• Journal of Fisheries and Marine Sciences Education
• /
• v.5 no.1
• /
• pp.31-44
• /
• 1993

Through the early 1900's, the evolution of the surface condenser was closely tied to the development of steam engine and the turbine. As the chemical and petroleum industries evolved in the 1900's, the use of surface condensers in many different processes. Today, industry uses condensers in many shapes and sizes. The actual condensation process occurs on the outside surface of tubes. The nature of this surface geometry affects the condenser's heat transfer performance. The first condensers were built with plain tubes. As tube manufacturing techniques advanced, manufacturers started making tubes with integral fins. In the 1940's, fin densities were limited to about 600 to 700 fins per meter(fpm) because of manufacturing procedure. Today new manufacturing techniques allow production of tubes with fin densities ranging from 750 to 1600 fpm. The integral-fin tubes investigated in this paper are nominally 19 mm diameter. Eight tubes have been used with trapezodially shaped integral-fins having fin density from 748 to 1654 fpm and 10, 30 grooves. For comparison, tests are made using a plain tube having the same inside diameter and an outside diameter equal to that at the root of the fins for the finned tubes. Betty and Katz's theoretical modelis is used to predict the R-11 condensation coefficient on horizontal integral-fin tubes having 748, 1024 and 1299 fpm. Experiments are carried out using R-11 as working fluid. The refrigerant condensates at a saturation state of $30^{\circ}C$ on the outside tube surface cooled by coolant. The amount of noncondensable gases present in the test loop is reduced to a negligible value by repeated purging. For a given heat input to the boiler and given cooling water flow rate, all test data are taken at steady state. The observed heat transfer enhancement for the finned and grooved tubes significantly exceeded that to be expected on grounds of increased area. For the eight fin tubes and one plain tube tested, the best performance has been obtained with a tube having a fin density of 1299 fpm, and a fin bight of 1.2mm and 30 grooves.

• Journal of Conservation Science
• /
• v.36 no.5
• /
• pp.315-325
• /
• 2020

The Daetongsa temple is the earliest temple to be constructed during the era of the Three Kingdoms in ancient Korea. The main architect, purpose, and name of the temple have been confirmed through ancient literature and archeological materials carved in the Chinese letter, Daetong, excavated around Gongju. However, the location and range of the temple have remained elusive and were discussed in various studies. In this study, we examine the roof tiles obtained from the presumed site of the Daetongsa temple. The tiles were found to contain traces of red paint (red pigments) on their surface and analyzed using nondestructive techniques. The results imply that roof tiles were made using clay tablets and wooden cylinders, with latticed cloth in between. Additionally, some wooden cylinders appeared to comprise numerous wooden plates tied together by strings. The clay tablets used to make the roof tiles were produced from the source clay via the sorting process. The traces of red paint on the surface of the roof tiles were verified to be traditional pigments used for painting wooden buildings. These pigments were extracted from red ocher or red clay (Seokganju), mainly consisting of iron oxide. In the literature, the location of provenance sites for Seokganju is estimated to be far from Gongju. However, the materials for extracting the red pigments were relatively easy to source because most rocks comprised iron oxides. Therefore, it is necessary to discuss the provenance of the red pigments around the presumed site of Daetongsa.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.5
• /
• pp.3-12
• /
• 2016

Recently government is set to expand its policy to promote technical proposal tendering in a dimension of technical competitiveness reinforcement. Because a variety of complicated techniques are applied in technical proposal tendering and variables could be occurred in terms of cost, schedule, constructability and others when techniques are reflected on design document collaboration management among participants is considered insignificantly. So the research would determine primary management factors and presents management direction for collaboration among participants. First action for this is categorization of hindrance factors to collaboration into five factors as 'Poor work processing', 'Communication cap among participants', 'Lack of understanding about technical proposal tendering', 'Difficulty of decision making' and 'Insufficiency in managing the work data'. Second correlation analysis is conducted between the categorized factors and participants according to tasks in technical proposal tendering to figure out the correlation degree of variables. If there is a strong correlation between variables, hindrance factor in that case regarded primary management factor to collaboration and finally management direction is presented at each task.

• Journal of Korean Academy of Nursing
• /
• v.13 no.3
• /
• pp.1-33
• /
• 1983

The role and function of nursing care nowadays, tend to acquire sophisicated technology because specialization has expended due to increase of the medical population and the improvement of national health standards. To implement nursing care independently as a professional nurse, the apprehension of specific knowledge and skill should be acquired during basic nursing education. So it is important for nursing education not only to include theory and actual techniques, but also to strengthen the practical training in the actual clinical setting. This study was carried out with the following objectives; 1. To survey the detailed content and frequency of actual nursing students display during their clinical training. 2. To investigate the detailed content and frequency of actual nursing behavior which students display in each clinical a area. 3. To identify the motive for selection of nursing as their major and to determine the degree of self confidence, extent of knowledge and recognition of nursing responsibility. 4. To observe the relationship between actual nursing behavior and each of the following; 1) Motive for selecting nursing as a major 2) Self confidence 3) Knowledge of nursing care 4) Recognition of nursing responsibility The conclusions of this study were as follows; 1. Among the detailed nursing behavior which junior nursing college students carry out in clinical training; taking respiration's showed the highest frequency, and taking body temperatures, blood pressures, and pulses and making beds were next in frequency in this order. 2. In detailed nursing behaviors according to clinical area; taking vital signs showed the highest frequency in the emergency room, pediatric ward, orthopedic ward, general surgical ward and internal medicine ward. However, in the operating room, assisting with endotracheal tube insertion and sterile techniques were showen to have the highest frequencies. In nursery, umbilical cord care and the measurement of body weight were the highest in frequency In neurosurgical ward, the measurement of vital signs, changing position and tracheostomy care were the highest in frequency. In obstetric and gynecological ward and in the delivery room, checking duration, intensity and frequency of contractions was the highest in frequency. 3. In regard to the motive for majoring in nursing, the aptitude and interest of the student had the highest percentage(32.86%), and self-confidence in nursing activities (M=3.36), knowledge in nursing activities.(M=3. 09), and the recognition of the nursing activity (M= 3.76) wire in the middle range. 4. When the detailed nursing behaviors were compared with motive, self confidence, knowledge and recognition, it was found that when the nursing behavior was difficult and regarding much endeavor although the motive was high, the frequency of the nursing behavior was rather low. But in the cases in which there was much self confidence and a high level of skill was required, nursing behavior was carried more frequently. When there was muck self confidence and skill was not required, the frequency of nursing behavior was rather low. In the cases of a high level of knowledge, the frequency of nursing behavior was low and when recognition for nursing behavior was given the frequency of nursing behavior was low.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.1
• /
• pp.31-36
• /
• 2020

Corporate Culture Marketing is a marketing tool that enhances a company's cultural image or conveys its image through culture. Culture Consumer value analysis is important predictive data in identifying the value and pursuit of life in individual consumption behavior, explaining the choice behavior of culture consumers, and serves as the basis for decision making. The research method was linked to the text mining and opinion mining techniques of big data, and extracted positive, negative and neutral words. The analysis targets culture consumers participating in concerts at Hyundai Card's 'Super Concert', which is subject to domestic consumers, and CJ ENM's 'KCON', which is subject to foreign consumers. The culture consumer value elements of corporate culture marketing are the basic conditions, and they were derived as 'Consensus Communication (Expression of Sensibility)', 'Participation Sharing(VIP Belonging)', 'Social Change Issue', 'Differentiating Services', 'Price Discount Benefit' and 'Location Quality'. In the future, we will need to foster 'Culture Technology Marketers' and apply them in areas such as arts management planning, cultural investment, cultural distribution, cultural space, Corporate Culture, CSR and K-pop marketing to enhance corporate interests and brand value and enhance brand value.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.2
• /
• pp.111-118
• /
• 2004

Techniques based on thresholding of wavelet coefficients are gaining popularity for denoising data because of the reasonable performance at the low complexity. The VisuShrink which removes the noise with the universal threshold is one of the techniques. The universal threshold is proportional to the noise deviation and the number of data samples. In general, because the noise deviation is not known, one needs to estimate the deviation for determining the value of the universal threshold. But, only for the finest scale wavelet coefficients, it has been known the way of estimating the noise deviation, so the noise in coarse scales cannot be removed with the VisuShrink. We propose here a new denoising method which removes the noise in each scale except the coarsest scale by Visushrink method. The noise deviation at each band is estimated by the monotonic transform and weighted deviation, the product of estimated noise deviation by the weight, is applied to the universal threshold. By making use of the universal threshold and the Soft-Threshold technique, the noise in each band is removed. The denoising characteristics of the proposed method is compared with that of the traditional VisuShrink and SureShrink method. The result showed that the proposed method is effective in denoising on Gaussian noise and quantization noise.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_2
• /
• pp.1031-1035
• /
• 2019

Nowadays, the utilization infrastructure of domestic satellite information is expanding rapidly. Especially, the development of agriculture and forestry satellite is expected to drastically change the utilization of satellite information in the forest sector. The launch of the satellite is expected in 2023. Therefore, NIFoS and academic experts in forest sectors have prepared "Special Issue on Forest Management Research using Optical Sensors and Remote Sensing Technologies" in order to understand new remote sensing technologies and suggest the future direction of forest research and decision-making. This special issue is focused on a variety of fields in forest remote sensing research, including forest resources survey, forest disaster detection, and forest ecosystem monitoring. The new research topics for remote sensing technologies in forest sector focuses on three points: development of new indicators and information for accurate detection of forest conditions and changes, the use of new information sources such as UAV and new satellites, and techniques for improving accuracy through the use of artificial intelligence techniques.

• Conservation Science in Museum
• /
• v.3
• /
• pp.65-69
• /
• 2001

Scientific analysis are carried on gilded ornamental shoes, which have been excavated from tomb No 1. and No 4. in Beopcheon-ri, Wonju dated from Baekje Period. This object is a very important because it provides valuable information on the development of metal-making techniques of that period. Thus, this article illustrates the investigation conducted to reveal how the object was created using what materials and techniques. Instead of the spikes-attached to the bottom plate of the object-that couldn't be sampled, a sample of a decorative rivet showing a similar structure to the spikes-attached to the other parts of the shoes-was prepared for a cross-section examination. Using radiography and microscopes, it was found that the head of a spike was placed and then punched to the gilded plate, so it can be held to the shoes. Under the SEM-EDS, the cross-section of the rivet shows that the gilding layer was applied before the attachment of the rivets. It also shows that the gilding layer is distributed unevenly and there are empty spaces indicating amalgam gilding was employed. This was confirmed as Mercury was detected on the SEM-EDS analysis of the object. The examination of the microstructure of the plate using the SEM-EDS revealed that the object is made of a single copper alloy plate with recrystallized twining and non-metallic white inclusions, which found to be lead in this case.

• (The) Research of the performance art and culture
• /
• no.33
• /
• pp.223-242
• /
• 2016

The Korean $taeg{\breve{u}}m$, a horizontal bamboo flute, is considered a representative wind instrument of Korean traditional music. Symbolized by its unique timbre and diverse techniques, this instrument transmits the beauty of Korea, and has become acknowledged even in international music scenes. Being a $taeg{\breve{u}}m$ player, composer, and ethnomusicology researcher, I have developed creative collaborations with musicians from Asian, electro-acoustic, jazz, and Western art music traditions developed outside my country of origin and tried to overcome musical boundaries through the 'intercultural performances' (after Turner 1988). Zooming in one collaboration, I detail the process of music creation and performance, collaborating with prominent Korean composer Kim $Taes{\breve{o}}ng$ (b.1967), who was commissioned by myself to write two compositions for the $taeg{\breve{u}}m$ and Western art music. The purpose is twofold: firstly, the modernization and appropriation of the Korean flute is briefly tracked down within the context of Western Art music. Secondly, a performance project is illustrated with the support of technical apparatuses such as DVD and CD recordings and delves further into the question of the 'cultural relativism' (Michael Tenzer, 2006: 7) through the interactive process. The performance-as-research, as a tool 'actualizing' (Richard Schechner 2003: 32) the hybridity, touches on critical domains in Ethnomusicology. The corresponding two parts discover, as Alan Merriam's(1964) 'tripartite model' suggests, the 'context' of Korean and Western cultures, the 'behaviour' of collaborating and performing and the 'sound' of improvised and composed productions in the course of music making.

• Journal of the Society of Disaster Information
• /
• v.17 no.2
• /
• pp.254-265
• /
• 2021

Purpose: Inspection and diagnosis on the performance and safety through domestic port facilities have been conducted for over 20 years. However, the long-term development strategies and directions for facility renewal and performance improvement using the diagnosis history and results are not working in realistically. In particular, in the case of port structures with a long service life, there are many problems in terms of safety and functionality due to increasing of the large-sized ships, of port use frequency, and the effects of natural disasters due to climate change. Method: In this study, the maintenance history data of the gravity type quay in element level were collected, defined as big data, and a predictive approximation model was derived to estimate the pattern of deterioration and aging of the facility of project level based on the data. In particular, we compared and proposed models suitable for the use of big data by examining the validity of the state-based deterioration pattern and deterioration approximation model generated through machine learning algorithms of GP and SGP techniques. Result: As a result of reviewing the suitability of the proposed technique, it was considered that the RMSE and R² in GP technique were 0.9854 and 0.0721, and the SGP technique was 0.7246 and 0.2518. Conclusion: This research through machine learning techniques is expected to play an important role in decision-making on investment in port facilities in the future if port facility data collection is continuously performed in the future.