• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1889-1896
• /
• 2011

There has been a lot of researches to develop techniques that provide redundant paths, there by making Multistage Interconnection Networks(MINs) fault tolerant. So far, the redundant paths in MINs have been realized by adding additional hardware such as extra stages or duplicated data links. This paper presents a new MIN topology called Hierarchical MIN. The proposed MIN is constructed with 2.5N-4 switching elements, which are much fewer than that of the classical MINs. Even though there are fewer hardware than the classical MINs, the HMIN possesses the property of full access and also provides alternative paths for the fault tolerant. Furthermore, since there is the short cut in HMIN for the localized communication, it takes advantage of exploiting the locality of reference in multiprocessor systems. Its performance under varying degrees of localized communication is analysed and simulated.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.205-208
• /
• 2008

Generally, there are several types in rear suspension. The rear suspension of subframe type consisting of side member and front/rear cross member is widely used in a medium car and full car. In the small car case, the beam of tubular type without independent suspension system is used to reduce manufacturing cost. The optimized rear suspension of subframe type using hydroforming method has been developed in this study. In designing suspension, the driving stability and durability performance should be considered as an important factor. The stability is related to dynamic frequency and durability is connected with stress analysis of structure. We focus on increasing the stiffness of suspension and decreasing the maximum stress relating to durability cycle life. For making use of the merits of hydroforming which is possible to make the bead, tube expansion, and feeding in desiring position, several optimization design techniques such as shape, size, and topology optimization are proposed. This optimization scheme based on the sensitivity can provide distinguished performance improvement in using hydroforming. Through commercial software based on the finite element, the superiority of this design method is demonstrated.

• Parasites, Hosts and Diseases
• /
• v.57 no.6
• /
• pp.581-585
• /
• 2019

Confocal laser scanning microscopy (CLSM) was used to examine archaeoparasitological specimens from coprolites associated with La Cueva de los Muertos Chiquitos (CMC) located near present-day Durango, Mexico. The eggs for 4 different types of parasites recovered from CMC coprolites were imaged using CLSM to assist with identification efforts. While some of the parasite eggs recovered from CMC coprolites were readily identified using standard light microscopy (LM), CLSM provided useful data for more challenging identifications by highlighting subtle morphological features and enhancing visualization of parasite egg anatomy. While other advanced microscopy techniques, such as scanning electron microscopy (SEM), may also detect cryptic identifying characters, CLSM is less destructive to the specimens. Utilizing CLSM allows for subsequent examinations, such as molecular analyses, that cannot be performed following SEM sample preparation and imaging. Furthermore, CLSM detects intrinsic autofluorescence molecules, making improved identification independent of resource and time-intensive protocols. These aspects of CLSM make it an excellent method for assisting in taxonomic identification and for acquiring more detailed images of archaeoparasitological specimens.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.5
• /
• pp.1973-1991
• /
• 2018

Multimedia applications over wireless networks have been evolving to augmented reality or virtual reality services. However, a rich data size compared to conventional multimedia services causes bandwidth bottlenecks over wireless networks, which is one of the main reasons why those applications are not used widely. To overcome this limitation, bandwidth aggregation techniques, which exploit a multi-path transmission, have been considered to maximize link utilization. Currently, most of the conventional researches have been focusing on the user end problems to improve the quality of service (QoS) through optimal load distribution. In this paper, we address the joint pricing and load distribution problem for multi-homing in heterogeneous wireless access networks (ANs), considering the interests of both the users and the service providers. Specifically, we consider profit from resource allocation and cost of power consumption expenditure for operation as an utility of each service provider. Here, users decide how much to request the resource and how to split the resource over heterogeneous wireless ANs to minimize their cost while supporting the required QoS. Then, service providers compete with each other by setting the price to maximize their utilities over user reactions. We study the behaviors of users and service providers by analyzing their hierarchical decision-making process as a multileader-, multifollower Stackelberg game. We show that both the user and service provider strategies are closed form solutions. Finally, we discuss how the proposed scheme is well converged to equilibrium points.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.145-146
• /
• 2010

This paper proposed a new concept of global healthcare system based on M2M technology with the combination of networks by using IPv6 techniques. The proposed system consists of 6LoWPAN based wearable sensors, gateway for the connection of different networks, and server program offering health information. Thus our approach presents an intelligent system which allows direct exchange of information between machines without human assistance with the epoch-making extension of measurement environment in healthcare areas appropriately.

• Journal of Industrial Technology
• /
• v.39 no.1
• /
• pp.27-31
• /
• 2019

Semiconductor logistics systems are facing difficulties in increasing production as production processes become more complicated due to the upgrading of fine processes. Therefore, the purpose of the research is to design predictive models that can predict traffic during the pre-planning stage, identify the risk zones that occur during the production process, and prevent them in advance. As a solution, we build FABs using automode simulation to collect data. Then, the traffic prediction model of the areas of interest is constructed using deep learning techniques (keras - multistory conceptron structure). The design of the predictive model gave an estimate of the traffic in the area of interest with an accuracy of about 87%. The expected effect can be used as an indicator for making decisions by proactively identifying congestion risk areas during the Fab Design or Factory Expansion Planning stage, as the maximum traffic per section is predicted.

• Journal of the Optical Society of Korea
• /
• v.18 no.3
• /
• pp.217-224
• /
• 2014

A major advantage of wavefront reconstruction based on a series of diffracted intensity images using only single-beam illumination is the simplicity of setup. Here we propose a fast-converging algorithm for wavefront calculation using single-beam illumination. The captured intensity images are resampled to a series of intensity images, ranging from highest to lowest resampling; each resampled image has half the number of pixels as the previous one. Phase calculation at a lower resolution is used as the initial solution phase at a higher resolution. This corresponds to separately calculating the phase for the lower- and higher-frequency components. Iterations on the low-frequency components do not need to be performed on the higher-frequency components, thus making the convergence of the phase retrieval faster than with the conventional method. The principle is verified by both simulation and optical experiments.

• Cross-Cultural Studies
• /
• v.35
• /
• pp.215-235
• /
• 2014

The purpose of this paper look at the basis of the cultural differences of Korean and Japan by comparing the craftsmanship. Korean craftsmanship and master craftsman making traditional handcrafts and artwork would die out at a critical moment. The craftsmanship and system could not be established because of discrimination in the traditional four classes of society( scholars, farmers, artisans and tradesmen), invasions of other countries and discontinuity of tradition from modernization. On the contrast, in Japan, it was possible to establish traditional handcrafts and artworks, technique and craftsmanship with apprentice system and various social privilege and treatment even in the same traditional four classes of society ( scholars, farmers, artisans and tradesmen). It was common to pass down the family business for a hundreds of years with self respect between Japanese master craftsmen and lots of people succeed the family business will now. Japanese craftsmanship is originated from 'worship to god' Medieval Japanese believed that the thing changes human mind, artistic talent, masterpieces and faith were connected to sacred power. Therefore, master craftsmen and their works were also made by the power of god. In this context, craftsmen were protected and treated in socially and nationally. It is that the social treatments and supports in national level and their own pride and continuous training of techniques and abilities as the main driving force to maintain the craftsmanship in Japan. Korea has the sale level of competitive tradition and technique in comparison any other countries. Japanese craftsmanship study will be a critical data in the protection and maintenance of Korean traditional and technique.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.19 no.3
• /
• pp.135-141
• /
• 2019

Background: The fear of needle insertion and pain during anesthesia is a source of patient dissatisfaction in dentistry. Inferior alveolar nerve block (IANB) remains the most common type of block and is in itself painful. Computer-controlled local anesthetic delivery (CCLAD) has been proven to reduce the pain associated with injection of anesthetics in various blocks. However, the efficacy of CCLAD for IANB in adults remains unknown. Methods: Sixty-four adult patients requiring bilateral IANB were selected and divided into two groups: group A (50 patients receiving IANB via CCLAD) and group B (50 patients receiving IANB using a conventional cartridge syringe). Pain perception and patient comfort were assessed using the visual analog scale and the 5-point semantic scale, respectively. Results: The pain perception was compared between the two groups using the Mann-Whitney U-test, and the P value was 0.003. The patient comfort was also compared using the same test, and the P value was 0.484. Conclusion: A significant difference was observed in the pain perception of the patients during CCLAD. The patient comfort was grossly equal for both techniques.

• Asia-Pacific Journal of Business
• /
• v.9 no.4
• /
• pp.99-117
• /
• 2018

This study has investigated Linear Programming (LP) applications to special decision making problems in managerial accounting with the help of spreadsheet Solver tools. It uses scenario approaches to case examples having three products and three resources in make-and-supply business operations, which is applicable to cases having more variables and constraints. Integer Programmings (IP) are applied in order to model situations when products are better valued in integer values or logical constraints are required. Three cases in one-time-only special order decisions include Goal Programming approach, Knapsack problems with 0/1 selections, and fixed-charge 0/1 integer modelling techniques for set-up operation costs. For the decisions in outsourcing problems, opportunity-costs of resources expressed by shadow-prices are considered to determine their precise contributions. It has also shown that the improvement in work-shop operation for an unprofitable product must overcome its 'reduced cost' by the sum of direct manufacturing cost savings and its shadow-price contributions. This paper has demonstrated how various real situations of special decision problem in managerial accounting can be approached without mistakes by using LP's and IP's, and how students both in accounting and management science can acquire LP skills in their education.