• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.2
• /
• pp.207-213
• /
• 1997

The purpose of this study is to aim at presenting efficient technique of 3-D Terrain Modelling through multilateral approach methods and to compare with raw data, using low-densed randomly located point data. The subject religion of this study are selected two sites and take into consideration for degree of freedom about low-densed randomly located point data. The result of this study by precision analysis of digital cartographic map-ping using low-densed randomly located point data bave shown that . First, making digital cartographic map, the technique of making it using low-desned randomly located point data by TIN-based results to good and fast run-time in A and B sites all together. Second, the visualization analysis results of digital cartographic map using TIN and GRID-based terrain modeling techniqus similar exacts A and B sites, but the terrain modeling techniqus by TIN-based are small data size than GRID-based with the data with the data size of saving with DXF files. Third, making digital catographic map using terrain modeling techniques by Grid-based, the standard errors of low-densed randomly located point data and interpolated data using gridding method have more good results by radial basis function interpolation techniques at A and B sites all together.

• Journal of Korea Water Resources Association
• /
• v.46 no.2
• /
• pp.99-109
• /
• 2013

Increasing complexity of the basin environments makes it difficult for single decision maker to consider all relevant aspects of problem, and thus the uncertainty of decision making grows. This study attempts to develop an approach to quantify the spatial flood vulnerability of South Korea. Fuzzy TOPSIS is used to calculate individual preference by each group and then three GDM techniques (Borda count method, Condorcet method, and Copeland method) are used to integrate the individual preference. Finally, rankings from Fuzzy TOPSIS, TOPSIS, and GDM are compared with Spearman rank correlation, Kendall rank correlation, and Emond & Mason rank correlation. As a result, the rankings of some areas are dramatically changed by the use of GDM techniques. Because GDM technique in regional vulnerability assessment may cause a significant change in priorities, the model presented in this study should be considered for objective flood vulnerability assessment.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.1 no.1 s.1
• /
• pp.65-78
• /
• 2003

This research is to provide practical help in learning hair and makeup illustration skills by presenting techniques for hair and makeup drawing; to serve efficient illustration education; and to enhance the status of beauty and contribute to artistic development. Hair style and makeup techniques include graphical one, pattern-centered one, one using pattern paper, simplifying one and mood one expressing image. Of them, this research made the illustrations to use cosmetics, color pencils and pastel based on the graphical technique. for each design of the illustrations, ethnic, sexy, natural, romantic and gorgeous images, which were considered to be appropriate to the graphical technique, were chosen by the researcher out of hair and makeup styles that appeared in the fashion magazines including Vogue, Gap, Mode et Mode from 2000 through 2001. In particular, they were chosen with focusing on basic styles. The summaries below were found with the experience of making illustrations. Various techniques and skills are required to express the ideas of hair and makeup styles. Of them, the graphical technique is very useful as the primary step to learn various techniques and improve drawing skills. First, the graphical technique may enable not only expressing what is desired to draw as is, but also accurately representing hair and makeup designs so as to convey objective expression. In this regard, it is a proper way to achieve its inherent purpose as conveyance of messages. Second, more accurate styling of hair and makeup is available through graphical expression, which helps understand related practical techniques. In addition, makeup illustration, which is expressed through direct makeup products and instruments, may serve skill improvement since such direct use provides the feeling of real makeup. Third, the graphical technique as a basic drawing skill may unrestrictedly show the artist's expression ability. Fourth, although artistic merits implying individuality and creativity should be shared through illustrations that express the artist's ideas or emotions, the graphical technique is the easiest method to beginners who just started learning of illustration, in that it enables expression without highly advanced skills.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.14 no.3
• /
• pp.37-49
• /
• 2012

The purpose of this study is to provide basic data of dress design by researching three-dimensional decorative techniques representing flowers, a popular motif in dress design. This study analyzed 44 dresses that were presented in Valentino collection. The result of this study is as follows: First, the detailing expression method can show various patterns and colors through embroidery technique, sub-materials, and bonding techniques in embroidery, beads flower, and ribbon flowers. Second, the fabric flower technique expressed flower image in three-dimension in more various images than do either the ribbon or beads flower technique. Fabric flowers are mostly made from the same material as dresses. The expression technique of fabric flower is classified into the following three classifications: 1) A technique underlying a flower image with one, two and three large flowers, 2) a technique decorating a large area with a number of an identical motif, and 3) a technique highlighting a part of the body or design line by attracting eyes to one point, creating a corsage decorated where a designer wants to emphasize. Third, a silhouette technique realizes a flower image with a silhouette of a dress like sculpted structure and it is thus used less than a detailing expression technique. A flower image is expressed by making use of body lines or emphasizing the face. Finally, flower images on a dress were realized as a full blossomed flower, through visually streamlined shapes and curved lines.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1886-1898
• /
• 2015

In today’s era of advanced technological developments, the threats to the authenticity and integrity of digital images, in a nutshell, the threats to the Image Forensics Research communities have also increased proportionately. This happened as even for the ‘non-expert’ forgers, the availability of image processing tools has become a cakewalk. This image forgery poses a great problem for judicial authorities in any context of trade and commerce. Block matching based image cloning detection system is widely researched over the last 2-3 decades but this was discouraged by higher computational complexity and more time requirement at the algorithm level. Thus, for reducing time need, various dimension reduction techniques have been employed. Since a single technique cannot cope up with all the transformations like addition of noise, blurring, intensity variation, etc. we employ multiple techniques to a single image. In this paper, we have used Fuzzy logic approach for decision making and getting a global response of all the techniques, since their individual outputs depend on various parameters. Experimental results have given enthusiastic elicitations as regards various transformations to the digital image. Hence this paper proposes Fuzzy based cloning detection and classification system. Experimental results have shown that our detection system achieves classification accuracy of 94.12%. Detection accuracy (DAR) while in case of 81×81 sized copied portion the maximum accuracy achieved is 99.17% as regards subjection to transformations like Blurring, Intensity Variation and Gaussian Noise Addition.

• Journal of the Korea Furniture Society
• /
• v.27 no.2
• /
• pp.69-79
• /
• 2016

This paper explores the inlaying technique of Geum-Cheol Kim, a joiner has made the traditional Korean furniture mostly popular in Tong Yeong in Gyeongnam province in Korea. He has adopted the technique in creating his furniture since he started learning and working the furniture making at sixteen years old. So he is only the cabinet maker with the technique in Tong Yeong GN. Samhojang, Seongtaenoemun, Gwuinoemun, and so on are the techniques inlaid in the furniture like Jang, Nong, Beoseonjang, Mungap and so on. The Tong-yeong techniques are even more difficult and take longer time than other ordinary inlays to be created, but they are very secured and last longer. And the techniques are very beautiful but today they are not well-known and used in Korea. Hence, the succession and preservation of the techniques are needed from the joiner to younger generation. Futhermore, the development on the easier and shorter process to create them is needed to be popular throughout Korea in order to be useful for contemporary furniture.

• Korean Journal of Cleft Lip And Palate
• /
• v.15 no.2
• /
• pp.97-108
• /
• 2012

Velopharyngeal insufficiency (VPI) is improper closure of velopharynx during the phonation and swallowing due to various causes, especially appeared in cleft palate patients. The several surgical techniques and speech therapy can be considered in treatment of VPI. The surgical techniques such as Furlow's double opposing Z-plasty, pharyngeal flap, push-back palatoplasty, etc. have been widely used when the speech therapy is not so much effective. However, there is considerable variability in the methods for evaluation and in success criteria making difficult to compare among surgical techniques. This article reviewed the recent articles about comparing the surgical techniques in treatment of VPI. Although there is no significant difference in speech assessment by speech pathologist, Furlow's double opposing Z-plasty is a useful technique especially diminishing hypernasality and nasal emission.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.1
• /
• pp.145-164
• /
• 2023

Cloud computing offers a platform that is both adaptable and scalable, making it ideal for outsourcing data for sharing. Various organizations outsource their data on cloud storage servers for availing management and sharing services. When the organizations outsource the data, they lose direct control on the data. This raises the privacy and security concerns. Cryptographic encryption methods can secure the data from the intruders as well as cloud service providers. Data owners may also specify access control policies such that only the users, who satisfy the policies, can access the data. Attribute based access control techniques are more suitable for the cloud environment as they cover large number of users coming from various domains. Multi-authority attribute-based encryption (MA-ABE) technique is one of the propitious attribute based access control technique, which allows data owner to enforce access policies on encrypted data. The main aim of this paper is to comprehensively survey various state-of-the-art MA-ABE schemes to explore different features such as attribute and key management techniques, access policy structure and its expressiveness, revocation of access rights, policy updating techniques, privacy preservation techniques, fast decryption and computation outsourcing, proxy re-encryption etc. Moreover, the paper presents feature-wise comparison of all the pertinent schemes in the field. Finally, some research challenges and directions are summarized that need to be addressed in near future.

• Human Ecology Research
• /
• v.61 no.1
• /
• pp.53-71
• /
• 2023

Dressmaking is a high value-added sector of the fashion industry in which the individuality and skills of designers play a prominent role. The appropriate use of the draping and the flat pattern techniques in the dressmaking process also play an important part in perfecting the finished product. The purpose of this study was to improve the understanding of dress design and identify a pattern production technique to enhence efficiency in each of the three elements of the dress manufactureing process. For this purpose, analysis of the design of 1,389 wedding dress photographs published in Wedding 21, Korea's leading wedding magazine, during 2019 and 2020 was conducted. This analysis identified 15 bodice designs and 11 sleeve designs based on neckline and eight skirts based on silhouette which were ranked by frequency distribution. Patterns for the design of samples were then developed according to the highest combined frequency distribution of these three elements. Eight samples were finally produced to test the the efficiency of the patternmaking techniques empolyed and the selected designs. The findings from this study have practical applications, notably in improving the efficiency of pattern production techniques that will facilitate further growth in the dressmaking industry.

• Journal of Fashion Business
• /
• v.27 no.6
• /
• pp.66-84
• /
• 2023

Handbags are a part of fashion and while their significance and value are increasing, research on this topic is lacking. This study defines handbags and categorizes the materials used for making handbags, sewing methods, expression techniques, and terminologies related to accessories. A total of 1,743 handbags that were released from the Spring 2020 to Fall 2023, Ready-to-Wear collections by 8 selected brands (Hermes, Dior, Fendi, Chanel, Louis Vuitton, Prada, Gucci, and Alexander McQueen), were analyzed. Out of these, 732 unique designs, excluding those with only color variations, were studied. The most common sewing methods were 'Cut, sewing, and edge painting', 'Cylinder arm sewing', 'Cut, edge painting, and sewing', and 'Inverted seam', in that order. Slim strap designs primarily used the 'Cut, sewing, and edge painting' method, whereas the body, especially with narrow and hard leather, was best suited for the 'Cylinder arm sewing machine'. For expression techniques, the most frequently used methods were 'Quilting', 'Metal Eyelet', 'Embossing', 'Printing', 'Punching', and 'Weaving', respectively. The characteristics of each brand's production methods, expression techniques, and accessories were as follows: First, the exposure of logos and monograms is prominent. Unlike clothing, handbags often prominently feature the brand's logo or monogram. Second, signature quilting is a prominent feature. Quilting effectively conveys the brand's signature style, providing cushioning, volume, and pattern effects. Third, sustainable development is a growing trend. Brands are increasingly applying eco-friendly and socially responsible designs.