medieval Europe, Ottoman Turk, and East and Middle Asia. False sleeves in Europe and Ottoman Turk played a role in showing wealth and power while those in East and Middle Asia had a great role in highlighting the costume's decorative effect. The second ones are the sleeves hanging down from the arms by attaching long cloth to the arm hole, in design; these are named as 'cape-shaped False sleeves.' This style is found only in medieval Europe, and presumably, these cape-shaped false sleeves may have played a role in boasting of one's wealth and power.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.1
• /
• pp.117-127
• /
• 1991

When open reduction of maxilla fractures is postponed due to concurrent life-threatening injuries, delayed union may result with malunion or nonunion. If delayed malunion is occurred, significant facial deformity may result, including a dished-out face, irregular retromaxillism with Angle's class III malocclusion, open anterior bite, nasal collapse, telecanthus and malar flattening. The treatment planning for this problem includes cephalometric evaluation anterior and lateral tomograms, dental casts, orthodontic planning, dental planning and use of impression tray to rupture the fibrous tissue casts, orthodontic planning, dental planning and use of impression tray to rupture the fibrous tissue attachment at the fracture site. In this paper, one case presented a 58-year-old female patient with maxilla retrusion after comminuted fracture, who was treated with orthodontic methods of maxillary protraction headgear and Plaster headcap, whereas the other two cases were about male patients who were treated principally with surgically open reduction or Le Fort I-controlled transverse osteotomy with iliac bone graft.

• The korean journal of orthodontics
• /
• v.18 no.1 s.25
• /
• pp.105-112
• /
• 1988

To predict duration of orthodontic treatment of malocclusion, 304 male and female patients whose orthodontic treatment was finished in department of orthodontics, Infirmary of dental college, Chosun University were studied. The duration of treatment was studied according to types of malocclusion, beginning ages of treatment, Hellman's dental ages, the determination of tooth extraction, types of tooth extraction and types of orthodontic appliance. The following results were obtained. 1. The duration of treatment was 18 months in Class I malocclusion, 20 months in Class II malocclusion and 24 months in Class III malocclusion. 2. The more early treatment was done, the more duration of treatment was needed according to beginning age of treatment and Hellman's dental ages. 3. Treatment of tooth extraction case was needed for 78 days more than that of non-extraction case. 4. The duration of treatment with unilateral extraction of premolars was the shortest (598 days) and that with single arch extraction of premolars was the longest (685 days) according to types of tooth extraction. 5. The duration of treatment by removable appliance was the shortest (237 days) and the combination of removable appliance, headgear and full banded appliance was the longest (1425 days) according to types of orthodontic appliance. 6. The duration of treatment was 18 months in typical orthodontic treatment with 4 extraction of premolar and full banded appliance.

• The korean journal of orthodontics
• /
• v.34 no.3 s.104
• /
• pp.269-277
• /
• 2004

A modified removable appliance for molar distalization called C-activator was used in a 10-year old male patient with a Class II anterior deep bite malocclusion with upper arch discrepancy. The treatment plan involved correcting the Class ll relationship, distalizing both upper first molars, and regaining space for the erupting canines. The C-activator, which was used for 6 months, consisted of a labial framework formed from .036-in stainless steel wire and an acrylic monobloc. Both the closed helices of the labial framework were compressed for reactivation during the C-activator treatment period. C-activator mechanics simultaneously achieved distalization of the upper first molars into their proper positions and repositioning of the mandible. After 21 months of treatment, the correct oberbite and overjet was obtained and contributed to an Improvement in facial balance. The treatment results were stable 6 months after debonding. Fabrication and placement of the new appliance and clinical procedures are detailed, and the treatment sequence and results of this case are presented as follows.

• The korean journal of orthodontics
• /
• v.31 no.3 s.86
• /
• pp.311-323
• /
• 2001

One of the various mechanics used to treat unilateral Class II malocclusion is head gear with asymmetric face bow. We made the finite element models of unilateral Class II maxillary dental arch and power arm asymmetric face bow. We designed this experiment to observe stress distribution of periodontal ligament, reaction force, and displacement and to understand force system, so to predict the therapeutic effect. On the basis of computerized tomograph of maxillary dental arch of 25 years old male with normal occlusion without extraction and orthodontic treatment history, we made finite element models of maxillary dental arch and periodontal ligament. Then we modified that model to unilateral maxillary Class II malocclusion model of which maxillary left molar displaced mesially. Also, We made finite element model of asymmetric face bow of which right outer bow shorter than left by 25mm(RMO, Penta-FormTM/Medium size, 0.045 inch iner bow, 0.072 inch outer bow). After that, retraction force of 250g, 300b, 350g were applied to maxillary first molar. We concluded as follow. 1. The Net force that both maxillary first molars were received increased as the retraction force increased. Mesially positioned tooth received more force than normally positioned tooth. But, both tooth were received distal force, so distal movement occured. 2. Both tooth received buccal lateral force. In analysis of force element, as the retraction force were increased, force of X-axis at mesially positioned tooth decreased, and force of X-axis at normally positioned tooth increased. so lateral force component moved to the side received less force from more force. 3. There were rotation, tipping with distal movement in maxillary first molar. As retraction force were increased, rotation and tipping also increased. More tipping and rotation occured at the side received more force, that is, mesially positioned tooth. Though it Is small change, displacement of same pattern occur in normally positioned tooth

• Journal of Intelligence and Information Systems
• /
• v.22 no.3
• /
• pp.165-183
• /
• 2016

Over the past decade, there has been a rapid diffusion of technological devices and a rising number of various devices, resulting in an escalation of virtual reality technology. Technological market has rapidly been changed from smartphone to wearable devices based on virtual reality. Virtual reality can make users feel real situation through sensing interaction, voice, motion capture and so on. Facebook.com, Google, Samsung, LG, Sony and so on have investigated developing platform of virtual reality. the pricing of virtual reality devices also had decreased into 30% from their launched period. Thus market infrastructure in virtual reality have rapidly been developed to crease marketplace. However, most consumers recognize that virtual reality is not ease to purchase or use. That could not lead consumers to positive attitude for devices and purchase the related devices in the early market. Through previous studies related to virtual reality, there are few studies focusing on why the devices for virtual reality stayed in early stage in adoption & diffusion context in the market. Almost previous studies considered the reasons of hard adoption for innovative products in the viewpoints of Typology of Innovation Resistance, MIR(Management of Innovation Resistant), UTAUT & UTAUT2. However, product-based antecedents also important to increase user intention to purchase and use products in the technological market. In this study, we focus on user acceptance and resistance for increasing purchase and usage promotions of wearable devices related to virtual reality based on headgear products like Galaxy Gear. Especially, we added a variables like attitude confidence as a dimension for user resistance. The research questions of this study are follows. First, how attitude confidence and innovativeness resistance affect user intention to use? Second, What factors related to content and brand contexts can affect user intention to use? This research collected data from the participants who have experiences using virtual rality headgears aged between 20s to 50s located in South Korea. In order to collect data, this study used a pilot test and through making face-to-face interviews on three specialists, face validity and content validity were evaluated for the questionnaire validity. Cleansing the data, we dropped some outliers and data of irrelevant papers. Totally, 156 responses were used for testing the suggested hypotheses. Through collecting data, demographics and the relationships among variables were analyzed through conducting structural equation modeling by PLS. The data showed that the sex of respondents who have experience using social commerce sites (male=86(55.1%), female=70(44.9%). The ages of respondents are mostly from 20s (74.4%) to 30s (16.7%). 126 respondents (80.8%) have used virtual reality devices. The results of our model estimation are as follows. With the exception of Hypothesis 1 and 7, which deals with the two relationships between brand awareness to attitude confidence, and quality of content to perceived enjoyment, all of our hypotheses were supported. In compliance with our hypotheses, perceived ease of use (H2) and use innovativeness (H3) were supported with its positively influence for the attitude confidence. This finding indicates that the more ease of use and innovativeness for devices increased, the more users' attitude confidence increased. Perceived price (H4), enjoyment (H5), Quantity of contents (H6) significantly increase user resistance. However, perceived price positively affect user innovativeness resistance meanwhile perceived enjoyment and quantity of contents negatively affect user innovativeness resistance. In addition, aesthetic exterior (H6) was also positively associated with perceived price (p<0.01). Also projection quality (H8) can increase perceived enjoyment (p<0.05). Finally, attitude confidence (H10) increased user intention to use virtual reality devices. however user resistance (H11) negatively affect user intention to use virtual reality devices. The findings of this study show that attitude confidence and user innovativeness resistance differently influence customer intention for using virtual reality devices. There are two distinct characteristic of attitude confidence: perceived ease of use and user innovativeness. This study identified the antecedents of different roles of perceived price (aesthetic exterior) and perceived enjoyment (quality of contents & projection quality). The findings indicated that brand awareness and quality of contents for virtual reality is not formed within virtual reality market yet. Therefore, firms should developed brand awareness for their product in the virtual market to increase market share.